The electrochemical studies of the corrosion resistance behaviour of hydroxyapatite coatings on stainless steel fabricated by electrophoretic deposition

Kean-Khoon Chew; Sharif Hussein Sharif Zein; Abdul Latif Ahmad; David S. McPhail; Muhammad Faiq Abdullah

Journal of Industrial and Engineering Chemistry, Vol.19, No.4, 1123-1129, July, 2013

DOI10.1016/j.jiec.2012.12.008 Export Citation

The electrochemical studies of the corrosion resistance behaviour of hydroxyapatite coatings on stainless steel fabricated by electrophoretic deposition

Kean-Khoon Chew, Sharif Hussein Sharif Zein^†, Abdul Latif Ahmad, David S. McPhail¹, and Muhammad Faiq Abdullah

School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, Seberang Perai Selatan, Pulau Pinang, Malaysia
¹Department of Materials, Imperial College London, Prince Consort Road, London SW7 2AZ, UK

E-mail:

HA was coated on stainless steel (SS) 316L by using electrophoretic deposition to impart corrosion resistance upon SS 316L. Consequently, corrosion behaviour of HA coated SS 316L deposited from applied voltages 10 V to 60 V (denoted as HA/SS316L-10V until -60V) was evaluated in comparison with pristine SS 316L by various electrochemical studies. As results, linear potentiodynamic polarisation result suggested that HA/SS316L-40V exhibits highest open circuit potential indicating that successful protection of HA coating. Additionally, cyclic polarisation studies revealed that HA coated SS 316L improves pitting corrosion resistance. Finally, EIS results demonstrated that higher polarisation resistance and lower capacitance values for HA/SS316L-40V.

Keywords:Stainless steel;Hydroxyapatite;Electrophoretic deposition;Electrochemical study

[References]

Sivakumar M, Mudali UK, Rajeswari S, J. Mater. Sci. Lett., 14(2), 148 (1995)
Gopi D, Prakash VCA, Kavitha L, Materials Science & Engineering C: Biomimetic and Supramolecular Systems., 29, 955 (2009)
Sridhar TM, Mudali UK, Subbaiyan M, Corrosion Science., 45, 237 (2003)
Gurappa I, Surface and Coatings Technology., 161, 70 (2002)
Sivakumar M, Rajeswari S, Journal of Materials Science Letters., 11, 1039 (1992)
Tu¨ ken T, Surface and Coatings Technology., 200, 4713 (2006)
Costa MA, Fernandes MH, Journal of Materials Science: Materials in Medicine., 11, 141 (2000)
Oh KT, Park YS, Surface and Coatings Technology., 110, 4 (1998)
Montenero A, Gnappi G, Ferrari F, Cesari M, Salvioli E, Mattogno L, Kaciulis S, Fini M, J. Mater. Sci., 35(11), 2791 (2000)
Feng B, Chen JY, Zhang XD, Key Engineering Materials., 192-195, 167 (2001)
Gao W, Lui ZY, Li ZW, Adv. Mater., 13(12-13), 1001 (2001)
Gurrappa I, Corrosion Prevention and Control., 48, 23 (2001)
Kokubo T, et al., Journal of Biomedical Materials Research., 24, 331 (1990)
Kokubo T, et al., Journal of Biomedical Materials Research., 24, 721 (1990)
Al-Mobarak NA, Al-Swayih AA, Al-Rashoud FA, International Journal of Electrochemical Science., 6, 2031 (2011)
Gluszek J, Masalski J, British Corrosion Journal., 27, 135 (1992)
Oldfield JW, International Materials Reviews., 32, 153 (1987)
Zhitomirsky I, Gal-Or L, Journal of Materials Science: Materials in Medicine., 8, 213 (1997)
Stratmann M, Frankel GS, Encyclopedia of electrochemistry: corrosion and oxide films, in: Frankel GS, Rohwerder M (Eds.), Electrochemical Techniques for Corrosion, vol. 4, The University of Michigan: Wiley-VCH, Weinheim, Germany,, 745 (2003)
Szklarska-Smialowska Z, Pitting Corrosion of Metals, NACE International, Houston, TX (1986)
Ducheyne P, et al., Biomaterials., 11, 244 (1990)
Raghu T, Malhotra SN, Ramakrishnan P, Corrosion., 45, 698 (1989)
Sivakumar M, Mudali UK, Rajeswari S, Journal of Materials Engineering and Performance., 3, 744 (1994)
Lopez MF, Gutierrez A, Jimenez JA, Electrochim. Acta, 47(9), 1359 (2002)
Zheng YF, et al., Materials Science and Engineering A., 438, 891 (2006)
Wong MH, Cheng FT, Man HC, Appl. Surf. Sci., 253(18), 7527 (2007)
Raman V, Nagarajan S, Rajendran N, Electrochemistry Communications., 8, 1309 (2006)
Chang E, Lee TM, Biomaterials., 23, 2917 (2002)
Mansfeld F, Analysis and interpretation of EIS data for metals and alloys, Technical Report (1993)
Pan J, et al., Journal of Biomedical Materials Research., 35, 309 (1997)
Zhang Z, et al., Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals., 11, 284 (2001)
Uruchurtu CJ, Electrochemical Investigations of the Activation Mechanism of Aluminum, vol. 47, ETATS-UNIS: NACE International, Houston, TX (1991)
Macdonald JR, Annals of Biomedical Engineering., 20, 289 (1992)
Rondelli G, et al., Biomaterials., 26, 739 (2005)
Qiu DL, Wang AP, Yin YS, Appl. Surf. Sci., 257(5), 1774 (2010)
Gu X, et al., Biomaterials., 30, 484 (2009)
Fekry AM, El-Sherif RM, Electrochim. Acta, 54(28), 7280 (2009)

