| 1 - 1 |
Special Issue of The Second International Symposium on Gasification and its Application Preface
Hayashi J, Xu GW, Li CZ |
| 2 - 6 |
Plasma-assisted oxidation of carbon particle by lattice oxygen on/in oxide catalyst
Sekine Y, Koyama H, Matsukata M, Kikuchi E |
| 7 - 13 |
Mechanisms and kinetic modelling of steam gasification of brown coal in the presence of volatile-char interactions
Kajitani S, Tay HL, Zhang S, Li CZ |
| 14 - 21 |
Modeling of coal char gasification in coexistence of CO2 and H2O considering sharing of active sites
Umemoto S, Kajitani S, Hara S |
| 22 - 28 |
Effects of gasifying agent on the evolution of char structure during the gasification of Victorian brown coal
Tay HL, Kajitani S, Zhang S, Li CZ |
| 29 - 36 |
Isothermal differential characteristics of gas-solid reaction in micro-fluidized bed reactor
Yu J, Zeng X, Zhang JW, Zhong M, Zhang GY, Wang Y, Xu GW |
| 37 - 41 |
Gravity separation and its effect on CO2 gasification
Nonaka M, Hirajima T, Sasaki K |
| 42 - 52 |
Optimization of char and tar conversion in fluidized bed biomass gasifiers
Gomez-Barea A, Ollero P, Leckner B |
| 53 - 57 |
Experimental research on fuel staging cyclone gasification of wood powder
Zhao YJ, Sun SZ, Zhang TP, Zhou H |
| 58 - 63 |
Simulation of municipal solid waste gasification in two different types of fixed bed reactors
Chen C, Jin YQ, Yan JH, Chi Y |
| 64 - 72 |
Coproduction of clean syngas and iron from woody biomass and natural goethite ore
Kudo S, Sugiyama K, Norinaga K, Li CZ, Akiyama T, Hayashi J |
| 73 - 79 |
Simultaneous removal of hydrogen sulfide and mercury from simulated syngas by iron-based sorbents
Wang JC, Zhang YP, Han LN, Chang LP, Bao WR |
| 80 - 86 |
Effect of monolithic structure on CO2 adsorption performance of activated carbon fiber-phenolic resin composite: A simulation study
An H, Feng B, Su S |
| 87 - 93 |
The sintering behavior of coal ash under pressurized conditions
Jing NJ, Wang QH, Cheng LM, Luo ZY, Cen KF |
| 94 - 100 |
Effect of coexisting inorganic chlorides on lead volatilization from CaO-SiO2-Al2O3 molten slag under municipal solid waste gasification and melting conditions
Kageyama H, Osada S, Nakata H, Kubota M, Matsuda H |
| 101 - 110 |
A microscopic study of the precipitation of metallic iron in slag from iron-rich coal during high temperature gasification
Wei YJ, Li HX, Yamada N, Sato A, Ninomiya Y, Honma K, Tanosaki T |
| 111 - 121 |
Steam reforming of naphthalene/benzene with various types of Pt- and Ni-based catalysts for hydrogen production
Furusawa T, Saito K, Kori Y, Miura Y, Sato M, Suzuki N |
| 122 - 129 |
Catalytic performance of manganese-promoted nickel catalysts for the steam reforming of tar from biomass pyrolysis to synthesis gas
Koike M, Ishikawa C, Li DL, Wang L, Nakagawa Y, Tomishige K |
| 130 - 134 |
Production of ketones from pyroligneous acid of woody biomass pyrolysis over an iron-oxide catalyst
Mansur D, Yoshikawa T, Norinaga K, Hayashi J, Tago T, Masuda T |
| 135 - 140 |
Synthesis gas production from catalytic gasification of waste biomass using nickel-loaded brown coal char
Xiao XB, Cao JP, Meng XL, Le DD, Li LY, Ogawa Y, Sato K, Takarada T |
| 141 - 150 |
Detailed chemical kinetic modelling of vapour-phase cracking of multi-component molecular mixtures derived from the fast pyrolysis of cellulose
Norinaga K, Shoji T, Kudo S, Hayashi J |
