1 - 12 |
Electron probe microanalysis of major and trace elements in coals and their low-temperature ashes from the Wulantuga and Lincang Ge ore deposits, China Wei Q, Dai SF, Lefticariu L, Costin G |
13 - 21 |
Beneficial effects of dry bottom ash extraction and recycling in modern PCF power plants Ricci D, Bassetti F, Savastano S |
22 - 29 |
Experimental and modeling study of farnesane Richter S, Kathrotia T, Naumann C, Kick T, Slavinskaya N, Braun-Unkhoff M, Riedel U |
30 - 39 |
Simultaneous removal of Hg-0 and NO from simulated flue gas over columnar activated coke granules loaded with La2O3-CeO2 at low temperature Gao L, Li CT, Lu P, Zhang J, Du XY, Li SH, Tang L, Chen JQ, Zeng GM |
40 - 45 |
Combined production of power and syngas in an internal combustion engine - Experiments and simulations in SI and HCCI mode Wiemann S, Hegner R, Atakan B, Schulz C, Kaiser SA |
46 - 56 |
Evolution of shale apparent permeability under variable boundary conditions Peng Y, Liu JS, Pan ZJ, Qu HY, Connell L |
57 - 65 |
Modeling the impact of the presence of KCl on the slow pyrolysis of cellulose Ferreiro AI, Rabacal M, Costa M, Giudicianni P, Grottola CM, Ragucci R |
66 - 79 |
Solar chemical looping gasification of biomass with the ZnO/Zn redox system for syngas and zinc production in a continuously-fed solar reactor Chuayboon S, Abanades S, Rodat S |
80 - 89 |
Application of multiparameter fundamental equations of state to predict the thermodynamic properties and phase equilibria of technological oil fractions Grigoriev B, Alexandrov I, Gerasimov A |
90 - 101 |
Particulate number and NOx trade-off comparisons between HVO and mineral diesel in HD applications Bohl T, Smallbone A, Tian G, Roskilly AP |
102 - 110 |
Pore structure characterization of coal by synchrotron radiation nano-CT Zhao YX, Sun YF, Liu SM, Chen ZW, Yuan L |
111 - 122 |
The effects of surface temperature on the deposit behaviors of gasoline on a hot surface Song HY, Xiao J, Yang XP, Yu K, Huang Z |
123 - 141 |
Fungal metabolites as precursors to renewable transportation fuels Butcher MG, Meyer PA, Hallen RT, Albrecht KO, Clayton CK, Polikarpov E, Rappe KG, Jones SB, Magnuson JK |
142 - 152 |
Microscopic investigation of near-field spray characteristics of 2-methylfuran, ethanol and isooctane under flash boiling conditions Wang B, Wang ZM, Bao XC, Li YF, Jiang YZ, Xu HM, Zhang XY |
153 - 160 |
Effects of the modified kaolin sorbents on the reduction of ultrafine particulate matter (PM0.2) emissions during pulverized coal combustion Sun W, Liu XW, Xu YS, Zhang Y, Chen D, Chen ZG, Xu MH |
161 - 170 |
Effects of oxygenated fuel blends on the composition of size-segregated engine-out diesel particulate emissions and on the toxicity of quasi-ultrafine particles Zhang ZH, Balasubramanian R |
171 - 177 |
Oil/water/rock wettability: Influencing factors and implications for low salinity water flooding in carbonate reservoirs Chen YQ, Xie Q, Sari A, Brady PV, Saeedi A |
178 - 186 |
The role of molecule cluster on the azeotrope and boiling points of isooctane-ethanol blend Waluyo B, Wardana ING, Yuliati L, Sasongko MN |
187 - 195 |
Experimental investigations on the thermophysical properties of methyl myristate in alcoholic solutions Yang FX, Wang XP, Tan HZ, He SY, Liu ZG |
196 - 203 |
