Thin Solid Films, Vol.520, No.7, 2855-2867, 2012
Thermal stability of silver thin films on zirconia substrates
The thermal stability of silver thin films between 100 nm and 820 nm thick deposited onto single crystal yttria-stabilised zirconia (YSZ) substrates by evaporation was investigated by annealing the films between 250 degrees C and 550 degrees C for different durations. Films approximately 100 nm thick were thermally unstable at temperatures as low as 250 degrees C. A dewetting process occurred in which grain boundaries ruptured, to uncover the substrate and reduce the overall energy of the system, by a combination of grain boundary grooving at the outer surface and void growth at the Ag-YSZ interface. The surface self diffusion coefficient of Ag was determined from the kinetics of the process to be 2.6 +/- 03 x 10(-5) cm(2)s(-1) at 500 degrees C. The resulting silver morphology ranged from 'self-organised' interconnected silver network structures to completely isolated silver islands. A structure predominance map of the rearrangement process is presented. (C) 2011 Elsevier B.V. All rights reserved.