Powder Technology

Powder Technology, Vol.360 Entire volume, number list

ISSN: 0032-5910 (Print)

In this Issue (122 articles)

1 - 9	Preconcentration of ultrafine ilmenite ore using a superconducting magnetic separator Shen SP, Yuan ZT, Liu JT, Meng QY, Hao HQ
10 - 20	Flame propagation of corn starch in a modified Hartmann tube with branch structure Han B, Li G, Yuan CM, Wang QS
21 - 32	Packing of different shaped tetrahedral particles: DEM simulation and experimental study Zhao B, An XZ, Wang Y, Zhao HY, Shen LL, Sun XD, Zou RP
33 - 42	CFD-DEM study of the effects of food grain properties on drying and shrinkage in a fluidised bed Azmir J, Hou QF, Yu AB
43 - 54	Comparison of techniques for measuring CFB solids circulation rates at low and high temperatures Rahman MH, Bi XTT, Grace JR, Lim CJ
55 - 64	Chromium (VI) adsorption and reduction by humic acid coated nitrogen-doped magnetic porous carbon Zhang T, Wei S, Waterhouse GIN, Fu L, Liu L, Shi WJ, Sun JC, Ai SY
65 - 79	Ignition mechanism and characteristics of gel fuels based on oil-free and oil-filled cryogels with fine coal particles Glushkov DO, Kuznetsov GV, Nigay AG, Yanovsky VA, Yashutina OS
80 - 95	Structure and magnetic properties of milled maraging steel powders Thotakura GV, Goswami R, Jayaraman TV
96 - 103	High electrorheological effect in Bi1.8Fe1.2SbO7 suspensions Egorysheva AV, Kraev AS, Gajtko OM, Kusova TV, Baranchikov AE, Agafonov AV, Ivriov VK
104 - 111	Granular flow in a silo discharged with a conveyor belt Gella D, Maza D, Zuriguel I
112 - 119	Mass flow rate measurement of bulk solids based on microwave tomography and microwave Doppler methods Zou J, Liu CG, Wang HG, Wu ZP
120 - 128	Numerical study on the influence of fine particle deposition characteristics on wall roughness Hong WP, Wang BH, Zheng JX
129 - 140	Unravelling the consequences of ultra-fine milling on physical and chemical characteristics of flax fibres Mayer-Laigle C, Bourmaud A, Shah DU, Follain N, Beaugrand J
141 - 150	Comparison between Lagrangian and Eulerian approaches for prediction of particle deposition in turbulent flows Xu ZM, Han ZM, Qu HW
151 - 164	Properties of 316L formed by a 400 W power laser Selective Laser Melting with 250 mu m layer thickness Shi WT, Wang P, Liu YD, Hou YJ, Han GL
165 - 176	Synthesis and performance characterization of a novel wetting cementing agent for dust control during conveyor transport in coal mines Zhou G, Ding JF, Ma YL, Li SL, Zhang MG
177 - 192	Effect of bend angle on granular size segregation in the chute flow under periodic flow inversion Mantravadi B, Tan DS
193 - 208	Fluid flow and heat transfer characteristics over a superelliptic cylinder at incidence Zhang N, Rong LW, Dong KJ, Zeng QD
209 - 220	Probabilistic characterization and simulation of realistic particle shape based on sphere harmonic representation and Nataf transformation Nie JY, Li DQ, Cao ZJ, Zhou B, Zhang AJ
221 - 230	Influence of sucrose reduction on powder and reconstitution properties of powdered cocoa malted beverage Wee JJY, Chan RX, Seow YX, Viton F, Zhou WB
231 - 240	Suppression characteristics of double-layer wire mesh on wheat dust flame Dai HM, Wang XT, Chen XF, Nan X, Hu Y, He S, Yuan BH, Zhao Q, Dong ZQ, Yang P
241 - 252	Particle tracking velocimetry of porous sphere settling under gravity: Preparation of the model porous particle and measurement of drag coefficients Ma L, Xu SL, Li X, Guo Q, Gao DY, Ding Y, Ye M, Liu ZM
253 - 263	Experimental and numerical investigation on heap formation of granular soil sparsely cemented by bacterial calcification Kashizadeh E, Mukherjee A, Tordesillas A
264 - 277	A forcing fictitious domain method to simulate fluid-particle interaction of particles with super-quadric shape Wu MQ, Peters B, Rosemann T, Kruggel-Emden H
278 - 288	A general methodology and the correlation for the prediction of the solids flow rates through the L-valves He PF, Fan LS
289 - 300	Effect of adhesion on clogging of microparticles in fiber filtration by DEM-CFD simulation Tao R, Yang MM, Li SQ