| 151 - 155 |
Influence of production conditions on the yield and environmental stability of biochar
Masek O, Brownsort P, Cross A, Sohi S |
| 156 - 160 |
Torrefaction of oil palm EFB in the presence of oxygen
Uemura Y, Omar W, Othman NA, Yusup S, Tsutsui T |
| 161 - 170 |
Catalytic gasification of a Powder River Basin coal
Popa T, Fan MH, Argyle MD, Slimane RB, Bell DA, Towler BF |
| 171 - 178 |
Moisture sorption characteristics of switchgrass and prairie cord grass
Karunanithy C, Muthukumarappan K, Donepudi A |
| 179 - 192 |
Electricity production by biomass steam gasification using a high efficiency technology and low environmental impact
Molino A, Giordano G, Motola V, Fiorenza G, Nanna F, Braccio G |
| 193 - 199 |
Hydrogen production by supercritical water gasification of glucose with Ni/CeO2/Al2O3: Effect of Ce loading
Lu YJ, Li S, Guo LJ |
| 200 - 211 |
Combustion characteristics and emissions of 2-methylfuran compared to 2,5-dimethylfuran, gasoline and ethanol in a DISI engine
Wang CM, Xu HM, Daniel R, Ghafourian A, Herreros JM, Shuai SJ, Ma X |
| 212 - 219 |
Thermal and heat transfer behaviors of an inverse diffusion flame with induced swirl
Zhen HS, Cheung CS, Leung CW, Li HB |
| 220 - 226 |
Does Illinois bituminous coal manifest glass transition: DMA, DSC, and FTIR results
Markevicius G, West RD, Malhotra VM, Hofer S |
| 227 - 231 |
Common rail diesel tractor engine performance running on pure plant oil
Golimowski W, Pasyniuk P, Berger WA |
| 232 - 238 |
Density of alkyl esters and its mixtures: A comparison and improvement of predictive models
Garcia M, Alba JJ, Gonzalo A, Sanchez JL, Arauzo J |
| 239 - 246 |
The influence of changes in fuel calorific value to combustion performance for Siemens SGT-300 dry low emission combustion system
Liu KX, Sanderson V |
| 247 - 257 |
Characterisation of waste derived intermediate pyrolysis oils for use as diesel engine fuels
Yang Y, Brammer JG, Ouadi M, Samanya J, Hornung A, Xu HM, Li Y |
| 258 - 268 |
Pore structure and its impact on CH4 adsorption capacity and flow capability of bituminous and subbituminous coals from Northeast China
Cai YD, Liu DM, Pan ZJ, Yao YB, Li JQ, Qiu YK |
| 269 - 277 |
Multi-objective optimization of a bio-diesel production process
Sharma S, Rangaiah GP |
| 278 - 284 |
An experimental investigation of stability and operation of a biogas fueled porous burner
Keramiotis C, Founti MA |
| 285 - 291 |
Kinetic mechanism research of an industrial hydrocracker based on strict calculation of stoichiometric coefficients
Li GQ, Xia Y, Zeng WQ |
| 292 - 298 |
Combustion characterization in a single cylinder engine with mid-levels hydrated ethanol-gasoline blended fuels
Schifter I, Diaz L, Gomez P, Gonzalez U |
| 299 - 307 |
The origin of trimethyldibenzothiophenes and their application as maturity indicators in sediments from the Liaohe Basin, East China
Li MJ, Zhong NN, Shi SB, Zhu L, Tang YJ |
| 308 - 320 |
Study of factors affecting syngas quality and their interactions in fluidized bed gasification of lignite coal
Karimipour S, Gerspacher R, Gupta R, Spiteri RJ |
| 321 - 333 |
Removal of refractory S-containing compounds from liquid fuels over P-loaded NiMoW/SBA-16 sulfide catalysts
Guzman MA, Huirache-Acuna R, Loricera CV, Hernandez JR, de Leon JND, Reyes JADL, Pawelec B |
| 334 - 346 |
