화학공학소재연구정보센터
Korean Journal of Materials Research, Vol.27, No.12, 679-687, December, 2017
단결정 압축 변형 거동의 변형구배 결정소성 유한요소해석
Strain Gradient Crystal Plasticity Finite Element Modeling for the Compression Behaviors of Single Crystals
E-mail:
A strain-gradient crystal plasticity finite element method(SGCP-FEM) was utilized to simulate the compressive deformation behaviors of single-slip, (111)[101], oriented FCC single-crystal micro-pillars with two different slip-plane inclination angles, 36.3° and 48.7° and the simulation results were compared with those from conventional crystal plasticity finite element method(CP-FEM) simulations. For the low slip-plane inclination angle, a macroscopic diagonal shear band formed along the primary slip direction in both the CP- and SGCP-FEM simulations. However, this shear deformation was limited in the SGCP-FEM, mainly due to the increased slip resistance caused by local strain gradients, which also resulted in strain hardening in the simulated flow curves. The development of a secondly active slip system was altered in the SGCP-FEM, compared to the CP-FEM, for the low slip-plane inclination angle. The shear deformation controlled by the SGCP-FEM reduced the overall crystal rotation of the micro-pillar and limited the evolution of the primary slip system, even at 10% compression.
  1. Zhang H, Schuster BE, Wei Q, Ramesh KT, Scr. Mater., 54, 181 (2006)
  2. Zhao Z, Ramesh M, Raabe D, Cuitino AM, Radovitzky R, Int. J. Plasticity, 24, 2278 (2008)
  3. Choi YS, Parthasarathy TA, Dimiduk DM, Uchic MD, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 397, 69 (2005)
  4. Choi YS, Uchic MD, Parthasarathy TA, Dimiduk DM, Scr. Mater., 57, 849 (2007)
  5. Maaβ R, Van Petegem S, Ma D, Zimmermann J, Grolimund D, Roters F, Van Swygenhoven H, Raabe D, Acta Mater., 57, 5996 (2009)
  6. Raabe D, Ma D, Roters F, Acta Mater., 55, 4567 (2007)
  7. Musienko A, Tatschl A, Schmidegg K, Kolednik O, Pippan R, Cailetaud G, Acta Mater., 55, 4121 (2007)
  8. Heripre E, Dexet M, Crepin J, Gelebart L, Roos A, Bornert M, Caldemaison D, Int. J. Plasticity, 23, 1512 (2007)
  9. Kalidindi SR, Bhattacharyya A, Doherty RD, Proc. R. Soc. Lond. A, 460, 1935 (2004)
  10. Yang Y, Wang L, Bieler TR, Eisenlohr P, Crimp MA, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 42, 636 (2011)
  11. Rehrl C, Volker B, Kleber S, Antretter T, Pippan R, Acta Mater., 60, 2379 (2012)
  12. Raabe D, Sachtleber M, Zhao Z, Roters F, Zaefferer S, Acta Mater., 49, 3433 (2001)
  13. Lewis AC, Qidwai MAS, Geltmacher AB, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 41, 2522 (2010)
  14. Pyle D, Lu J, Littlewood D, Maniatty A, Comp. Mechanics, 52, 135 (2012)
  15. Zeghadi A, Forest S, Gourgues AF, Bouaziz O, Phil. Mag., 87, 1425 (2007)
  16. Lim H, Lee MG, Kim JK, Adams BL, Wagoner RH, Int. J. Plasticity, 27, 1328 (2011)
  17. Diard O, Leclercq S, Rousselier G, Cailletaud G, Int. J. Plasticity, 21, 691 (2005)
