화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Macromolecular Research, Vol.23, No.10, 965-970, October, 2015
DOI10.1007/s13233-015-3119-9  Export Citation
Reactive compatibilization of polyketone/ethylene-octene rubber blends by diaminodecane
Yongho Kim, Choon Soo Lee1, Sunghun Kim, Hogun Jung, and Jae Young Jho†
  • School of Chemical and Biological Engineering, Seoul National University, Seoul, 151-744, Korea
  • 1Polymeric Materials Research Team, Hyundai Motor Group R&D Division, Hwaseong, Gyeonggi, 445-706, Korea
E-mail:
The reactive compatibilization of polyketone (PK) and maleic anhydride (MA)-grafted ethylene-octane rubber (mEOR) blends by addition of 1,10-diaminodecane (DA) was studied. Effects of DA were evaluated through the Fourier transform infrared (FTIR) spectroscopy, melt flow index (MFI), morphology, thermal, and mechanical properties. FTIR spectra indicated that DA reacted with PK and mEOR during melt blending and produced the PKmEOR inter-polymers at the interface. The addition of DA was found to decrease the MFI value, diminished the size of the dispersed phase, and enhanced its adhesion with PK matrix. For PK/mEOR/DA system, while the tensile properties were changed little, the impact strength was three times those of PK/mEOR blends. SEM observations of the blend morphology indicated that the impact strength of PK/mEOR blend was primarily controlled by the matrix ligament thickness.
Keywords:polyketone;ethylene-octene rubber;blend;compatibilizer;diamine
  1. Del Nobile MA, Mensitieri G, Sommazzi A, Polymer, 36(26), 4943 (1995)
  2. Sommazzi A, Garbassi F, Prog. Polym. Sci, 22, 1547 (1997)
  3. Belov GP, Novikova EV, Russ. Chem. Rev., 73, 267 (2004)
  4. Zuiderduin WCJ, Huetink J, Gaymans RJ, J. Appl. Polym. Sci., 91(4), 2558 (2004)
  5. Danforth RL, Gergen WP, Handlin DL, Lutz RG, US Patent 4,851,482 (1989).
  6. Gergen WP, Hart WW, US Patent 4,960,838 (1990).
  7. Asano A, Nishioka M, Takahashi Y, Kato A, Hikasa S, Iwabuki H, Nagata K, Sato H, Hasegawa T, Sawabe H, Arao M, Suda T, Isoda A, Mukai M, Ishikawa D, Izumi T, Macromolecules, 42(24), 9506 (2009)
  8. Gergen WP, Machado JM, Waters DG, Gingrich RP, US Patent 5,043,389 (1991).
  9. Gergen WP, US Patent 4,818,798 (1989).
  10. Gergen WP, Lutz RG, US Patent 5,071,916 (1991).
  11. Zuiderduin WCJ, Vlasveld DPN, Huetink J, Gaymans RJ, Polymer, 46(23), 10321 (2005)
  12. Zuiderduin WCJ, Vlasveld DPN, Huetink J, Gaymans RJ, Polymer, 45(11), 3765 (2004)
  13. Bai SL, Wang GT, Hiver JM, G'Sell C, Polymer, 45(9), 3063 (2004)
  14. Premphet-Sirisinha K, Chalearmthitipa S, Polym. Eng. Sci., 43(2), 317 (2003)
  15. Wu S, J. Polym. Sci. B: Polym. Phys., 21, 699 (1983)
  16. Wu S, Polymer, 26, 1855 (1985)
  17. Dompas D, Groeninckx G, Isogawa M, Hasegawa T, Kadokura M, Polymer, 35(22), 4760 (1994)
  18. Favis BD, Can. J. Chem. Eng., 69, 619 (1991)
  19. Phan TTM, DeNicola AJ, Schadler LS, J. Appl. Polym. Sci., 68(9), 1451 (1998)
  20. Marklund E, Gedde UW, Hedenqvist MS, Wiberg G, Polymer, 42(7), 3153 (2001)
  21. Gupta P, Schulte JT, Flood JE, Spruiell JE, J. Appl. Polym. Sci., 82(7), 1794 (2001)
  22. de la Orden MU, Matias MC, Urreaga JM, Polym. Degrad. Stabil., 85, 697 (2004)
  23. Mehdipour-Ataei S, Amirshaghaghi A, J. Appl. Polym. Sci., 96(2), 570 (2005)
  24. Faghihi K, Shabanian M, Int. J. Polym. Mater., 60, 505 (2011)
  25. Chiang CR, Tseng CR, Chang FC, J. Polym. Res., 4, 91 (1997)
  26. Birley AW, Haworth B, Batchelor J, in Physics of Plastics, Hanser, Munich, 1991, pp 12-13.
  27. Yoon LK, Choi CH, Kim BK, J. Appl. Polym. Sci., 56(2), 239 (1995)
  28. Sundararaj U, Macosko CW, Macromolecules, 28(8), 2647 (1995)
  29. Favis BD, Chalifoux JP, Polymer, 29, 1761 (1988)
  30. Huang JJ, Keskkula H, Paul DR, Polymer, 47(2), 639 (2006)
  31. Han C, Su X, Zhang K, Liu N, Dong L, Polym. Int., 56, 593 (2007)
  32. Bartczak Z, Argon AS, Cohen RE, Weinberg M, Polymer, 40(9), 2331 (1999)