Variation of hydrocarbon compositions and ignition locations on the radiative flame initiation characteristics through multi-dimensional DFCD incorporated image analysis
Huang HW, Yang JS, Wang Q, Zhang Y |
| 347 - 355 |
Determination of effective thermal conductivity and specific heat capacity of wood pellets
Guo WD, Lim CJ, Bi XT, Sokhansanj S, Melin S |
| 356 - 363 |
Demulsifying super-heavy crude oil with bifunctionalized block copolymers
Cendejas G, Arreguin F, Castro LV, Flores EA, Vazquez F |
| 364 - 372 |
Nonlinear response of buoyant diffusion flame under acoustic excitation
Wang Q, Huang HW, Tang HJ, Zhu M, Zhang Y |
| 373 - 379 |
Fuel octane effects on gasoline multiple premixed compression ignition (MPCI) mode
Yang HQ, Shuai SJ, Wang Z, Wang JX |
| 380 - 386 |
Diesel exhaust emissions and particle hygroscopicity with HVO fuel-oxygenate blend
Happonen M, Heikkila J, Aakko-Saksa P, Murtonen T, Lehto K, Rostedt A, Sarjovaara T, Larmi M, Keskinen J, Virtanen A |
| 387 - 392 |
Comparison of efficiency of two methods for tar sampling in the syngas
Osipovs S |
| 393 - 397 |
Lanthanum-chromium-nickel perovskites for the catalytic cracking of tar model compounds
Grieco EM, Gervasio C, Baldi G |
| 398 - 407 |
Biodiesel production from hempseed oil using alkaline earth metal oxides supporting copper oxide as bi-functional catalysts for transesterification and selective hydrogenation
Su MX, Yang R, Li M |
| 408 - 413 |
Aromatization of n-octane over Pd/C catalysts
Yin MC, Natelson RH, Campos AA, Kolar P, Roberts WL |
| 414 - 420 |
Exhaust emissions and mutagenic effects of diesel fuel, biodiesel and biodiesel blends
Schroder O, Bunger J, Munack A, Knothe G, Krahl J |
| 421 - 429 |
Oxy-fuel technology: An experimental investigations into oil shale combustion under oxy-fuel conditions
Al-Makhadmeh L, Maier J, Al-Harahsheh M, Scheffknecht G |
| 430 - 436 |
Toxic elements mobility in coal and ashes of Figueira coal power plant, Brazil
Flues M, Sato IM, Scapin MA, Cotrim MEB, Camargo IMC |
| 437 - 443 |
Production of the liquid fuel by thermal pyrolysis of neem seed
Nayan NK, Kumar S, Singh RK |
| 444 - 453 |
Effect of syngas composition on hydrogen permeation through a Pd-Ag membrane
Pinto F, Andre RN, Franco C, Carolino C, Gulyurtlu I |
| 454 - 466 |
An automated ash fusion test for characterisation of the behaviour of ashes from biomass and coal at elevated temperatures
Pang CH, Hewakandamby B, Wu T, Lester E |
| 467 - 472 |
Experimental and modeling study on the influences of methanol on premixed fuel-rich n-heptane flames
Chen G, Yu W, Jiang X, Huang ZH, Wang ZD, Cheng ZJ |
| 473 - 479 |
Study on first-cycle combustion and emissions during cold start in a TSDI gasoline engine
Fan Q, Li L |
| 480 - 485 |
Chitosan modified zeolite as a versatile adsorbent for the removal of different pollutants from water
Xie J, Li CJ, Chi LA, Wu DY |
| 486 - 494 |
Effect of liquid viscosity on atomization in an internal-mixing twin-fluid atomizer
Li ZH, Wu YX, Yang HR, Cai CR, Zhang H, Hashiguchi K, Takeno K, Lu JF |
| 495 - 505 |
Continuous high purity hydrogen generation from a syngas chemical looping 25 kW(th) sub-pilot unit with 100% carbon capture
Tong A, Sridhar D, Sun ZC, Kim HR, Zeng L, Wang F, Wang DW, Kathe MV, Luo SW, Sun YH, Fan LS |
| 506 - 511 |
The use of thermal lens spectroscopy to assess oil-biodiesel blends
