Journal of Industrial and Engineering Chemistry, Vol.94, 105-121, February, 2021
Research Progress of Interface Conditions and Tribological Reactions: A Review
E-mail:
Tribology plays a crucial role in progress of industry and engineering. The dependence of interface conditions and interfacial reactions provides the strategies for friction reduction as well as anti-wear in industrial processes. That is to modify the surface structure of materials or tune the properties of lubricants. This review provides an overview on the important interface conditions and surface-induced tribological reactions with emphasis on the underlying of their formation and action mechanism. The tribological features of asperity, debris and surface texture are firstly dictated. Then the main surface-induced physicochemical reactions including wetting/dewetting, deposition/adsorption are discussed. In particular, the thermal, mechanical and electrical effects that trigger tribochemical reactions are also addressed. Finally, some deficiencies in related investigations are summarized, with perspectives for the development of tribology in both science research and industrial application.
- Vakis AI, Yastrebov VA, Scheibert J, Nicola L, Dini D, Minfray C, et al., Tribol. Int., 125, 169 (2018)
- Ranjan P, Hiremath SS, J. Manuf. Process., 43, 47 (2019)
- Minato T, Abe T, Prog. Surf. Sci., 92, 240 (2017)
- Sun HY, Yang ZQ, Pu YN, Dou WW, Wang CY, Wang WH, Hao XP, Chen SG, Shao Q, Dong MY, Wu SD, Ding T, Guo ZH, J. Colloid Interface Sci., 547, 40 (2019)
- Wijshoff H, Curr. Opin. Colloid Interface Sci., 36, 20 (2018)
- Fletcher DI, Kapoor A, Steinhoff K, Schuleit N, P. I. Mech. Eng. J-J. Eng., 214, 597 (2000)
- Kang Z, Fu Y, Chen Y, Ji J, Fu H, Wang S, Li R, Int. J. Pr. Eng. Man-Gt., 5, 583 (2018)
- Mezghani S, Demirci I, Zahouani H, El Mansori M, Precis. Eng., 36, 210 (2012)
- Keller J, Fridrici V, Kapsa P, Huard JF, Tribol. Int., 42, 1011 (2009)
- Scaraggi M, Mezzapesa FP, Carbone G, Ancona A, Sorgente D, Lugara PM, Tribol. Int., 75, 123 (2014)
- Lu H, Ren S, Zhang P, Guo J, Li J, Dong G, RSC Adv., 7, 21600 (2017)
- Wu Y, Wei Q, Cai M, Zhou F, Adv. Mater. Interfaces., 2, 140039 (2014)
- Li ZX, Dolocan A, Morales-Collazo O, Sadowski JT, Celio H, Chrostowski R, Brennecke JF, Mangolini F, Adv. Mater. Interfaces, 2000426 (2020).
- Wu XH, GongKL, Zhao GQ, Lou WJ, Wang XB, Liu WM, RSC Adv., 8, 4595 (2018)
- Kong LH, Sun JL, Bao YY, RSC Adv., 7, 12599 (2017)
- Kim JW, Nam J, Lee SW, J. Manuf. Process., 43, 46 (2019)
- Zou L, Li H, Yang YG, Huang Y, Mater. Manuf. Process., 35, 961 (2020)
- Puliti G, Paolucci S, Sen M, Appl. Mech. Rev., 64, 1002 (2011)
- Shafi WK, Charoo MS, Tribology.Materials, Surfaces & Interfaces, 1 (2020).
- Ye C, Liu W, Chen Y, Yu L, Si N, Chem. Commun., 21, 2244 (2001)
- Thomas TR, Physics Bulletin, 33, 326 (1982)
- Barber JR, P. Roy, Soc. A-math. Phy., 459, 53 (2003)
- Sackfield A, Hills DA, Qiu H, Int. J. Mech. Sci., 49, 567 (2007)
- Flicek RC, Hills DA, Dini D, Int. J. Fatigue., 71, 26 (2015)
- Dini D, Hills DA, European Journal of Mechanics-A/Solids, 22, 851 (2003).
- Aghababaei R, Warner DH, Molinari JF, Nat. Commun., 7, 11816 (2016)
- Greenwood JA, Williamson JBP, Proc. R. Soc. A, 295, 300 (1966)
- Rosen BG, Thomas T, Int. J. Mach. Tool. Manu., 41, 2061 (2001)
- Srivastava VC, Rudrakshi GB, Uhlenwinkel V, Ojha SN, J. Mater. Sci., 44, 2288 (2008)
- Yang YJ, Shi YF, Friction, 6, 316 (2018)
- Yang YJ, Huang LP, Shi YF, Wear, 352-353, 31 (2016)
- Valerio C, Marco P, Jose R, Int. J. Fract., 215, 39 (2019)
- Keller J, Fridrici V, Kapsa P, Vidaller S, Huard JF, Tribol. T., 52, 121 (2008)
- Zeman KP, Coffin LF, ASLE Trans., 3, 191 (1960)
- Williams JA, Tribol. Int., 38, 863 (2005)
- Rabinowicz E, Wear, 100, 533 (1984)
- Archard JF, Hirst W, Proc. R. Sot. London, Ser. A, 236, 397 (1956)
- Peterson MB, Florek JJ, Lee RE, ASLE Trans., 3, 101 (1960)
- Wang Y, Rainforth WM, Jones H, Lieblich M, Wear, 251, 1421 (2001)
- Bhushan B, Principles and applications of tribology, second ed., A John Wiley & Sons Ltd., New York, 2013.
