1 - 24 |
Achieving high performance and low emission in a dual fuel operated engine with varied injection parameters and combustion chamber shapes Nayak SK, Mishra PC |
25 - 35 |
An integrated approach for efficient conversion of Lemna minor to biogas Kaur M, Srikanth S, Kumar M, Sachdeva S, Puri SK |
36 - 43 |
Bridging the relationship between hydrothermal pretreatment and co-pyrolysis: Effect of hydrothermal pretreatment on aromatic production Dai LL, Wang YP, Liu YH, Ruan R, He C, Duan DL, Zhao YF, Yu ZT, Jiang L, Wu QH |
44 - 59 |
Multiple parametric analysis, optimization and efficiency prediction of transcritical organic Rankine cycle using trans-1,3,3,3-tetrafluoropropene (R1234ze(E)) for low grade waste heat recovery Zhi LH, Hu P, Chen LX, Zhao G |
60 - 71 |
Catalytic fast co-pyrolysis of bamboo sawdust and waste tire using a tandem reactor with cascade bubbling fluidized bed and fixed bed system Wang J, Zhong ZP, Ding K, Li M, Hao NJ, Meng XZ, Ruan R, Ragauskas AJ |
72 - 82 |
Effect of employing a new biological nanofluid containing functionalized graphene nanoplatelets on thermal and hydraulic characteristics of a spiral heat exchanger Bahiraei M, Salmi HK, Safaei MR |
83 - 93 |
Optimization analysis of a hybrid fresh air handling system based on evaporative cooling and condensation dehumidification Zhang L, Zha XB, Song X, Zhang XS |
94 - 105 |
A solution to the cooling and preheating of hydraulic system by organic Rankine cycle with heat pump Gu ZZ, Zhang XG, Dong ZX, Quan L |
106 - 118 |
A gas-atomized spray cooling system integrated with an ejector loop: Ejector modeling and thermal performance analysis Wang JX, Li YZ, Li JX, Li C, Zhang Y, Ning XW |
119 - 133 |
Cascade hydropower plants operation considering comprehensive ecological water demands Zhang HX, Chang JX, Gao C, Wu HS, Wang YM, Lei KX, Long RH, Zhang LP |
134 - 148 |
Activated carbon and graphene nanoplatelets based novel composite for performance enhancement of adsorption cooling cycle Pal A, Uddin K, Thu K, Saha BB |
149 - 161 |
Catalyst layer design and arrangement to improve the performance of a microchannel methanol steam reformer Herdem MS, Mundhwa M, Farhad S, Hamdullahpur F |
162 - 170 |
A novel framework for Lithium-ion battery modeling considering uncertainties of temperature and aging Tang XP, Wang YJ, Zou CF, Yao K, Xia YX, Gao FR |
171 - 182 |
Investigation of a nanofluid-based concentrating thermal photovoltaic with a parabolic reflector Bellos E, Tzivanidis C |
183 - 195 |
Energy, exergy, environmental, and economic modeling of combined cooling, heating and power system with Stirling engine and absorption chiller Sheykhi M, Chahartaghi M, Balakheli MM, Kharkeshi BA, Miri SM |
196 - 205 |
Wind speed prediction model using singular spectrum analysis, empirical mode decomposition and convolutional support vector machine Mi XW, Liu H, Li YF |
206 - 217 |
A new AMTEC/TAR hybrid system for power and cooling cogeneration Wu SY, Guo G, Xiao L, Chen ZL |
218 - 230 |
A thermodynamic analysis and economic evaluation of an integrated cold-end energy utilization system in a de-carbonization coal-fired power plant Xu C, Gao YC, Xu G, Li XS, Zhao SF, Yang YP |
231 - 239 |
3D model of thermoelectric generator (TEG) case study: Effect of flow regime on the TEG performance Eldesoukey A, Hassan H |
240 - 249 |
Production capacity analysis and energy optimization of complex petrochemical industries using novel extreme learning machine integrating affinity propagation Han YM, Wu H, Jia MH, Geng ZQ, Zhong YH |
250 - 257 |
Integrated techno-economic analysis under uncertainty of glycerol steam reforming for H-2 production at distributed H-2 refueling stations Lee B, Heo J, Kim S, Kim CH, Ryi SK, Lim H |
258 - 268 |
Dynamic vulnerability in standalone hybrid renewable energy system Kosai S |
269 - 280 |
Thermo-environ-economic evaluation of a trigeneration system based on thermoelectric generator, two-bed adsorption chiller, and polymer exchange membrane fuel cell Ebrahimi M, Derakhshan E |
281 - 291 |