Ventura M, Simionatto E, Andrade LHC, Simionatto EL, Riva D, Lima SM |
| 512 - 523 |
Effect of sulfuric acid addition on the yield and composition of lignin derived oligomers obtained by the auger and fast pyrolysis of Douglas-fir wood
Zhou S, Osman NB, Li H, McDonald AG, Mourant D, Li CZ, Garcia-Perez M |
| 524 - 532 |
Time dependent production of NO from combustion of large biomass char particles
Karlstrom O, Brink A, Hupa M |
| 533 - 541 |
Zeolites formation by hydrothermal alkali activation of coal fly ash from thermal power station "Maritsa 3'', Bulgaria
Shoumkova A, Stoyanova V |
| 542 - 552 |
Pyrolysis of rubber tyre wastes: A kinetic study
Miranda M, Pinto F, Gulyurtlu I, Cabrita I |
| 553 - 561 |
Hydrocracking of petroleum vacuum residue with activated carbon and metal additives in a supercritical m-xylene solvent
Viet TT, Lee JH, Ma F, Kim GR, Ahn IS, Lee CH |
| 562 - 569 |
Destruction of alkali chlorides using sulphur and ferric sulphate during grate combustion of corn stover and wood chip blends
Aho M, Paakkinen K, Taipale R |
| 570 - 578 |
Mercury removal by bio-char based modified activated carbons
De M, Azargohar R, Dalai AK, Shewchuk SR |
| 579 - 584 |
Temperature effect on co-hydroprocessing of heavy gas oil-waste cooking oil mixtures for hybrid diesel production
Bezergianni S, Dimitriadis A |
| 585 - 592 |
Studying various optimal control problems in biodiesel production in a batch reactor under uncertainty
Benavides PT, Diwekar U |
| 593 - 599 |
Potential renewable oxygenated biofuels for the aviation and road transport sectors
Jenkins RW, Munro M, Nash S, Chuck CJ |
| 600 - 605 |
Effect of polar/nonpolar groups in comb-type copolymers on cold flowability and paraffin crystallization of waxy oils
Xu J, Xing SL, Qian HQ, Chen S, Wei XM, Zhang R, Li L, Guo XH |
| 606 - 616 |
Pore structure characterization of North American shale gas reservoirs using USANS/SANS, gas adsorption, and mercury intrusion
Clarkson CR, Solano N, Bustin RM, Bustin AMM, Chalmers GRL, He L, Melnichenko YB, Radlinski AP, Blach TP |
| 617 - 625 |
Catalytic characteristics and parameters optimization of the glycerol acetylation over solid acid catalysts
Zhou LM, Al-Zaini E, Adesina AA |
| 626 - 631 |
Microwave-assisted preparation of a new esterification catalyst from wasted flint kaolin
de Oliveira AD, Costa LRD, Pires LHD, do Nascimento LAS, Angelica RS, da Costa CEF, Zamian JR, da Rocha GN |
| 632 - 638 |
Support influence on the basicity promotion of lithium-based mixed oxides for transesterification reaction
Castro CS, Ferreti C, Di Cosimo JI, Assaf JM |
| 639 - 645 |
The biosolubilization of lignite by Bacillus sp Y7 and characterization of the soluble products
Jiang F, Li ZH, Lv ZW, Gao TG, Yang JS, Qin ZH, Yuan HL |
| 646 - 662 |
Numerical investigation of the effects of fuel variability on the dynamics of syngas impinging jet flames
Martinez DM, Jiang X, Moulinec C, Emerson DR |
| 663 - 671 |
Gasification kinetics during entrained flow gasification - Part I; Devolatilisation and char deactivation
Tremel A, Spliethoff H |
| 672 - 682 |
Effect of pretreatment temperature on the yield and properties of bio-oils obtained from the auger pyrolysis of Douglas fir wood
Liaw SS, Zhou S, Wu HW, Garcia-Perez M |
| 683 - 692 |
Experimental study on bio-oil upgrading over Pt/SO42-/ZrO2/SBA-15 catalyst in supercritical ethanol