  18. Roters F, Eisenlohr P, Hantcherli L Tjahjanto D, Bieler TR, Raabe D, Acta Mater., 58, 1152 (2011)
  19. Ludwig W, King A, Reischig P, Herbiga M, Lauridsend EM, Schmidt S, Proudhon H, Forest S, Cloetens P, du Roscoat SR, Buffiere JY, Marrow TJ, Poulsen HF, Mat. Sci. Eng. A, 524, 69 (2009)
  20. Chandrasekaran D, Nygards M, Mat. Sci. Eng. A, 365, 191 (2004)
  21. Bieler TR, Eisenlohr P, Roters F, Kumar D, Mason DE, Crimp MA, Raabe D, Int. J. Plasticity, 25, 1655 (2009)
  22. Diard O, Leclercq S, Rousselier G, Cailletaud G, Comp. Mat. Sci., 25, 73 (2002)
  23. Qidwai MAS, Lewis AC, Geltmacher AB, Acta Mater., 57, 4233 (2009)
  24. Barbe F, Decker L, Jeulin D, Cailletaud G, Int. J. Plasticity, 17, 513 (2001)
  25. Marin E, Dawson PR, Appl. Mech. Eng., 165, 1 (1998)
  26. Harder J, Int. J. Plasticity, 15, 605 (1999)
  27. Becker R, Richmond O, Modelling Simul. Mat. Sci. Eng., 2, 439 (1994)
  28. Nye JF, Acta Metall., 1, 153 (1953)
  29. Acharya A, Bassani JL, J. Mech. Phys. Solids, 48, 1565 (2000)
  30. Acharya A, Beaudoin AJ, J. Mech. Phys. Solids, 48, 2213 (2000)
  31. Beaudoin AJ, Acharya A, Chen SR, Korzekwa DA, Stout MG, Acta Mater., 48, 3409 (2000)
  32. Beaudoin AJ, Acharya A, Mat. Sci. Eng. A, 309-310, 411 (2001)
  33. Wang Y, Kysar JW, Vukelic S, Yao YL, J. Manuf. Sci. Eng., 131, 041014 (2009)
  34. Bayley CJ, Brekelmans WA, Geers MGD, Phil. Mag., 87, 1361 (2007)
  35. Evans AG, Hutchinson JW, Acta Mater., 57, 1675 (2007)
  36. Wang H, Hwang KC, Huang Y, Wu PD, Liu B, Ravichandran G, Han CS, Gao H, Int. J. Plasticity, 23, 1540 (2007)
  37. Gerken JM, Dawson PR, J. Mech. Phys. Solids, 56, 1651 (2008)
  38. Ma A, Roters F, Raabe D, Acta Mater., 54, 2169 (2006)
  39. Borg U, Euro. J. Mech. A/Sol., 26, 313 (2006)
  40. Kuroda M, Tvergaard V, J. Mech. Phys. Solids, 54, 1789 (2006)
  41. Arsenlis A, Parks DM, Becker R, Bulatov VV, J. Mech. Phys. Solids, 52, 1213 (2004)
  42. Meissonnier FT, Busso EP, O’Dowd NP, Int. J. Plasticity, 17, 601 (2001)
  43. Cheong KS, Busso EP, Arsenlis A, Int. J. Plasticity, 21, 1797 (2005)
  44. Aoyagi Y, Shizawa K, Int. J. Plasticity, 23, 1022 (2007)
  45. Choi YS, Cho KM, Nam DG, Choi ID, Korean J. Mater. Res., 25(2), 81 (2015)
  46. Jung JH, Na YS, Cho KM, Dimiduk DM, Choi YS, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 46, 4834 (2015)
  47. Zhou Y, Neale KW, Toth LS, Int. J. Plasticity, 9, 961 (1993)
  48. Franciosi P, Zaoui A, Acta Metall., 30, 1627 (1982)
  49. Franciosi P, Zaoui A, Acta Metall., 30, 2141 (1982)
  50. Franciosi P, Berveiller M, Zaoui A, Acta Metall., 28, 273 (1980)
  51. Mecking H, Kocks UF, Acta Mater., 29, 173 (1981)
  52. Shanthraj P, Zikry MA, Acta Mater., 59, 7695 (2011)
  53. Anderson PM. Rice JR, Acta Metall., 33, 409 (1985)
  54. Peirce D, Shih CF, Needleman A, Compos. Struct., 18, 875 (1984)
  55. Peirce D, Asaro RJ, Needleman A, Acta Metall., 31, 1951 (1983)