Data-driven techniques for fault diagnosis in power generation plants based on solid oxide fuel cells Costamagna P, De Giorgi A, Moser G, Serpico SB, Trucco A |
292 - 301 |
Experimental thermodynamic first and second law analysis of a variable output 1-4.5 kWe, ICE-driven, natural-gas fueled micro-CHP generator Taie Z, Hagen C |
302 - 311 |
Advanced wind power prediction based on data-driven error correction Yan J, Ouyang TH |
312 - 324 |
Quantifying the influence of wind power and photovoltaic on future electricity market prices Sorknaes P, Djorup SR, Lund H, Thellufsen JZ |
325 - 337 |
Thermodynamic analysis of the novel chemical looping process for two-grade hydrogen production with CO2 capture Saithong N, Authayanun S, Patcharavorachot Y, Arpornwichanop A |
338 - 357 |
A novel wind speed forecasting based on hybrid decomposition and online sequential outlier robust extreme learning machine Zhang D, Peng XG, Pan KD, Liu Y |
358 - 371 |
The photovoltaic-thermal system parameter optimization design and practical verification Kuo CFJ, Liu JM, Umar ML, Lan WL, Huang CY, Syu SS |
372 - 390 |
A synergistic evaluation on application of solar-thermal energy in water purification: Current scenario and future prospects Verma SK, Singhal P, Chauhan DS |
391 - 400 |
Power dispatch assessment of a wind farm and a hydropower plant: A case study in Argentina Levieux LI, Inthamoussou FA, De Battista H |
401 - 410 |
Catalytic performance of strontium oxide supported by MIL-100(Fe) derivate as transesterification catalyst for biodiesel production Li H, Liu FS, Ma XL, Wu ZJ, Li Y, Zhang LH, Zhou SJ, Helian YX |
411 - 424 |
Optimization and application of Stirling engine for waste heat recovery from a heavy-duty truck engine Guven M, Bedir H, Anlas G |
425 - 441 |
Multi-objective optimization of double effect series and parallel flow water-lithium chloride and water-lithium bromide absorption refrigeration systems Konwar D, Gogoi TK, Das AJ |
442 - 472 |
Integrated assessment of a sustainable microgrid for a remote village in hilly region Kumar A, Singh AR, Deng Y, He XN, Kumar P, Bansal RC |
473 - 495 |
Multi-objective optimization and comparison framework for the design of Distributed Energy Systems Karmellos M, Mavrotas G |
496 - 510 |
Appending empirical modelling to numerical solution for behaviour characterisation of microalgae biodiesel Salam S, Verma TN |
511 - 523 |
Optimization of synthesis condition for CO2 hydrogenation to light olefins over In2O3 admixed with SAPO-34 Numpilai T, Wattanakit C, Chareonpanich M, Limtrakul J, Witoon T |
524 - 532 |
Performance analysis and optimization of a NGCC-CHP plant with low pressure economizer partial recirculation system Yu HQ, Zhou JX, Ma H, Shao Z, Si FQ |
533 - 549 |
Three-dimensional computational fluid dynamics simulation of stirling engine El-Ghafour SA, El-Ghandour M, Mikhael NN |
550 - 558 |
Design of fins with a grooved heat pipe for dissipation of heat from high-powered automotive LED headlights Huang DS, Chen TC, Tsai LT, Lin MT |
559 - 583 |
A review of unconventional bottoming cycles for waste heat recovery: Part II - Applications Omar A, Saghafifar M, Mohammadi K, Alashkar A, Gadalla M |
584 - 597 |
An approximate and efficient characterization method for temperature-dependent parameters of thermoelectric modules He HL, Liu WW, Wu Y, Rong MZ, Zhao P, Tang XJ |
598 - 608 |
Optimal design and size of a desiccant cooling system with onsite energy generation and thermal storage using a multilayer perceptron neural network and a genetic algorithm Ren HS, Ma ZJ, Lin WY, Wang SG, Li WH |
609 - 621 |
Sizing a stand-alone solar-wind-hydrogen energy system using weather forecasting and a hybrid search optimization algorithm Zhang WP, Maleki A, Rosen MA, Liu JQ |
622 - 640 |
Exergetic and exergoeconomic evaluation of co-firing biomass gas with natural gas in CCHP system integrated with ground source heat pump Zhang XF, Zeng R, Mu K, Liu XB, Sun XQ, Li HQ |
641 - 653 |
Numerical investigation of a humidification-dehumidification desalination system driven by heat pump Zhang Y, Zhang H, Zheng WD, You SJ, Wang YR |