301 - 311	Production and characterization of aluminum powder derived from mechanical saw chips and its processing through powder metallurgy Rojas-Diaz LM, Verano-Jimenez LE, Munoz-Garcia E, Esguerra-Arce J, Esguerra-Arce A
312 - 323	Discrete element modeling of particle breakage considering different fragment replacement modes Zhou W, Wang D, Ma G, Cao XX, Hu C, Wu W
324 - 336	Image-based size analysis of agglomerated and partially sintered particles via convolutional neural networks Frei M, Kruis FE
337 - 351	On mechanical activation of glauconite: Physicochemical changes, alterations in cation exchange capacity and mechanisms Singla R, Alex TC, Kumar R
352 - 365	PTV experiments and DEM simulations of the coefficient of restitution for irregular particles impacting on horizontal substrates Jiang ZC, Du JJ, Rieck C, Buck A, Tsotsas E
366 - 371	A note on an article, titled "Simulation and validation of a model for a batch wall-heated fluidized bed dryer" Ghalavand A, Ghalavand Y
372 - 382	Effect of geometric form of concrete meso-structure on its mechanical behavior under compression Yang X, Dai HZ
383 - 391	Bioactive compounds-rich powders: Influence of different carriers and drying techniques on the chemical stability of the Hibiscus acetosella extract Mar JM, da Silva LS, Lira AC, Kinupp VF, Yoshida MI, Moreira WP, Bruginski E, Campos FR, Machado MB, de Souza TP, Campelo PH, Bezerra JD, Sanches EA
392 - 397	Evaluation of the effect of hydraulic shear intensity on coal-slime water flocculation in a gradient fluidized bed Lin Z, Sun XL, Wang QW, Cao JW, Wang CZ, Kuang YL
398 - 410	Experimental and computational analysis of a cyclone separator with a novel vortex finder Li Q, Wang QG, Xu WW, Zhu ZL, Zhu KH
411 - 420	Fundamental investigation on the effects of ammonium polyphosphate on flame propagation behaviors of starch dust deflagration Wang LC, Yuan BH, Zhang HM, Jiang SH
421 - 429	Experimental investigation of acoustic agglomeration of diesel engine exhaust particles using new created acoustic chamber Kilikeviciene K, Kacianauskas R, Kilikevicius A, Maknickas A, Matijosius J, Rimkus A, Vainorius D
430 - 443	Densification behavior of ultrafine W-Ni-Fe composite powders produced by a two-stage reduction process Li ZB, Zhang GH, Chou KC
444 - 451	Electrostatic powder coated osmotic pump tablets: Influence factors of coating powder adhesion and film formation Yang QL, Yuan F, Ma YL, Shi KQ, Yang GS, Zhu J
452 - 461	Investigation on particle motions and resultant impact erosion on quartz crystals by the micro-particle laden waterjet and airjet Zhang L, Ji RQ, Fu YF, Qi H, Kong FZ, Li HN, Tangwarodomnukun V
462 - 480	Investigation on the multiphase sink vortex Ekman pumping effects by CFD-DEM coupling method Li L, Qi H, Yin ZC, Li DF, Zhu ZL, Tangwarodomnukun V, Tan DP
481 - 492	Particle near-neighbour separation index for quantification of segregation of granular material Chibwe DK, Evans GM, Doroodchi E, Monaghan BJ, Pinson DJ, Chew SJ
493 - 502	Effects of particle sizes on compressive deformation and particle breakage of gangue used for coal mine goaf backfill Li M, Li AL, Zhang JX, Huang YL, Li JM
503 - 508	Green one-step roasting method for efficient extraction of vanadium and chromium from vanadium-chromium slag Li HY, Wang CJ, Lin MM, Guo Y, Xie B
509 - 521	Selective laser melting of CoCrFeNiMn high entropy alloy powder modified with nano-TiN particles for additive manufacturing and strength enhancement: Process, particle behavior and effects Li B, Zhang L, Xu Y, Liu ZY, Qian B, Xuan FZ
522 - 533	Intensification of uniflow cyclone performance at low loading Pillei M, Kofler T, Wierschem A, Kraxner M
534 - 548	Identification of regime transition from bubbling to turbulent fluidization through dynamic phase tracking method Wang HL, Zhu J, Huang WX, Zhang H
549 - 554	Rearrangement of irregular sand particles in a rotary drum after Cheek for avalanche flow Chen Q, Yang H, Li R, Xiu WZ, Zheng G, Kong P
