203 - 206 |
Further investigations on the modified Stober method for spherical MCM-41 Liu SQ, Luc LC, Yang ZX, Cool P, Vansant EF |
207 - 212 |
Room temperature synthesis of mesoporous aggregates of anatase TiO2 nanoparticles Deshpande SB, Potdar HS, Khollam Y, Patil KR, Pasricha R, Jacob NE |
213 - 218 |
Analysis on porous aluminum anodic oxide film formed in Re-OA-H3PO4 solution Wang H, Wang HW |
219 - 225 |
Effect of preheating and annealing temperatures on quality characteristics of ZnO thin film prepared by sol-gel method Wang MR, Wang J, Chen W, Cui Y, Wang LD |
226 - 229 |
Inhibition of corrosion by poly (N-hexadecylaniline)/docosanol mixed Langmuir-Blodgett films on copper in sea water Gupta RK, Singh RA |
230 - 235 |
Effect of gamma-irradiation on oxygen content and kinetic parameters of high T-c Y1Ba2Cu3O7-delta superconductors Kumar A, Kumar P, Tripathy MR, Arora AK, Tandon RP |
236 - 242 |
Improvement of surface acidity and structural regularity of Zr-modified mesoporous MCM-41 Chen LF, Norena LE, Navarrete J, Wang JA |
243 - 246 |
An efficient method to produce single-walled carbon nanotubes by round-trip arc discharge Wang M, Wang XQ, Li ZH, Liu ZY, He P |
247 - 251 |
Hydrothermal synthesis and characterization of ZnGa2O4 phosphors Chen LM, Liu YN, Lu ZG, Huang KL |
252 - 255 |
Structural, magnetic, and electrochemical properties of poly(o-anisidine)/maghemite thin films Fonseca LHM, Rinaldi AW, Rubira AF, Cotica LF, de Medeiros SN, Paesano A, Santos IA, Girotto EM |
256 - 260 |
Dielectric properties of copper oxide doped 0.95Ba(Zn1/3Ta2/3)O-3-0.05BaZrO(3) ceramics at microwave frequency Huang CL, Lin RJ, Tzeng JF |
261 - 266 |
Preparation of nano-Pt-modified electrode and its electrocatalytic activity investigation Chen JM, Ma YT, Zhou XW, Lin Y, Li XP, Xiao XR |
267 - 272 |
Characterisation of carbon fibre composites for decentralised biomedical testing Dutt JSN, Cardosi MF, Wilkins S, Livingstone C, Davis J |
273 - 276 |
X-ray, infrared and magnetic studies of Al-substituted Ni ferrites Bhosalea AG, Chougule BK |
277 - 282 |
Mechanical properties and electrical conductivity of W-B-C composites fabricated by in situ reaction Lv Y, Wen G, Zhang B, Lei TQ |
283 - 287 |
Silver nanoparticle catalysed redox reaction: An electron relay effect Mallick K, Witcomb M, Scurrell M |
288 - 294 |
The processing of CdSe/polymer nanocomposites via solution organometallic chemistry Khanna R, Singh N, Charan S, Lonkar SP, Reddy AS, Patil Y, Viswanath AK |
295 - 300 |
Synthesis of star shaped Ba1-xSrTiO3 (BST) powders Khollam YB, Potdar HS, Deshpande SB, Gaikwad AB |
301 - 307 |
The effect of 1-(2-pyridylazo)-2-naphthol on the corrosion of cold rolled steel in acid media - Part 2: Inhibitive action in 0.5 M sulfuric acid Tang LB, Li XM, Li L, Mu GN, Liu GH |
308 - 314 |
TEM and nanoindentation studies on sputtered Ti40Ni60 thin films Kumar AKN, Nair CKS, Kannan MD, Jayakumar S |
315 - 320 |
Properties of TiN films grown by atomic-layer chemical vapor deposition with a modified gaseous-pulse sequence Cheng HE, Lee WJ |
321 - 329 |
Controlled synthesis of Zn-0 nanoparticles by bioreduction Canizal G, Schabes-Retchkiman PS, Pal U, Liu HB, Ascencio JA |
330 - 336 |
Electrochemical studies on [(1-x)PVA-xPMMA] solid polymer blend electrolytes complexed with LiBF4 Sivakumar M, Subadevi R, Rajendran S, Wu NL, Lee JY |
337 - 342 |
New perovskite oxides of the type (Ln(1/3)Ba(1/3)Ca(1/3))(Zn1/3Ti2/3)O3-delta: Rietveld analysis and dielectric properties Jha P, Ganguli AK |
343 - 350 |
Catalytic behaviors of mixed TiO2-SiO2-supported cobalt Fischer-Tropsch catalysts for carbon monoxide hydrogenation Jongsomjit B, Wongsalee T, Praserthdam P |
351 - 356 |
Synthesis of gold nano-catalysts supported on carbon nanotubes by using electroless plating technique Ma XC, Li X, Lun N, Wen SL |
357 - 364 |
Features of piezoelectric properties of 0-3 PbTiO3-type ceramic/polymer composites Glushanin S, Topolov VY, Krivoruchko AV |
365 - 370 |
Synthesis and characterization of alpha-MnS polyhedrons and spheres Zhang YG, Zhang ZD, Wang ST, Ma XC, Qian YT |