654 - 664 |
Continuous power output criteria and optimum operation strategies of an upgraded thermally regenerative electrochemical cycles system Guo JC, Wang Y, Gonzalez-Ayala J, Roco JMM, Medina A, Hernandez AC |
665 - 679 |
Analysis and comparison on thermodynamic and economic performances of an organic Rankine cycle with constant and one-dimensional dynamic turbine efficiency Li P, Han ZH, Jia XQ, Mei ZK, Han X, Wang Z |
680 - 688 |
Ultrasonic enhanced simultaneous algal lipid production and nutrients removal from non-sterile domestic wastewater Ren HY, Zhu JN, Kong FY, Xing DF, Zhao L, Ma J, Ren NQ, Liu BF |
689 - 708 |
Optimization of a triple cycle based on a solid oxide fuel cell and gas and steam cycles with a multiobjective genetic algorithm and energy, exergy and economic analyses Ehyaei MA, Rosen MA |
709 - 723 |
Hybrid system combining mechanical compression and thermochemical storage of ammonia vapor for cold production Fito J, Coronas A, Mauran S, Mazet N, Perier-Muzet M, Stitou D |
724 - 732 |
An improved calorimetric method for characterizations of the specific heat and the heat generation rate in a prismatic lithium ion battery cell Sheng L, Su L, Zhang HY, Fang YD, Xu HF, Ye W |
733 - 746 |
A modified novel blade configuration proposal for a more efficient VAWT using CFD tools Ostos I, Ruiz I, Gajic M, Gomez W, Bonilla A, Collazos C |
747 - 756 |
Bioinspired sweating with temperature sensitive hydrogel to passively dissipate heat from high-end wearable electronics Pu SR, Su JX, Li LX, Wang HS, Chen CY, Hu XJ |
757 - 768 |
Hybridisation of biomass and concentrated solar power systems in transcritical organic Rankine cycles: A micro combined heat and power application Morrone P, Algieri A, Castiglione T |
769 - 783 |
A novel ultra-thin flattened heat pipe with biporous spiral woven mesh wick for cooling electronic devices Zhou WJ, Li Y, Chen ZS, Deng LQ, Gan YH |
784 - 795 |
Enhancement of nanoparticle-phase change material melting performance using a sinusoidal heat pipe Ren QL |
796 - 810 |
Thermodynamic investigation and experimental analysis on phenol steam reforming towards enhanced H-2 production over structured Ni/ZnTiO3 nanocatalyst Baamran KS, Tahir M |
811 - 821 |
Design, modeling and experimental verification of circular Halbach electromagnetic energy harvesting from bearing motion Zhang Y, Cao JY, Zhu HY, Lei YG |
822 - 830 |
NiCo@NiCo phyllosilicate@CeO2 hollow core shell catalysts for steam reforming of toluene as biomass tar model compound Li ZW, Li M, Ashok J, Sibudjing K |
831 - 843 |
A simplified mathematical model for power output predicting of Building Integrated Photovoltaic under partial shading conditions Zhu L, Li QX, Chen MD, Cao KY, Sun Y |
844 - 858 |
Inverse design of wind turbine blade sections for operation under icing conditions Kollar LE, Mishra R |
859 - 888 |
A novel multigeneration system driven by a hybrid biogas-geothermal heat source, Part II: Multi-criteria optimization Rostamzadeh H, Gargari SG, Namin AS, Ghaebi H |
889 - 903 |
Exergoeconomic design criterion of solar absorption-subcooled compression hybrid cooling system based on the variable working conditions Jing Y, Li ZY, Chen HK, Lu SZ, Lv SL |
904 - 923 |
A comparative analysis of engine characteristics from various biodiesels: Numerical study Rajak U, Verma TN |
924 - 930 |
Prediction of sorption-enhanced reforming process on hydrotalcite sorbent in a fluidized bed reactor Wang S, Xu SD, Liu SY, Hu B |
931 - 937 |
Co-digestion of municipal waste biopulp with marine macroalgae focusing on sodium inhibition Tsapekos P, Alvarado-Morales M, Kougias PG, Konstantopoulos K, Angelidaki I |
938 - 948 |
Technical and economic feasibility analysis of an anaerobic digestion plant fed with canteen food waste Zeng HR, Yan YJ, Liberti F, Pietro B, Fantozzi F |
949 - 961 |
Simultaneous energy storage and recovery in the triplex-tube heat exchanger with PCM, copper fins and Al2O3 nanoparticles Mahdi JM, Lohrasbi S, Ganji DD, Nsofor EC |
962 - 976 |