555 - 561	Investigation of the oxidation induration mechanism of Hongge vanadium titanomagnetite pellets with different Al2O3 additions Li W, Fu GQ, Chu MS, Zhu MY
562 - 568	Prediction of particles separation in narrow inclined channels of liquid-solid fluidized bed He SR, Li YF, Liu TS, Li ZY, Chen P, Zhao YF, Liang L, Zhang J
569 - 576	A new experimental approach to examination of orientation distribution of cylindrical particles in random packed beds Marek M, Niegodajew P
577 - 587	Impact of vertical internals on the hydrodynamics and separation performance of a gas-solid separation fluidized bed Lv B, Deng XW, Luo ZF, Fu YH, Chen CS, Xu X
588 - 597	Revealing the dependence of graphene concentration and physicochemical properties on the crushing strength of co-granulated fertilizers by wet granulation process Kabiri S, Tran DNH, Baird R, McLaughlin MJ, Losic D
598 - 607	Efficient measurement of the percolation threshold for random systems of congruent overlapping ovoids Li MQ, Chen HS, Lin JJ
608 - 621	Numerical simulation of the effect of fine fraction on the flowability of powders in additive manufacturing Ma YF, Evan TM, Philips N, Cunningham N
622 - 634	Capillary bridges between spherical particles under suction control: Rupture distances and capillary forces Zhao CF, Kruyt NP, Millet O
635 - 648	Hydrodynamics of solid and liquid phases in a mixing tank containing high solid loading slurry of large particles via tomography and computational fluid dynamics Kazemzadeh A, Ein-Mozaffari F, Lohi A
649 - 657	Studies on the fluidization performance of a novel fluidized bed reactor for iron ore suspension roasting Tang ZD, Gao P, Sun YS, Han YX, Li EL, Chen J, Zhang YH
658 - 672	Particle-scale characteristics of the three distinct regions in the multi-chamber slot-rectangular spouted bed Yang SL, Wang H, Wei YG, Hu JH, Chew JW
673 - 682	Modelling heterogeneous coal-rock (HCR) failure patterns under dynamic impact loads using image-based finite element (FE) and discrete element (DE) model Zheng KH, Qiu BJ, Wang ZY, Li JP, Gao KD
683 - 694	Influences of ventilation velocity on dust dispersion in coal roadways Hu SY, Liao Q, Feng GR, Huang YS, Shao H, Gao Y, Hu F
695 - 703	Effect of copper foam on explosion suppression at different positions in the pipe Shao H, Wang C, Yu HK
704 - 714	Effect of particle size and concentration on the migration behavior in porous media by coupling computational fluid dynamics and discrete element method Feng QH, Cha LM, Dai CL, Zhao G, Wang S
715 - 730	Induction time and zeta potential study of nucleating and growing struvite crystals for phosphorus recovery improvements within fluidized bed reactors Fromberg M, Pawlik M, Mavinic DS
731 - 740	Time- and temperature-dependent rheological properties of cemented paste backfill that contains superplasticizer Haruna S, Fall M
741 - 746	Preparation and characterization of anhydrous magnesium carbonate under the present of potassium ions solution Dong WT, Liu RJ, Zhao H, Han XS
747 - 768	Analysis and discussion of two fluid modelling of pipe flow of fully suspended slurry Messa GV, Matousek V
769 - 779	A numerical study on adhesive collision between a micro-sized particle and a wall Fang Z, Zhang YY, Wei MZ, Zhao SM, Wu XX, Sun LB
780 - 788	Kinetic theory for multi-particulate flow: Description of granular flow with rotary movement of particles Rahaman MF, Sarhan AR, Naser J
789 - 817	Pulsatile flow of power-law fluids over a sphere: Momentum and heat transfer characteristics Mishra G, Patel SA, Chhabra RP
818 - 834	Study of the discharge behavior of Rosin-Rammler particle-size distributions from hopper by discrete element method: A systematic updates analysis of mass flow rate, segregation and velocity profiles Kumar R, Gopireddy SR, Jana AK, Patel CM
835 - 845	Numerical study of particle injection into a gas-solid fluidized bed Liu Y, Tian SH, Li SS, Yang Y, Huang ZL, Sun JY, Liao ZW, Wang JD, Yang YR, Yang J
846 - 854	Pilot-scale study on enhanced carbothermal reduction of low-grade pyrolusite using microwave heating Li KQ, Chen J, Peng JH, Ruan R, Srinivasakannan C, Chen G