371 - 378 |
Preparation of fine Ni powders from nickel hydrazine complex Park JW, Chae EH, Kim SH, Lee JH, Kim JW, Yoon SM, Choi JY |
379 - 383 |
Influence of electron beam and ultraviolet ozone irradiation on blue-emission properties of C-60-coupled porous silicon Hu DS, Wu XL, Liao MX, Cheng NC, Chu PK |
384 - 389 |
The synthesis of Pt-modified titanium dioxide thin films by microemulsion templating, their characterization and visible-light photocatalytic properties Zhang X, Zhang F, Chan KY |
390 - 393 |
Preparation and photoluminescence of ZnO nanorods Zhong HM, Wang JB, Pan M, Wang SW, Li ZF, Xu WL, Chen XS, Lu W |
394 - 397 |
Synthesis of MgFe2O4 nanocrystallites under mild conditions Huang YJ, Tang Y, Wang J, Chen QW |
398 - 401 |
Preparation of SM3H7 nanoparticles and their application in ammonia synthesis Liu T, Zhang YH, Li XG |
402 - 409 |
Effects of T4 treatment on hot rolling behavior and tensile strength of aluminum matrix composite reinforced by aluminum borate whisker with NiO coating Fei WD, Li ZJ, Li Y |
410 - 414 |
Dielectric behavior of lead zirconate titanate/silver composites Xiang PH, Dong XL, Feng CD, Liang RH, Wang YL |
415 - 419 |
Preparation and desalination performance of multiwall carbon nanotubes Zhang DS, Shi LY, Fang JH, Dai K, Li XK |
420 - 424 |
Compositional dependence of the physical properties of Ge(1)Seg(9-x)Te(x) amorphous system Amin GAM, Maged AF |
425 - 430 |
Impedance analysis of Pb2Sb3LaTi5O18 ceramic Suman CK, Prasad K, Choudhary RNP |
431 - 436 |
Synthesis and photochromism of a novel organic-inorganic hybrid film embedded with polyoxomatalates Huang Y, Pan QY, Dong XW, Cheng ZX |
437 - 441 |
The drug delivery system of MCM-41 materials via co-condensation synthesis Zeng W, Qian XF, Yin J, Zhu ZK |
442 - 447 |
A comparison of the properties of porous silicon formed on polished and textured (100) Si: High resolution XRD and PL studies Bhagavannarayana G, Sharma SN, Sharma RK, Lakshmikumar ST |
448 - 451 |
Solvothermal synthesis and photoluminescence properties of single-crystal Mn2+ doped US nanowires Cheng CW, Xu GY, Zhang HQ, Wang H, Cao JM, Ji HM |
452 - 457 |
Preparation of hard agglomerates free and weakly agglomerated antimony doped tin oxide (ATO) nanoparticles by coprecipitation reaction in methanol reaction medium Kim DW, Kim DS, Kim YG, Kim YC, Oh SG |
458 - 467 |
Crystallization and catalytic activity of high titanium loaded TS-1 zeolite Phonthammachai N, Krissanasaeranee M, Gulari E, Jamieson AM, Wongkasemjit S |
468 - 471 |
The formation of perovskite PbTiO3 powders by sol-gel process Lee CY, Tai NH, Sheu HS, Chiu HT, Hsieh SH |
472 - 475 |
Facile synthesis of carbon monolith with bimodal mesopores Shi ZG, Feng YQ, Xu L, Da SL, Liu Y |
476 - 480 |
On the electronic transport properties of 4,4'-bipyridinium dibromides in thin films Leontie L, Druta I, Rotaru A, Podaru C, Rusu GI |
481 - 487 |
Microwave-hydrothermal synthesis of tetragonal BaTiO3 under various conditions Sun WA, Li CH, Li JQ, Liu W |
488 - 493 |
A single precursor pit for pitting corrosion on defect of tinplate alloy layer visualized by atomic force microscopy Cui GF, Wang JH, Li N, Huang XQ |
494 - 500 |
Preparation of mesoporous nanocrystalline cerium phosphate with controllable pore size by using chelating agent Ho LN, Nishiguchi H, Nagaoka K, Takita Y |
501 - 505 |
Growth and characterization of pure, benzophenone and iodine doped benzoyl glycine single crystals Anand DP, Mohamed MG, Rajasekar SA, Selvakumar S, Pragasam AJA, Sagayaraj P |
506 - 510 |
Preparation of AlN matrix composites using an infiltration and reaction approach Zhao JZ, Gao JQ, Jin ZH |
511 - 516 |
Experimental investigation on carbon nanotube grown by thermal chemical vapor deposition using non-isothermal deposited catalysts Chen TT, Liu YM, Sung Y, Wang HT, Ger MD |
517 - 524 |
Vibration damping properties of gradient polyurethane/vinyl ester resin interpenetrating polymer network Qin CL, Zhao DY, Bai XD, Zhang XG, Zhang B, Jin Z, Niu HJ |