- Li A, Szlufarska I, Phys. Rev. B., 92, 075418 (2015)
- Gnecco E, Bennewitz R, Meyer E, Phys. Rev. Lett., 88, 215501 (2002)
- Deshpande VS, Needleman A, Van der Giessen E, Acta Mater., 52, 3135 (2004)
- Kobe KA, J. Chem. Educ., 28, 230 (1951)
- Zhang B, Wang J, Wu B, Guo XW, Wang YJ, Chen D, Zhang YC, Du K, Oguzie EE, Ma XL, Nat. Commun, 9, 2559 (2018)
- Quinn TFJ, Tribol. Int., 16, 257 (1983)
- Olver AV, Mech PI, Eng. J-J. Eng, 219, 313 (2005)
- Moshkovich A, Perfilyev V, Lapsker I, Rapoport L, Tribol. Lett., 37, 645 (2010)
- Azushima A, Kopp R, Korhonen A, Yang DY, Micari F, Lahoti GD, Groche P, Yanagimoto J, Tsuji N, Rosochowski A, Yanagida A, Ann-Manuf CIRP, Techn., 57, 716 (2008)
- Klaffke D, Tribotest J., 6, 373 (2000)
- Brockley CA, Fleming GK, Wear, 8, 374 (1965)
- Mantyranta A, Heino V, Isotahdon E, Salminen T, Huttunen-Saarivirta E, Tribol. Int., 138, 250 (2019)
- Shen MX, Dong F, Zhang ZX, Meng XK, Peng XD, Tribol. Int., 103, 1 (2016)
- Garcia C, Lotz T, Martinez M, Int. J. Fatigue., 87, 326 (2016)
- Larue JE, Daniewicz SR, Int. J. Fatigue, 29, 508 (2007)
- Sun H, Zhou Y, Liao X, Li A, Surf. Topogr-Metrol., 7, 035012 (2019)
- Wang L, Tang XJ, Wang LY, Yang NJ, Chen XH, Li P, Liu G, Liu GH, Mater. Manuf. Process., 34, 1143 (2019)
- Tang HJ, Sun JL, Zhao ZL, He JQ, Surf. Topogr-Metrol., 8, 025034 (2020)
- Sadeler R, Atasoy S, Fatigue Fract. Eng. Mater. Struct., 39, 502 (2016)
- Volker L, Michael J, Chalid ED, Int. J. Fatigue., 39, 61 (2012)
- Way S, J. Appl. Mech., 2, 49 (1935)
- Loroesch HK, Lubr. Eng., 41, 37 (1985)
- Leng X, Chen Q, Shao E, Wear, 122, 33 (1988)
- Sundaram NK, Guo Y, Chandrasekar S, Phys. Rev. Lett., 109, 106001 (2012)
- Leo KSP, Avinash D, Mater. Manuf. Process., 35, 869 (2020)
- Muro H, Tsushima T, Nagafuchi M, Wear, 35, 261 (1975)
- Aghababaei R, Budzik MK, Extreme. Mech. Lett., 35, 100644 (2020)
- Ellyin F, Fatigue damage, crack growth and life prediction, first ed., Chapman & Hall, 1997.
- Thuong NV, Zuhailawati H, Seman AA, Huy TD, Dhindaw BK, Mater. Des., 67, 448 (2015)
- Hong W, Cai W, Wang S, Tomovic MM, Chinese J. Aeronaut., 31, 867 (2018)
- Varenberg M, Halperin G, Etsion I, Wear, 252, 902 (2002)
- Waterhouse RB, Fretting Corrosion, Pergamon Press, Oxford, 1972.
- Labiapari WD, de Alcantara CM, Costa HL, De Mello JDB, J. Mater. Process. Technol., 223, 164 (2015)
- Webster MN, Norbart CJJ, Tribol. T., 38, 883 (1995)
- Olver VA, Wear of hard steel in lubricated, rolling contact, Imperial College London, 1986.
- Winter H, Oster P, Gear Technology, 7, 16 (1990)
- Jacobs TDB, Carpick RW, Nat. Nanotechnol., 8(2), 108 (2013)
- Tjong SC, Lau KC, Mater. Sci. Technol., 16, 99 (2000)
- Purcek G, Savaskan T, Kucukomeroglu T, Murphy S, Wear, 252, 894 (2002)
- Archard JF, J. Appl. Phys., 24, 981 (1953)
- Gotsmann B, Lantz MA, Phys. Rev. Lett., 101, 125501 (2008)
- Maw W, Stevens F, Langford SC, Dickinson JT, J. Appl. Phys., 92, 5103 (2002)
- Chung KH, Kim DE, Tribol. Lett., 15, 135 (2003)
- Bhaskaran H, Gotsmann B, Sebastian A, Drechsler U, Lantz MA, Despont M, Jaroenapibal P, Carpick RW, Chen Y, Sridharan K, Nat. Nanotechnol., 5(3), 181 (2010)
- Aghababaei R, Warner DH, Molinari JF, 114, 7935 (2017).