855 - 862	Nanoalloying of clusters of immiscible metals and the formation of bimetallic nanoparticles in the conditions of non-synchronous explosion of two wires Pervikov AV, Suliz KV, Lerner MI
863 - 871	Activation of hydration properties of iron ore tailings and their application as supplementary cementitious materials in cement Yao G, Wang Q, Wang ZM, Wang JX, Lyu XJ
872 - 881	Fluidization characteristics in a vibrated gas-fluidized bed of Geldart D particles based on the collaborative measurement by impact force sensor and high-speed image analysis system Wang S, Wu WW, Yang XL, Zhao YM
882 - 889	Wireless detector for translational and rotational motion of spherical-particle flow Zhu YH, Yang H, Li R, Zhang YJ, Chen Q, Hua YS, Sun QC, Kong P
890 - 910	Determination of the optimal axial-to-radial flow ratio of the wall-mounted swirling ventilation in fully mechanized excavation face Li YJ, Wang PF, Liu RH, Jiang YD, Han H
911 - 920	Measurements of wall-media contact forces and work in a vibratory finisher Maciel LS, Spelt JK
921 - 936	Deep learning based system identification of industrial integrated grinding circuits Miriyala SS, Mitra K
937 - 943	Effect of compact spherical potassium 12-tungstosilicate and lithium heteropolytungstate additives on the rheology and surface chemistry of washed spherical and platelet alpha-Al2O3 suspensions: Patch charge bridging Zhang W, Sun CB, Leong YK, Parsons D
944 - 955	Impact of polydispersity of particle shape and size on percolation threshold of 3D particulate media composed of penetrable superellipsoids Lin JJ, Chen HS, Liu L
956 - 966	Investigations of a new combined application of nanofluids in heat recovery and air purification Yang L, Huang JN, Ji WK, Mao M
967 - 976	Development of a standard calibration procedure for the DEM parameters of cohesionless bulk materials - Part II: Efficient optimization-based calibration Richter C, Rossler T, Kunze G, Katterfeld A, Will F
977 - 988	Agglomeration of stoichiometric hydroxyapatite: Impact on particle size distribution and purity in the precipitation and maturation steps Tourbin M, Brouillet F, Galey B, Rouquet N, Gras P, Chebel NA, Grossin D, Frances C
989 - 997	Preparation techniques for micron-sized particulate samples in X-ray microtomography Ditscherlein R, Leissner T, Peuker UA
998 - 1005	Effect of powder characteristics on production of oxide dispersion strengthened Fe-14Cr steel by laser powder bed fusion Vasquez E, Giroux PF, Lomello F, Nussbaum M, Maskrot H, Schuster F, Castany P
1006 - 1016	Research on the air flow distribution law on the driving face based on wall-attached jet dust control Zhang XT, Cao SG, Li DW, Sui JJ, Xu K
1017 - 1027	CFD-DEM simulation of fluidization of multisphere- modelled cylindrical particles Farivar F, Zhang H, Tian ZF, Gupte A
1028 - 1036	Effects of particle size and ferric hydroxo complex produced by different grinding media on the flotation kinetics of pyrite Zhang XL, Han YX, Gao P, Li YJ, Sun YS
1037 - 1046	The surface structure and the active layer depth of the irregular sand particles in a continuously avalanching flow Qiang ZD, Wang BD, Li R, Chen Q, Zheng G, Zivkovic V, Yang H
1047 - 1054	Dynamic ball indentation for powder flow characterization Tirapelle M, Santomaso AC, Hare C
1055 - 1066	Feeding spent coffee ground powders with a non-mechanical L-valve: Experimental analysis and TFM simulation Sousa LM, Ferreira MC, Hou QF, Yu AB
1067 - 1078	Numerical study on hydrodynamics and explosion hazards of corn starch at high-temperature environments Wang D, Qian XM, Wu DJ, Ji TC, Zhang Q, Huang P
1079 - 1091	Agglomeration potential evaluation of industrial Mn dusts and sludges based on physico-chemical characterization Dubos JL, Orberger B, Milazzo JM, Blancher SB, Wallmach T, Lutzenkirchen J, Banchet J
1092 - 1101	Comparison of different effective diameter calculating methods for sphero-cylinders by geometrically exact DEM simulations Yu FH, Zhang Y, Zheng Y, Han MZ, Chen GJ, Yao ZH