Performance analysis and optimization of a combined cooling and power system using low boiling point working fluid driven by engine waste heat Huang WG, Wang JF, Xia JX, Zhao P, Dai YP |
977 - 989 |
Modelling thermal performance degradation of high and low-temperature solid thermal energy storage due to cracking processes using a phase-field approach Miao XY, Kolditz O, Nagel T |
990 - 1000 |
Numerical simulation of the performance of a diesel cycle operating with diesel-biodiesel mixtures Novaes TLCC, Henriquez JR, Ochoa AAV |
1001 - 1012 |
Cooling performance study of a novel heat exchanger in an absorption system Mirmohammadi SA, Behi M, Ghanbarpour M |
1013 - 1025 |
Development of high microwave-absorptive bifunctional graphene oxide-based catalyst for biodiesel production Loy ACM, Quitain AT, Lam MK, Yusup S, Sasaki M, Kida T |
1026 - 1038 |
An investigation on CRDi engine characteristic using renewable orange-peel oil Ashok B, Nanthagopal K, Perumal DA, Babu JM, Tiwari A, Sharma A |
1039 - 1054 |
Performance comparison of a heating tower heat pump and an air-source heat pump: A comprehensive modeling and simulation study Huang SF, Zuo WD, Lu HX, Liang CH, Zhang XS |
1055 - 1067 |
Application of carbon dioxide as working fluid in geothermal development considering a complex fractured system Chen Y, Ma GW, Wang HD, Li T, Wang Y |
1068 - 1084 |
Performance study of solar photovoltaic-thermal collector for domestic hot water use and thermochemical sorption seasonal storage Thinsurat K, Bao HS, Ma ZW, Roskilly AP |
1085 - 1108 |
Assessment of the offshore wind turbine support structure integrity and management of multivariate hybrid probability frameworks Zhang SY, Yan YF, Wang P, Xu ZQ, Yan XZ |
1109 - 1128 |
Direct quantification of multiple-source energy flexibility in a residential building using a new model predictive high-level controller Ruusu R, Cao SL, Delgado BM, Hasan A |
1129 - 1138 |
Waste heat recovery and water-saving modification for a water-cooled gas-steam combined cycle cogeneration system with absorption heat pump Zhang HS, Zhao HB, Li ZL |
1139 - 1152 |
An innovative integrated system concept between oxy-fuel thermo-photovoltaic device and a Brayton-Rankine combined cycle and its preliminary thermodynamic analysis Shan SQ, Zhou ZJ, Cen KF |
1153 - 1166 |
Robust and flexible strategy for fault detection in grid-connected photovoltaic systems Harrou F, Taghezouit B, Sun Y |
1167 - 1184 |
Integral energy valorization of municipal solid waste reject fraction to biofuels Ortiz FJG, Kruse A, Ramos F, Ollero P |
1185 - 1195 |
Optimization of fins fitted phase change material equipped solar photovoltaic under various working circumstances Khanna S, Newar S, Sharma V, Reddy KS, Mallick TK |
1196 - 1202 |
Preparation of a novel composite phase change material (PCM) and its locally enhanced heat transfer for power battery module Zou DQ, Liu XS, He RJ, Zhu SX, Bao JM, Guo JR, Hu ZG, Wang BH |
1203 - 1216 |
Non-neutral catalyst and reaction energy recovery to minimize the energy consumption for hydrogen production by recyclably indirect H2O electrolysis and CO2 capture Yu YS, Zhang C, Zhang ZX, Wang GGX |
1217 - 1224 |
A comprehensive analysis of secondary flow effects on the performance of PEMFCs with modified serpentine flow fields Min CH, He J, Wang K, Xie LY, Yang XG |
1225 - 1246 |
Exergy analysis of single to triple effect lithium bromide-water vapour absorption cycles and optimization of the operating parameters Azhar M, Siddiqui MA |
1247 - 1259 |
Solar Thermal Electrochemical Process (STEP) action to biomass: Solar thermo-coupled electrochemical synergy for efficient breaking of biomass to biofuels and hydrogen Yan C, Wang JQ, Du HF, Zhu LY, Jiang TT, Jiang H, Wu HJ, Wang BH |
1260 - 1267 |
Pyrolysis characteristics and kinetic studies of horse manure using thermogravimetric analysis Chong CT, Mong GR, Ng JH, Chong WWF, Ani FN, Lam SS, Ong HC |
1268 - 1280 |
Thermodynamic analysis of a novel hybrid thermochemical-compressed air energy storage system powered by wind, solar and/or off-peak electricity Wu SK, Zhou C, Doroodchi E, Moghtaderi B |