Dang Q, Luo ZY, Zhang JX, Wang J, Chen W, Yang Y |
| 693 - 698 |
Optimization and kinetic studies on biodiesel production from underutilized Ceiba Pentandra oil
Sivakumar P, Sindhanaiselvan S, Gandhi NN, Devi SS, Renganathan S |
| 699 - 704 |
Preparation of the highly loaded and well-dispersed NiO/SBA-15 for methanation of producer gas
Lu BW, Kawamoto K |
| 705 - 710 |
Spatial structure and NO formation of a laminar methane-nitrogen jet in hot coflow under MILD conditions: A spontaneous Raman and LIF study
Sepman AV, Mokhov AV, Levinsky HB |
| 711 - 718 |
Influence of thermoplastic properties on coking pressure generation: Part 3 - Evidence and role of pore coalescence in the mechanism for pressure generation
Duffy JJ, Scholes O, Mahoney MR, Steel KM |
| 719 - 724 |
Biodiesel production using cesium modified mesoporous ordered silica as heterogeneous base catalyst
Kazemian H, Turowec B, Siddiquee MN, Rohani S |
| 725 - 729 |
Simultaneous determination of ethanol and methanol in fuel ethanol using cyclic voltammetry
Pereira PF, Sousa RMF, Munoz RAA, Richter EM |
| 730 - 735 |
Combustion and emissions of 2,5-dimethylfuran addition on a diesel engine with low temperature combustion
Zhang QC, Chen GS, Zheng ZQ, Liu HF, Xu J, Yao MF |
| 736 - 741 |
Characterization of a certified reference material (NMIJ CRM 8301-a) for determination of Cu in bio-ethanol
Zhu YB, Narukawa T, Numata M, Kitamaki Y, Matsuo M, Hioki A, Kato K, Chiba K |
| 742 - 748 |
A new co-solvent method for the green production of biodiesel fuel -Optimization and practical application
Thanh LT, Okitsu K, Sadanaga Y, Takenaka N, Maeda Y, Bandow H |
| 749 - 757 |
A novel technique for measuring the kinetics of high-temperature gasification of biomass char with steam
Woodruff RB, Weimer AW |
| 758 - 763 |
Liquefaction of giant reed (Arundo donax L.) by supercritical fluid extraction
Aysu T, Kucuk MM |
| 764 - 772 |
Dynamic Elemental Thermal Analysis: A technique for continuous measurement of carbon, hydrogen, oxygen chemistry of tar species evolved during coal pyrolysis
Stanger R, Xie W, Wall T, Lucas J, Mahoney M |
| 773 - 782 |
Multi-scale modeling of fixed-bed thermo-chemical processes of biomass with the representative particle model: Application to pyrolysis
Anca-Couce A, Zobel N, Jakobsen HA |
| 783 - 791 |
Experimental observations of complex flame propagations initiated at different locations of an impingement configuration
McDaid C, Zhou J, Zhang Y |
| 792 - 798 |
Control of NOx emissions of a domestic/small-scale biomass pellet boiler by air staging
Liu H, Chaney J, Li JX, Sun CG |
| 799 - 804 |
An optimized highly active and thermo-stable oxidation catalyst Pd/Ce-Zr-Y/Al2O3 calcined at superhigh temperature and used for C3H8 total oxidation
Wang G, You R, Meng M |
| 805 - 813 |
Performance, cost and emissions of coal-to-liquids (CTLs) plants using low-quality coals under carbon constraints
Mantripragada HC, Rubin ES |
| 814 - 826 |
Torrefaction of ionic-liquid impregnated lignocellulosic biomass and its comparison to dry torrefaction
Sarvaramini A, Gravel O, Larachi F |
| 827 - 834 |
Synthesis of zeolites X and A from fly ashes for cadmium and zinc removal from aqueous solutions in single and binary ion systems
Izidoro JD, Fungaro DA, Abbott JE, Wang SB |
| 835 - 842 |
The combustion of droplets of high-asphaltene heavy oils