1102 - 1116	An efficient 3D DEM-FEM contact detection algorithm for tire-sand interaction Yang P, Zang MY, Zeng HY
1117 - 1125	Effect mechanism of the iso-propanol substituent on amine collectors in the flotation of quartz and magnesite Liu WB, Peng XY, Liu WG, Wang XY, Zhao Q, Wang BY
1126 - 1133	Optimization and tracking of coating processes of pellets with polyvinylpyrrolidone solutions in an acoustic levitator Wong DL, Wirsching AL, Betz K, Reinbeck A, Moritz HU, Pauer W
1134 - 1142	The impact of sonication and stirring durations on the thermal conductivity of alumina-liquid paraffin nanofluid: An experimental assessment Chen ZX, Shahsavar A, Al-Rashed AAAA, Afrand M
1143 - 1156	A comparative investigation on the accuracy of magnetic force models in ferrohydrodynamics Goharkhah M, Bezaatpour M, Javar D
1157 - 1166	Effect of perlite particles on the filtration properties of high-density barite weighted water-based drilling fluid Bageri BS, Adebayo AR, Al Jaberi J, Patil S
1167 - 1176	Lecithin-based modified soft agglomerate composite microparticles for inhalable montelukast: Development, tolerability and pharmacodynamic activity Abdel-Gawad R, Osman R, Awad GAS, Mortada N
1177 - 1191	The impact of self-sustained oscillations on particle residence time in a commercial scale spray dryer Jubaer H, Afshar S, Le Maout G, Mejean S, Selomulya C, Xiao J, Chen XD, Jeantet R, Woo MW
1192 - 1199	Hierarchical micro/nanofibrous filter for effective fine-particle capture Liu YS, Qian XM, Wang L, Qian Y, Bai H, Wang XB
1200 - 1209	Multi-parameter optimization of rigid-flexible coupled elastic rod screening for moist coal Huang L, Zhao YM, Jiang HS, Dong L, Duan CL, Qiao JP, Han J, Pan M
1210 - 1219	Experimental and numerical investigation on the packing of binary mixtures of spheres and ellipsoids Li CX, Zhou ZY, Zou RP, Pinson D, Shen YS, Yu AB
1220 - 1226	Preparation and dissolution characteristic evaluation of carvedilol-Kollicoat IR solid dispersions with HPMC and MC as combined carriers Xi ZY, Zhang W, Gao ZS, Xie LY, Chen L, Cui MS, Xi YR, Xu L
1227 - 1236	Multistep reduction kinetics of Fe3O4 to Fe with CO in a micro fluidized bed reaction analyzer He K, Zheng Z, Chen ZW
1237 - 1252	A large eddy simulation study of cyclones: The effect of sub-models on efficiency and erosion prediction Tofighian H, Amani E, Saffar-Avval M
1253 - 1270	Comparison of different drag models in CFD-DEM simulations of spouted beds Marchelli F, Hou QF, Bosio B, Arato E, Yu AB
1271 - 1277	Atomic force microscopy to identify dehydration temperatures for small volumes of active pharmaceutical ingredients Atamanuk K, Thomas MC, Wadams RC, Linthicum W, Yu WL, Huey BD
1278 - 1294	CFD-DEM Modeling of soluble NaCl particles conveyed in brine Uzi A, Halevy GB, Levy A
1295 - 1304	The effect of particle shape on porosity of swelling granular materials: Discrete element method and the multi-sphere approximation Sweijen T, Hassanizadeh SM, Aslannejad H, Leszczynski S
1305 - 1320	Grain-scale reconstruction and simulation of coal mechanical deformation and failure behaviors using combined SEM Digital Rock data and DEM simulator Xu H, Wang G, Fan C, Liu XL, Wu MM
1321 - 1336	Numerical study on granule aggregation and breakage in fluidized bed granulation by a novel PBM with DEM-CFD coupling approach Hayashi K, Nakamura H, Watano S
1337 - 1347	DEM study of the porosity distribution of pellet sandpile formed by ternary size particles Wei H, Ge Y, Li M, Li Y, Saxen H, He ZJ, Yu YW
1348 - 1354	Reaction mechanism study of new scheme using elemental sulfur for conversion of barite to barium sulfide Zhang W, Zhang FZ, Ma LP, Yang J, Yang J, Xiang HP
1355 - 1367	Effect of external electric field on particle impact charging process Hu JW, Liang C, Han C, Zhou Q, Ma JL, Liu DY, Chen XP
1368 - 1376	LDV measurements of particle fluctuation velocities in dilute gravity-driven gas-particle flows Feng H, Meng AH, Zhang YG, Gong YL, Li QH
1377 - 1387	EMMS-based solid stress model for the multiphase particle-in-cell method Jiang Y, Li F, Ge W, Wang W