| 603 - 603 |
Special issue - "Selected papers of the proceedings of the 5th European Meeting on Chemical Industry and Environment, EMCNE 2006" held in Vienna, Austria, 3-5 May 2006 - Preface
Hoflinger W |
| 604 - 613 |
Gaseous emissions from waste combustion
Werther J |
| 614 - 619 |
Separation technologies for sludge dewatering
Wakeman RJ |
| 620 - 626 |
Comparison of nutrients degradation in small scale membrane bioreactors fed with synthetic/domestic wastewater
Bracklow U, Drew A, Vocks M, Kraume M |
| 627 - 633 |
Photocatalytic oxidation of 2,4,6-trichlorophenol in water using a cocurrent downflow contactor reactor (CDCR)
Ochuma IJ, Fishwick RP, Wood J, Winterbottoom JM |
| 634 - 638 |
Removal of chromium from electroplating industry effluents by ion exchange resins
Cavaco SA, Fernandes S, Quina MM, Ferreira LM |
| 639 - 644 |
Hydrothermal oxidation: Application to the treatment of different cutting fluid wastes
Sanchez-Oneto J, Portela JR, Nebot E, de la Ossa EM |
| 645 - 648 |
Retention of radium from thermal waters on sand filters and adsorbents
Elejalde C, Herranz M, Idoeta R, Legarda F, Romero F, Baeza A |
| 649 - 654 |
The effect of additives on the treatment of oil-in-water emulsions by vacuum evaporation
Gutierrez G, Cambiella A, Benito JM, Pazos C, Coca J |
| 655 - 662 |
Catalytic and non-catalytic wet air oxidation of sodium dodecylbenzene sulfonate: Kinetics and biodegradability enhancement
Suarez-Ojeda ME, Kim J, Carrera J, Metcalfe IS, Font J |
| 663 - 667 |
Investigation of the catalytic wet peroxide oxidation of phenol over different types of Cu/ZSM-5 catalyst
Valkaj KM, Katovic A, Zrncevic S |
| 668 - 672 |
Granular bed filtration of high temperature biomass gasification gas
Stanghelle D, Slungaard T, Sonju OK |
| 673 - 676 |
Influence of leaks in surface filters on particulate emissions
Bach B, Schmidt E |
| 677 - 681 |
Effect of filtration velocity and dust concentration on cake formation and filter operation in a pilot scale jet pulsed bag filter
Saleem M, Krammer G |
| 682 - 686 |
Dry scrubbing of acid gases in recirculating cyclones
Chibante V, Fonseca A, Salcedo R |
| 687 - 691 |
CFD methods for the reduction of reactive gas emission from a paper laminating machine
Horvath A, Jordan C, Forstner G, Altacher P, Harasek M |
| 692 - 697 |
Different methods in TiO2 photodegradation mechanism studies: Gaseous and TiO2-adsorbed phases
Deveau PA, Arsac F, Thivel PX, Ferronato C, Delpech F, Chovelon JM, Kaluzny P, Monnet C |
| 698 - 702 |
Application of polyimide membranes for biogas purification and enrichment
Harasimowicz M, Orluk P, Zakrzewska-Trznadel G, Chmielewskia AG |
| 703 - 707 |
Enhancing the use of waste activated sludge as bio-fuel through selectively reducing its heavy metal content
Dewil R, Baeyens J, Appels L |
| 708 - 714 |
Product distribution modelling in the thermal pyrolysis of high density polyethylene
Elordi G, Lopez G, Olazar M, Aguado R, Bilbao J |
| 715 - 719 |
Ammonium removal from landfill leachate by anodic oxidation
Cabeza A, Urtiaga A, Rivero MJ, Ortiz I |
| 720 - 724 |
Modeling of zinc solubility in stabilized/solidified electric arc furnace dust
Fernandez-Olmo I, Lasa C, Irabien A |
| 725 - 729 |
Predicting the emissive power of hydrocarbon pool fires
Munoz M, Planas E, Feffero F, Casal J |
| 730 - 735 |
Chemical modification of jute fibers for the production of green-composites
Corrales F, Vilaseca F, Llop M, Girones J, Mendez JA, Mutje P |
| 736 - 741 |
A new measuring method to detect the emissions of metal working fluid mist
Wlaschitz P, Hoflinger W |
| 742 - 746 |
Transmitted-light microscopy - a new method for surface structure analysis of cleanable non-woven dust filter media
Rud H, Mauschitz G, Hoflinger W |