[Referenced By]

[1] Sivakumar M, Mudali UK, Rajeswari S, J. Mater. Sci. Lett., 14(2), 148 (1995)

[2] Gopi D, Prakash VCA, Kavitha L, Materials Science & Engineering C: Biomimetic and Supramolecular Systems., 29, 955 (2009)

[3] Sridhar TM, Mudali UK, Subbaiyan M, Corrosion Science., 45, 237 (2003)

[4] Gurappa I, Surface and Coatings Technology., 161, 70 (2002)

[5] Sivakumar M, Rajeswari S, Journal of Materials Science Letters., 11, 1039 (1992)

[6] Tu¨ ken T, Surface and Coatings Technology., 200, 4713 (2006)

[7] Costa MA, Fernandes MH, Journal of Materials Science: Materials in Medicine., 11, 141 (2000)

[8] Oh KT, Park YS, Surface and Coatings Technology., 110, 4 (1998)

[9] Montenero A, Gnappi G, Ferrari F, Cesari M, Salvioli E, Mattogno L, Kaciulis S, Fini M, J. Mater. Sci., 35(11), 2791 (2000)

[10] Feng B, Chen JY, Zhang XD, Key Engineering Materials., 192-195, 167 (2001)

[11] Gao W, Lui ZY, Li ZW, Adv. Mater., 13(12-13), 1001 (2001)

[12] Gurrappa I, Corrosion Prevention and Control., 48, 23 (2001)

[13] Kokubo T, et al., Journal of Biomedical Materials Research., 24, 331 (1990)

[14] Kokubo T, et al., Journal of Biomedical Materials Research., 24, 721 (1990)

[15] Al-Mobarak NA, Al-Swayih AA, Al-Rashoud FA, International Journal of Electrochemical Science., 6, 2031 (2011)

[16] Gluszek J, Masalski J, British Corrosion Journal., 27, 135 (1992)

[17] Oldfield JW, International Materials Reviews., 32, 153 (1987)

[18] Zhitomirsky I, Gal-Or L, Journal of Materials Science: Materials in Medicine., 8, 213 (1997)

[19] Stratmann M, Frankel GS, Encyclopedia of electrochemistry: corrosion and oxide films, in: Frankel GS, Rohwerder M (Eds.), Electrochemical Techniques for Corrosion, vol. 4, The University of Michigan: Wiley-VCH, Weinheim, Germany,, 745 (2003)

[20] Szklarska-Smialowska Z, Pitting Corrosion of Metals, NACE International, Houston, TX (1986)

[21] Ducheyne P, et al., Biomaterials., 11, 244 (1990)

[22] Raghu T, Malhotra SN, Ramakrishnan P, Corrosion., 45, 698 (1989)

[23] Sivakumar M, Mudali UK, Rajeswari S, Journal of Materials Engineering and Performance., 3, 744 (1994)

[24] Lopez MF, Gutierrez A, Jimenez JA, Electrochim. Acta, 47(9), 1359 (2002)

[25] Zheng YF, et al., Materials Science and Engineering A., 438, 891 (2006)

[26] Wong MH, Cheng FT, Man HC, Appl. Surf. Sci., 253(18), 7527 (2007)

[27] Raman V, Nagarajan S, Rajendran N, Electrochemistry Communications., 8, 1309 (2006)

[28] Chang E, Lee TM, Biomaterials., 23, 2917 (2002)

[29] Mansfeld F, Analysis and interpretation of EIS data for metals and alloys, Technical Report (1993)

[30] Pan J, et al., Journal of Biomedical Materials Research., 35, 309 (1997)

[31] Zhang Z, et al., Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals., 11, 284 (2001)

[32] Uruchurtu CJ, Electrochemical Investigations of the Activation Mechanism of Aluminum, vol. 47, ETATS-UNIS: NACE International, Houston, TX (1991)

[33] Macdonald JR, Annals of Biomedical Engineering., 20, 289 (1992)

[34] Rondelli G, et al., Biomaterials., 26, 739 (2005)

[35] Qiu DL, Wang AP, Yin YS, Appl. Surf. Sci., 257(5), 1774 (2010)

[36] Gu X, et al., Biomaterials., 30, 484 (2009)

[37] Fekry AM, El-Sherif RM, Electrochim. Acta, 54(28), 7280 (2009)