광경화 3D 프린팅 공정을 위한 실리카 복합소재 합성 및 특성 분석

이진욱; 남산; 황광택; 김진호; 김응수; 한규성; Jin-Wook Lee; Sahn Nahm; Kwang-Taek Hwang; Jin-Ho Kim; Ung-Soo Kim; Kyu-Sung Han

Korean Journal of Materials Research, Vol.29, No.1, 23-29, January, 2019

DOI10.3740/MRSK.2019.29.1.23 Export Citation

광경화 3D 프린팅 공정을 위한 실리카 복합소재 합성 및 특성 분석

Synthesis and Characterization of Silica Composite for Digital Light Processing

이진욱^{1, 2}, 남산 ², 황광택¹, 김진호 ¹, 김응수¹, 한규성^{1, †}

¹한국세라믹기술원 도자세라믹센터
²고려대학교 신소재공학과

Jin-Wook Lee^{1, 2}, Sahn Nahm², Kwang-Taek Hwang¹, Jin-Ho Kim¹, Ung-Soo Kim¹, and Kyu-Sung Han^{1, †}

¹Ceramic ware Center, Korea Institute of Ceramic Engineering and Technology, Icheon 17303, Republic of Korea
²Department of Material Science and Engineering, Korea University, Seoul 02841, Republic of Korea

E-mail:

Three-dimensional(3D) printing is a process for producing complex-shaped 3D objects by repeatedly stacking thin layers according to digital information designed in 3D structures. 3D printing can be classified based on the method and material of additive manufacturing process. Among the various 3D printing methods, digital light processing is an additive manufacturing technique which can fabricate complex 3D structures with high accuracy. Recently, there have been many efforts to use ceramic material for an additive manufacturing process. Generally, ceramic material shows low processability due to its high hardness and strength. The introduction of additive manufacturing techniques into the fabrication of ceramics will improve the low processability and enable the fabrication of complex shapes and parts. In this study, we synthesize silica composite material that can be applied to digital light processing. The rheological and photopolymeric properties of the synthesized silica composite are investigated in detail. 3D objects are also successfully produced using the silica composite and digital light processing.

Keywords:3D printing;silica composite;digital light processing;photopolymerization;additive manufacturing

[References]

Dorre E, Hubner H, Mater. Des., 7, 278 (1986)
Janssen R, Scheppokat S, Claussen N, J. European Ceram. Soc., 28, 1369 (2008)
Ferrage L, Bertrand G, Lenormand P, Grossin D, Ben-Nissan B, J. Aust. Ceram. Soc., 53, 11 (2016)
He R, Liu W, Wu Z, An D, Huang M, Wu H, Jiang Q, Ji X, Wu S, Xie Z, Ceram. Int., 44, 3412 (2018)
Bae CJ, Halloran JW, Int. J. Appl. Ceram. Technol., 8, 1289 (2011)
Corcione C, Greco A, Montagna F, Licciulli A, Maffezzoli A, J. Mater. Sci., 40(18), 4899 (2005)
Brady GA, Halloran JW, Rapid Prototyp. J., 3, 61 (1997)
Griffith ML, Halloran W, J. Am. Ceram. Soc., 79, 2601 (1996)
Yun JS, Park TW, Jeong YH, Cho JH, Appl. Phys. A-Mater. Sci. Process., 122, 629 (2016)
Song SK, Kim JH, Hwang KS, Ha KR, Korean Chem., 49, 181 (2011)
Chen Z, Li D, Zhou W, Wang L, Proc IME B J Eng Manufact., 224, 641 (2010)
Hinczewski C, Corbel S, Chartier T, J. Eur. Ceram. Soc., 18, 583 (1998)
Wu KC, Halloran JW, J. Mater. Sci., 40(1), 71 (2005)
Chartier T, Badev A, Abouliatim Y, Lebaudy P, Lecamp L, J. Eur. Ceram. Soc., 32, 1625 (2012)
Cho JD, Ju HT, Hong JW, J. Polym. Sci. A: Polym. Chem., 43(3), 658 (2005)

[Related Articles]

[1] Dorre E, Hubner H, Mater. Des., 7, 278 (1986)

[2] Janssen R, Scheppokat S, Claussen N, J. European Ceram. Soc., 28, 1369 (2008)

[3] Ferrage L, Bertrand G, Lenormand P, Grossin D, Ben-Nissan B, J. Aust. Ceram. Soc., 53, 11 (2016)

[4] He R, Liu W, Wu Z, An D, Huang M, Wu H, Jiang Q, Ji X, Wu S, Xie Z, Ceram. Int., 44, 3412 (2018)

[5] Bae CJ, Halloran JW, Int. J. Appl. Ceram. Technol., 8, 1289 (2011)

[6] Corcione C, Greco A, Montagna F, Licciulli A, Maffezzoli A, J. Mater. Sci., 40(18), 4899 (2005)

[7] Brady GA, Halloran JW, Rapid Prototyp. J., 3, 61 (1997)

[8] Griffith ML, Halloran W, J. Am. Ceram. Soc., 79, 2601 (1996)

[9] Yun JS, Park TW, Jeong YH, Cho JH, Appl. Phys. A-Mater. Sci. Process., 122, 629 (2016)

[10] Song SK, Kim JH, Hwang KS, Ha KR, Korean Chem., 49, 181 (2011)

[11] Chen Z, Li D, Zhou W, Wang L, Proc IME B J Eng Manufact., 224, 641 (2010)

[12] Hinczewski C, Corbel S, Chartier T, J. Eur. Ceram. Soc., 18, 583 (1998)

[13] Wu KC, Halloran JW, J. Mater. Sci., 40(1), 71 (2005)

[14] Chartier T, Badev A, Abouliatim Y, Lebaudy P, Lecamp L, J. Eur. Ceram. Soc., 32, 1625 (2012)

[15] Cho JD, Ju HT, Hong JW, J. Polym. Sci. A: Polym. Chem., 43(3), 658 (2005)