Grand canonical Monte Carlo simulations of pore structure influence on methane adsorption in micro-porous carbons with applications to coal and shale systems Song WH, Yao J, Ma JS, Li AF, Li Y, Sun H, Zhang L |
204 - 211 |
Rapid and sensitive method for detecting adulterants in gasoline using ultra-fast gas chromatography and Partial Least Square Discriminant Analysis Nespeca MG, Munhoz JFVL, Flumignan DL, de Oliveira JE |
212 - 225 |
Separation and characterization of biofuels in the jet fuel and diesel fuel ranges by fractional distillation of organic liquid products Mancio AA, da Mota SAP, Ferreira CC, Carvalho TUS, Neto OS, Zamian JR, Araujo ME, Borges LEP, Machado NT |
226 - 231 |
Complete encapsulation of zeolite supported Co based core with silicalite-1 shell to achieve high gasoline selectivity in Fischer-Tropsch synthesis Javed M, Cheng SL, Zhang GH, Dai PY, Cao YN, Lu CX, Yang RQ, Xing C, Shan SD |
232 - 238 |
Synergistic effect of HCl and NO in elemental mercury catalytic oxidation over La2O3-TiO2 catalyst Jiang SJ, Liu X, Li HL, Wang J, Yang ZQ, Peng HY, Shih KM |
239 - 248 |
Adaptation of hard coal with high sinterability for solid fuel boilers in residential heating systems Lasek JA, Matuszek K, Hrycko P, Piechaczek M |
249 - 257 |
Synthesis, characterization and antioxidant properties of 2,4,6-tris-isopropylbenzoic acid hydrazide in biodiesel Bar F, Hopf H, Knorr M, Krahl J |
258 - 265 |
Insight into transformation of sulfur species during KOH activation of high sulfur petroleum coke Shan J, Huang JJ, Li JZ, Li G, Zhao JT, Fang YT |
266 - 271 |
Effect of the moisture content of straw on the internal friction angle of a granular biomass-coal system Chen XL, Xu Y, Lu HF, Guo XL |
272 - 284 |
Experimental study on combustion and emission characteristics of turbocharged gasoline direct injection (GDI) engine under cold start new European driving cycle (NEDC) Zhu GH, Liu JP, Fu JQ, Xu ZX, Guo QY, Zhao H |
285 - 289 |
Mesophilic anaerobic co-digestion of sewage sludge with glycerine: Effect of solids retention time Zahedi S, Rivero M, Solera R, Perez M |
290 - 297 |
Pelletization properties of raw and torrefied pine sawdust: Effect of co-pelletization, temperature, moisture content and glycerol addition Garcia R, Gonzalez-Vazquez MP, Pevida C, Rubiera F |
298 - 311 |
Experimental and numerical study of the convective mass transfer of solvent in the Expanding-Solvent SAGD process Meng L, Ji DQ, Dong MZ, Maini B |
312 - 319 |
Simultaneous disposal and utilization of coal chemical wastewater in coal and petroleum coke slurry preparation: Slurrying performance and mechanism Wang RK, Ye XM, Zhao ZH, Yin QQ, Qi ZF, Wang ZY |
320 - 329 |
Pressure effects on flame structures and chemical pathways for lean premixed turbulent H-2/air flames: Three-dimensional DNS studies Wang XJ, Jin T, Xie YL, Luo KH |
330 - 338 |
Efficient extraction of indole from wash oil by quaternary ammonium salts via forming deep eutectic solvents Ji YA, Hou YC, Ren SH, Niu MG, Yao CF, Wu WZ |
339 - 351 |
Gasoline compression ignition operation on a multi-cylinder heavy duty diesel engine Mao B, Chen P, Liu HF, Zheng ZQ, Yao MF |
352 - 362 |
Influence of fuel properties on multi-cylinder PPC operation over a wide range of EGR and operating conditions Mao B, Liu HF, Zheng ZQ, Yao MF |
363 - 369 |
Non-Targeted chemical characterization of a Marcellus shale gas well through GC x GC with scripting algorithms and high-resolution time-of-flight mass spectrometry Piotrowski PK, Weggler BA, Barth-Naftilan E, Kelly CN, Zimmermann R, Saiers JE, Dorman FL |
