The system LSBT/YSZ (LSBT is La0.4Sr0.5Ba0.1TiO3) is a promising combination as an anode material for full ceramic SOFCs. An anode comprising a porous layer of YSZ impregnated with LSBT shows good performance for conversion of high sulfur content fuels. The microstructures within the composite matrix were determined and correlated with the parameters of the production process. The anodes were characterized electrochemically using impedance spectroscopy (EIS) and potentiodynamic tests performed at 850 degrees C with various fuels to determine the effect of H2S in the feeds: H-2, H-2/H2S (5000 ppm), CH4, CH4/H2S (5000 ppm). The highest power densities (200 mW cm(-2) in H-2/H2S) were obtained for LSBT/YSZ composites after impregnation six times with LSBT, corresponding to 12.6 wt% LSBT; further impregnations dramatically decreased performance as a result of restricted access of fuel to active sites. (C) 2012 Elsevier B.V. All rights reserved.