Journal of Power Sources, Vol.362, 57-63, 2017
One new route to optimize the oxidation resistance of TiC/hastelloy (Ni-based alloy) composites applied for intermediate temperature solid oxide fuel cell interconnect by increasing graphite particle size
TiC/hastelloy composites with suitable thermal expansion and excellent electrical conductivity are promising candidates for IT-SOFC interconnect. In this paper, the TiC/hastelloy composites are fabricated by in-situ reactive infiltration, and the oxidation resistance of composites is optimized by increasing graphite particle size. Results show that the increase of graphite particles size from 1 gm to 40 gm reduces TiC particle size from 2.68 mu m to 2.22 mu m by affecting the formation process of TiC. Moreover, the decrease of TiC particles size accelerates the fast formation of dense and continuous TiO2/Cr2O3 oxide layer, which bring down the mass gain (800 degrees C/100 h) from 2.03 mg cm(-2) to 1.18 mg cm(-2). Meanwhile, the coefficient of thermal expansion decreases from 11.15 x 10(-6) degrees C-1 to 10.80 x 10(-6) degrees C-1, and electrical conductivity maintains about 5800 S cm(-1) at 800 degrees C. Therefore, the decrease of graphite particle size is one simple and effective route to optimize the oxidation resistance of composites, and meantime keeps suitable thermal expansion and good electrical conductivity. (C) 2017 Elsevier B.V. All rights reserved.
Keywords:Intermediate temperature solid oxide fuel cell;Interconnect;TiC/hastelloy composites;Graphite particle size;Oxidation resistance