370 - 377 |
Multi-metal catalysts for slurry-phase hydrocracking of coal-tar vacuum residue: Impact of inherent inorganic minerals Du JT, Deng WA, Li C, Zhang ZL, Yang TF, Cao XP, Du F, Sun Q |
378 - 385 |
Experimental research on combustion characteristics of coal gasification fly ash in a combustion chamber with a self-preheating burner Ouyang ZQ, Liu W, Zhu JG, Liu JZ, Man CB |
386 - 394 |
Intermolecular interaction mechanism of lignin pyrolysis: A joint theoretical and experimental study Jiang XY, Lu Q, Hu B, Liu J, Dong CQ, Yang YP |
395 - 405 |
Assess of biomass co-firing under oxy-fuel conditions on Hg speciation and ash deposit formation Contreras ML, Ganesh N, Rodilla I, Bahillo A |
406 - 416 |
Metal particles supported on SiO2-OH nanosphere: New insight into interactions with metals for cellulose conversion to ethylene glycol Xiao ZQ, Fan Y, Cheng YJ, Zhang Q, Ge Q, Sha RY, Ji JB, Mao JW |
417 - 428 |
Experimental analysis on post-explosion residues for evaluating coal dust explosion severity and flame propagation behaviors Li QZ, Yuan CC, Tao QL, Zheng YN, Zhao Y |
429 - 437 |
Investigation on the highly negative curved syngas Bunsen flame and the critical local Karlovitz number when tip opening Wang JH, Nie YH, Cai X, Guo SL, Zhang WJ, Xie YL, Huang ZH |
438 - 445 |
Interactions during co-pyrolysis of direct coal liquefaction residue with lignite and the kinetic analysis Xu JL, Bai ZQ, Li Z, Guo ZX, Hao P, Bai J, Li W |
446 - 453 |
Effects of atmospheres on sulfur release and its transformation behavior during coal thermolysis Yang NN, Guo HQ, Liu FR, Zhang H, Hu YF, Hu RS |
454 - 462 |
Emulsifier-free Water-in-Diesel emulsion fuel: Its stability behaviour, engine performance and exhaust emission Ithnin AM, Yahya WJ, Ahmad MA, Ramlan NA, Kadir HA, Sidik NAC, Koga T |
463 - 467 |
Role of silanol groups on silica gel on adsorption of benzothiophene and naphthalene Fujiki J, Yogo K, Furuya E |
468 - 473 |
An experimental research on woodchip drying using a screw conveyor dryer Kaplan O, Celik C |
474 - 483 |
Using nanofluids to control fines migration for oil recovery: Nanofluids co-injection or nanofluids pre-flush? -A comprehensive answer Yuan B, Moghanloo RG, Wang WD |
484 - 491 |
Surfactant-less alkali-cosolvent-polymer floods for an acidic crude oil Sharma H, Panthi K, Mohanty KK |
492 - 498 |
Valorization of food waste from restaurants by transesterification of the lipid fraction Carmona-Cabello M, Leiva-Candia D, Castro-Cantarero JL, Pinzi S, Dorado MP |
499 - 505 |
Zeolite-hydroxyapatite-activated oil palm ash composite for antibiotic tetracycline adsorption Khanday WA, Hameed BH |
506 - 514 |
Thermogravimetric and mass spectrometric (TG-MS) analysis of subbituminous coal-energy crops blends in N-2, air and CO2/O-2 atmospheres Rodilla I, Contreras ML, Bahillo A |
515 - 521 |
Petrochemical feedstock from pyrolysis of waste polyethylene and polypropylene using different catalysts Santos BPS, Almeida D, Marques MDV, Henriques CA |
522 - 527 |
Variation of solid fraction with cold flow properties of biodiesel produced from waste frying oil Evcil A, Al-Shanableh F, Savas MA |
528 - 540 |