Bartle KD, Jones JM, Lea-Langton AR, Pourkashanian M, Ross AB, Thillaimuthu JS, Waller PR, Williams A |
| 843 - 849 |
Correlation of chemical and physical properties of an Alaska heavy oil from the Ugnu formation
Li KJ, Akeredolu BA, Renehan AM, Yang Y, Batzle M, Evans RJ, Dorgan JR, Liberatore MW, Herring AM |
| 850 - 861 |
Spray and atomization of diesel fuel and its alternatives from a single-hole injector using a common rail fuel injection system
Chen PC, Wang WC, Roberts WL, Fang TG |
| 862 - 868 |
Lifted flame behavior of a non-premixed oxy-methane jet in a lab-scale slot burner
Oh J, Noh D |
| 869 - 875 |
Different selections of active sites for CO, C3H6, and C10H22 oxidation on Pd/CeO2 catalysts
Shen MQ, Wei GX, Yang HM, Wang J, Wang XQ |
| 876 - 883 |
Application of response surface methodology to oil spill remediation
Bravo-Linares C, Ovando-Fuentealba L, Mudge SM, Loyola-Sepulveda R |
| 884 - 891 |
Improvement on a skeletal chemical kinetic model of iso-octane for internal combustion engine by using a practical methodology
Liu YD, Jia M, Xie MZ, Pang B |
| 892 - 898 |
Numerical analysis on knock for a high compression ratio spark-ignition methanol engine
Zhen XD, Wang Y, Xu SQ, Zhu YS |
| 899 - 904 |
Estimation of lower flammability limit temperature of chemical compounds using a corresponding state method
Gharagheizi F, Ilani-Kashkouli P, Mohammadi AH |
| 905 - 914 |
Simultaneous oil recovery and residual gas storage: A pore-level analysis using in situ X-ray micro-tomography
Iglauer S, Paluszny A, Blunt MJ |
| 915 - 922 |
Effect of the interactions between volatiles and char on sulfur transformation during brown coal upgrade by pyrolysis
Zhang YL, Wang MJ, Qin Z, Yang YL, Fu CH, Feng L, Chang LP |
| 923 - 931 |
Thermal cracking kinetics of Kuwaiti vacuum residues in Eureka process
AlHumaidan F, Lababidi HMS, Al-Rabiah H |
| 932 - 942 |
Effect of flue gas impurities on the performance of a chemical looping based air separation process for oxy-fuel combustion
Shah K, Moghtaderi B, Wall T |
| 943 - 949 |
Production of solid biochar fuel from waste biomass by hydrothermal carbonization
Liu ZG, Quek A, Hoekman SK, Balasubramanian R |
| 950 - 955 |
Catalytic reforming of tar during gasification. Part III. Effects of feedstock on tar reforming using ilmenite as a catalyst
Min Z, Yimsiri P, Zhang S, Wang Y, Asadullah M, Li CZ |
| 956 - 962 |
An experimental study on turbulent lifted flames of methane in coflow jets at elevated temperatures
Choi BC, Chung SH |
| 963 - 969 |
Influence of production variables for biodiesel synthesis on yields and fuel properties, and optimization of production conditions
Abuhabaya A, Fieldhouse J, Brown D |
| 970 - 979 |
Alteration of sewage sludge biomass into oil-like products by hydrous pyrolysis methods
Rushdi AI, Al-Mutlaq KF, Sasmal SK, Simoneit BRT |
| 980 - 986 |
Etherification of glycerol for improved production of oxygenates
Viswanadham N, Saxena SK |
| 987 - 996 |
Performance characteristics of a pilot-scale biomass gasifier using oxygen-enriched air and steam
Huynh CV, Kong SC |
| 997 - 1002 |
Fast oxidative desulfurization of fuel oil using dialkylpyridinium tetrachloroferrates ionic liquids
Nie Y, Dong YX, Bai L, Dong HF, Zhang XP |
| 1003 - 1009 |
Biomethane production by anaerobic digestion of organic waste
