| 1029 - 1030 |
In memoriam : Joseph A. Biesenberger 1935-1998
Gogos C |
| 1031 - 1038 |
Effects of pressure sensitivity and notch geometry on notch-tip fields
Al-Abduljabbar A, Pan J |
| 1039 - 1047 |
The cause of the grey discoloration of PET prepared by the use of antimony-catalysts
Aharoni SM |
| 1048 - 1059 |
An experimental comparison of cooling time for cylindrical plastic components using heat conduction models in the non-conservative and conservative forms
Dubay R, Bell AC |
| 1060 - 1071 |
An experimental study on the effect of polymer viscoelasticity on layer rearrangement in coextruded structures
Dooley J, Hyun KS, Hughes K |
| 1072 - 1084 |
Modeling warpage in reinforced polymer disks
Fahy EJ |
| 1085 - 1098 |
Investigation of gas-assisted injection molding. Part III : Effect of gas channel design on part bending strength
Chen SC, Hu SY, Huang JS, Chien RD |
| 1099 - 1111 |
Numerical simulation of multi-layer flow for polymer melts - A study of the effect of viscoelasticity on interface shape of polymers within dies
Matsunaga K, Kajiwara T, Funatsu K |
| 1112 - 1120 |
Extrusion of PE/PS blends with supercritical carbon dioxide
Lee MH, Tzoganakis C, Park CB |
| 1121 - 1132 |
Hot plate welding of polypropylene. Part I : Crystallization kinetics
Nieh JY, Lee LJ |
| 1133 - 1141 |
Hot plate welding of polypropylene. Part II : Process simulation
Nieh JY, Ni J, Lee LJ |
| 1142 - 1148 |
Rheological properties of fumed silica filled Bis-GMA dispersions
Kim SW, Jang JS |
| 1149 - 1153 |
Comparison of oxidation induction time measurements with values derived from oxidation induction temperature measurements for EPDM and XLPE polymers
Mason LR, Reynolds AB |
| 1154 - 1166 |
Prediction of equilibrium polymer blend morphology in dispersed two-phase flow and comparison with experiment
Han CD, Sun JS, Chuang HK, Lee JK |
| 1167 - 1173 |
The effect of surface tension on extrudate swell from square and rectangular channels
Gifford WA |
| 1174 - 1184 |
Rheological and mechanical relaxation behavior of a thermally crosslinkable poly(ethylene terephthalate)
Mather PT, Romo-Uribe A |
| 1185 - 1192 |
Effects of surface modification by Ar+ irradiation on weftability of surfaces of poly(ethylene terephthalate) films
Park SC, Koh SK, Pae KD |
| 1193 - 1198 |
Determination of the degree of fill in a counter-rotating twin screw extruder
Van der Goot AJ, Poorter O, Janssen LPBM |
| 1199 - 1204 |
Grooved feed single screw extruders - Improving productivity and reducing viscous heating effects
Davis BA, Gramann PJ, Noriega MD, Osswald TA |
| 1205 - 1215 |
Processing and characterization of microcellular foamed high-density polyethylene/isotactic polypropylene blends
Doroudiani S, Park CB, Kortschot MT |