Investigation of temperature effects from LCO2 with different cycle parameters on the coal pore variation based on infrared thermal imagery and low-field nuclear magnetic resonance Xu JZ, Zhai C, Liu SM, Qin L, Dong RW |
541 - 550 |
Ionic liquid on the acidic organic-inorganic hybrid mesoporous material with good acid-water resistance for biodiesel production Fan MM, Liu H, Zhang PB |
551 - 560 |
Association characteristic study and preliminary recovery investigation of rare earth elements from Fire Clay seam coal middlings Zhang WC, Yang XB, Honaker RQ |
561 - 571 |
Pore-scale analysis of gas huff-n-puff enhanced oil recovery and waterflooding process Wan T, Wan WM, Jiang JQ, Zhang YD |
572 - 579 |
Comparison of gaseous and particulate emissions from a pilot-scale combustor using three varieties of coal Yelverton TLB, Brashear AT, Nash DG, Brown JE, Singer CF, Kariher PH, Ryan JV |
580 - 591 |
Subsurface CO2 storage estimation in Bakken tight oil and Eagle Ford shale gas condensate reservoirs by retention mechanism Pranesh V |
592 - 600 |
Extraction induced by emulsion breaking: A model study on metal extraction from mineral oil Cassella RJ, Brum DM, Robaina NF, Lima CF |
601 - 611 |
LCA of a multifunctional bioenergy chain based on pellet production Ruiz D, San Miguel G, Corona B, Lopez FR |
612 - 618 |
The ignition process measurements and performance evaluations for hypergolic ionic liquid fuels: [EMIm][DCA] and [BMIm][DCA] Li JL, Weng XY, Tang CL, Zhang QH, Fan W, Huang ZH |
619 - 630 |
Acid-alternating-base (AAB) technology for blockage removal and enhanced oil recovery in sandstone reservoirs Zhu DY, Hou JR, Wang JF, Wu X, Wang P, Bai BJ |
631 - 637 |
Optimized asphaltene separation by online coupling of size exclusion chromatography and ultrahigh resolution mass spectrometry Guricza LM, Schrader W |
638 - 646 |
Migration and emission of mercury from circulating fluidized bed boilers co-firing petroleum coke and coal Cui J, Duan LB, Jiang Y, Zhao CS, Anthony EJ |
647 - 654 |
Modified simultaneous saccharification and fermentation to enhance bioethanol titers and yields Xu YJ, Li J, Zhang M, Wang DH |
655 - 664 |
Performance of bio-char and energy analysis on CH4 combined reforming by CO2 and H2O into syngas production with assistance of microwave Li LZ, Yang ZJ, Chen J, Qin XM, Jiang XW, Wang FM, Song ZL, Ma CY |
665 - 674 |
Experimental investigation of N-2 injection to enhance gas drainage in CO2-rich low permeable seam Lin J, Ren T, Wang GD, Booth P, Nemcik J |
675 - 685 |
Production of bio-jet fuel range alkanes from catalytic deoxygenation of Jatropha fatty acids on a WOx/Pt/TiO2 catalyst Choi IH, Lee JS, Kim CU, Kim TW, Lee KY, Hwang KR |
686 - 694 |
Hydrogen-enriched gas production from kerosene using an atmospheric pressure microwave plasma system Czylkowski D, Hrycak B, Miotk R, Jasinski M, Dors M, Mizeraczyk J |
695 - 703 |
Contributions of tailored oxygen vacancies in ZnO/Al2O3 composites to the enhanced ability for H2S removal at room temperature Yang C, Wang J, Fan HL, Ju SG, Mi J, Huo C |
704 - 704 |
The effects of specific surface area and ash on char gasification mechanisms in the mixture of H2O, CO2, H-2 and CO (vol 209, pg 109, 2017) Zhang R, Chen YF, Lei K, Liu D |
705 - 713 |
Improved production of biolubricants from soybean oil and different polyols via esterification reaction catalyzed by immobilized lipase from Candida rugosa Cavalcanti EDC, Aguieiras ECG, da Silva PR, Duarte JG, Cipolatti EP, Fernandez-Lafuente R, da Silva JAC, Freire DMG |