Molino A, Nanna F, Ding Y, Bikson B, Braccio G |
| 1010 - 1017 |
Catalytic deoxygenation of triglycerides and fatty acids to hydrocarbons over carbon-supported nickel
Santillan-Jimenez E, Morgan T, Lacny J, Mohapatra S, Crocker M |
| 1018 - 1022 |
Measurement and prediction of the speed of sound of biodiesel fuels
Freitas SVD, Paredes MLL, Daridon JL, Lima AS, Coutinho JAP |
| 1023 - 1031 |
Coal macerals separation by reflux classification and thermo-swelling analysis based on the Computer Aided Thermal Analysis
Xie W, Stanger R, Lucas J, Wall T, Mahoney M |
| 1032 - 1038 |
Synthesis gas production from partial oxidation of methane over highly dispersed Pd/SiO2 catalyst
Li B, Li H, Weng WZ, Zhang Q, Huang CJ, Wan HL |
| 1039 - 1050 |
Biodesulphurized low rank coal: Maritza east lignite and its "humus-like" byproduct
Gonsalvesh L, Marinov SP, Stefanova M, Carleer R, Yperman J |
| 1051 - 1059 |
Formulation of an RP-1 pyrolysis surrogate from shock tube measurements of fuel and ethylene time histories
MacDonald ME, Davidson DF, Hanson RK, Pitz WJ, Mehl M, Westbrook CK |
| 1060 - 1068 |
Fuel and Ethylene Measurements during n-dodecane, methylcyclohexane, and iso-cetane pyrolysis in shock tubes
MacDonald ME, Ren W, Zhu YY, Davidson DF, Hanson RK |
| 1069 - 1079 |
Performance characteristics of a compression-ignition engine using direct-injection ammonia-DME mixtures
Gross CW, Kong SC |
| 1080 - 1089 |
Influence of steam on gasification of millimetric wood particles in a drop tube reactor: Experiments and modelling
Septien S, Valin S, Peyrot M, Spindler B, Salvador S |
| 1090 - 1105 |
Influence of turbulence-kernel interactions on flame development in lean methane/air mixtures under natural gas-fueled engine conditions
Reddy H, Abraham J |
| 1106 - 1110 |
Aminopropylsilica as an environmentally friendly and reusable catalyst for biodiesel production from soybean oil
Xie WL, Zhao LL |
| 1111 - 1122 |
Influence of the support and promotion on the structure and catalytic performance of copper-cobalt catalysts for carbon monoxide hydrogenation
Wang JJ, Chernavskii PA, Wang Y, Khodakov AY |
| 1123 - 1131 |
Post injection in a compression ignition engine fueled with dimethyl-ether
Yoon H, Bae C |
| 1132 - 1137 |
Heat transfer and thermal cracking behavior of hydrocarbon fuel
Hou LY, Dong N, Sun DP |
| 1138 - 1143 |
Effects of ethyl-tert-butyl ether (ETBE) addition on the physicochemical properties of diesel oil and particulate matter and smoke emissions from diesel engines
Gorski K, Sen AK, Lotko W, Swat M |
| 1144 - 1147 |
Effect of cooling rate on the wax precipitation temperature of "waxy" mixtures
Kasumu AS, Arumugam S, Mehrotra AK |
| 1148 - 1153 |
Production of renewable gasoline from aqueous phase hydrogenation of lignin pyrolysis oil
Ben HX, Mu W, Deng YL, Ragauskas AJ |
| 1154 - 1157 |
New spray flamelet equations considering evaporation effects in the mixture fraction space
Luo K, Fan JR, Cen KF |
| 1158 - 1163 |
A green potentiometric method for the determination of the iodine number of biodiesel
Tubino M, Aricetti JA |
| 1164 - 1167 |
Direct simultaneous determination of Pb(II) and Cu(II) in biodiesel by anodic stripping voltammetry at a mercury-film electrode using microemulsions
Martiniano LC, Abrantes VR, Neto SY, Marques EP, Fonseca TCO, Paim LL, Souza AG, Stradiotto NR, Aucelio RQ, Cavalcante GHR, Marques ALB |
