A mono-block-layer build solid oxide fuel cell model (MOLB type SOFC) is established, which takes into account the contact resistance at the electrode/interconnector interface due to the produce of the oxide scale. The influence of structure parameter on the MOLB type SOFC performance is investigated, which includes that the anode thickness, cathode thickness, the anode/interconnector interface width, the cathode/interconnector interface width, the channel height, anode porosity and cathode porosity. Although most re- searchers reported that the performance of MOLB type SOFC was superior to that of planar type SOFC, this work revealed that at the condition of the lower cathode thickness (<100 mu m), the MOLB type SOFC performance was worse than that of the planar type SOFC. Moreover, for the MOLB type SOFC, the power density per unit area slightly rises with the increase of channel height, but the power density per unit volume sorely drops with the increase of channel height. Consequently, the structure parameters of the MOLB type SOFC affect the cell performance significantly. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.