714 - 725 |
Flame propagation through heterogeneous combustion of hybrid aluminum-boron poly-disperse particle suspensions in air Bidabadi M, Bozorg MV, Bordbar V, Ahmadi G |
726 - 734 |
Assessment of graphene as an alternative microporous layer material for proton exchange membrane fuel cells Ozden A, Shahgaldi S, Zhao J, Li XG, Hamdullahpur F |
735 - 743 |
Facile synthesis of silica aerogel supported K2CO3 sorbents with enhanced CO2 capture capacity for ultra-dilute flue gas treatment Guo YF, Zhao CW, Sun J, Li WL, Lu P |
744 - 755 |
Waste lube-oil based fuel characterization in real conditions. Case study: Bottom-trawl fishing vessel powered with medium speed diesel engine Uriondo Z, Gabina G, Basurko OC, Clemente M, Aldekoa S, Martin L |
756 - 765 |
Relationship between the zeta potential and the chemical agglomeration efficiency of fine particles in flue gas during coal combustion Guo YQ, Zhao YC, Wang SL, Jiang C, Zhang JY |
766 - 777 |
Regular solution based approach to modeling asphaltene precipitation from native and reacted oils: Part 2, molecular weight, density, and solubility parameter of saturates, aromatics, and resins Yarranton HW, Powers DP, Okafor JC, van den Berg FGA |
778 - 786 |
Oxy-fuel combustion study of biomass fuels in a 20 kW(th) fluidized bed combustor Sher F, Pans MA, Sun CG, Snape C, Liu H |
787 - 798 |
Chemical looping partial oxidation of methane with CO2 utilization on the ceria-enhanced mesoporous Fe2O3 oxygen carrier Kang D, Lee M, Lim HS, Lee JW |
799 - 812 |
Characteristics of high temperature co-gasification and ash slagging for Victorian brown coal char and bituminous coal blends Dai BQ, Hoadley A, Zhang L |
813 - 824 |
A critical review of the CO2 huff 'n' puff process for enhanced heavy oil recovery Zhou X, Yuan QW, Peng XL, Zeng FH, Zhang LH |
825 - 834 |
Production of hydrocarbon fuels from heavy fraction of bio-oil through hydrodeoxygenative upgrading with Ru-based catalyst Zhang XH, Tang WW, Zhang Q, Li YP, Chen LG, Xu Y, Wang CG, Ma LL |
835 - 843 |
Water assisted liquefaction of lignocellulose biomass by ReaxFF based molecular dynamic simulations Rismiller SC, Groves MM, Meng M, Dong Y, Lin J |
844 - 852 |
Coal permeability: Gas slippage linked to permeability rebound Niu YF, Mostaghimi P, Shikhov I, Chen ZX, Armstrong RT |
853 - 864 |
Turbulent flow-field effects in a hybrid CFD-CRN model for the prediction of NOx and CO emissions in aero-engine combustors Innocenti A, Andreini A, Bertini D, Facchini B, Motta M |
865 - 878 |
Conversion of petroleum coke into valuable products using oxy-cracking technique Manasrah AD, Nassar NN, Ortega LC |
879 - 891 |
An experimental and modeling study to investigate effects of different injection parameters on a direct injection HCCI combustion fueled with ethanol-gasoline fuel blends Coskun G, Demir U, Soyhan HS, Turkcan A, Ozsezen AN, Canakci M |
892 - 903 |
Mass balance and partitioning of trace elements under oxy-coal combustion: First experiences Cordoba P, Diego R |
904 - 914 |
Developing a robust proxy model of CO2 injection: Coupling Box-Behnken design and a connectionist method Ahmadi MA, Zendehboudi S, James LA |
915 - 927 |
Experimental and material balance equations analyses of cyclic solvent injection based on a large 3D physical model Du ZW, Zeng FH, Peng XL, Chan C |