- Sha ZD, Sorkin V, Branicio PS, Pei QX, Zhang YW, Srolovitz DJ, Appl. Phys. Lett., 103, 073118 (2013)
- Zhou Y, Leonard DN, Guo W, Qu J, Sci. Rep. U. K., 7, 8426 (2017)
- Hutchings IM, Shipway PH, Tribology: Friction and Wear of Engineering Materials, second ed., Btterworth-Heinemann, Oxford, 1992.
- Sun JL, Zhang BT, Dong C, Wear, 376-377, 869 (2017)
- Arcifa A, Rossi A, Ramakrishna SN, Espinosa-Marzal R, Sheehan A, Spencer ND, J. Phys. Chem. C., 122, 7331 (2018)
- Pettersson U, Jacobson S, Tribol. Int., 36, 857 (2003)
- Neves D, Diniz AE, de Lima MSF, J. Mater. Process. Tech., 179, 139 (2006)
- Wei Y, Kim MR, Lee DW, Park C, Park SS, Int. J. Pr. Eng. Man-Gt., 4, 141 (2017)
- Horng JH, ASME. J. Tribol., 120, 829 (1998)
- Krupka I, Svoboda P, Hartl M, Tribol. Int., 43, 1035 (2010)
- Sivaiah P, Kumar GVA, Singh MM, Kumar H, Mater. Manuf. Process., 35, 61 (2019)
- Zhang YY, Wang XL, Li HQ, Wang B, Appl. Surf. Sci., 329, 174 (2015)
- Moronuki N, Furukawa Y, CIRP Ann-Manuf. Techn., 52, 471 (2003)
- Pettersson U, Jacobson S, Tribol. Lett., 17, 553 (2004)
- Yuan S, Huang W, Wang X, Tribol. Int., 44, 1047 (2011)
- Manikandan N, Arulkirubakaran D, Palanisamy D, Raju R, Mater. Manuf. Process., 34, 103 (2018)
- Sharma V, Pandey PM, Mater. Manuf. Process, 31, 1904 (2015)
- Blatter A, Maillat M, Pimenov S, Shafeev G, Simakin A, Loubnin E, Wear, 232, 226 (1999)
- Costa HL, Hutchings IM, J. Mater. Process. Technol., 209, 1175 (2009)
- Tomanik E, Tribol. Int., 59, 90 (2013)
- Mishra P, Ramkumar P, Tribology - Materials, Surfaces & Interfaces, 62, 67 (2019).
- Ferreira R, Martins J, Carvalho O, Sobral L, Carvalho S, Silva F, Mater. Manuf. Process., 35, 498 (2019)
- Shen C, Khonsari MM, Tribol. Int., 101, 273 (2016)
- Kang ZY, Fu YH, Ji JH, Tian L, ASME. J. Tribol., 139, 054502 (2017)
- Gajrani KK, Reddy RPK, Sankar MR, Int. J. Mach. Machinabil. Mater., 18, 522 (2016)
- Quere D, Physica A, 313, 32 (2002)
- Bico J, Tordeux C, Quere D, Europhys. Lett., 55, 214 (2001)
- Wenzel RN, Ind. Eng. Chem. Res., 28, 988 (1936)
- Mortazavi V, Hejazi V, Souza RMD, Nosonovsky M, Advances in Contact Angle, Wettability and Adhesion 1, 19 (2013).
- Netz RR, Andelman D, Phys. Rev. E, 55, 687 (1997)
- Kim YH, Choi W, Lee JS, Microfluid. Nanofluid., 10, 173 (2011)
- Hutt W, Persson BNJ, J. Chem. Phys., 144, 124903 (2016)
- Roberts AD, Tabor D, Proc. R. Soc. London, Ser. A, 325, 323 (1971)
- Nanjundiah K, Hsu PY, Dhinojwala A, J. Chem. Phys., 130, 024702 (2009)
- Han M, Espinosa-Marzal RM, J. Chem. Phys. C., 122, 21344 (2018)
- Perkin S, Phys. Chem. Chem. Phys., 14, 5052 (2012)
- Bhattacharya A, Singh T, Singh AP, Singh R, Verma VK, Lubr. Sci., 7, 61 (1994)
- Xiong X, Sun JL, Xu YD, Li Y, Tribol. T., 59, 421 (2016)
- Furlong OJ, Miller BP, Kotvis P, Tysoe WT, ACS Appl. Mater. Inter., 3, 795 (2011)
- Gao F, Furlong O, Kotvis PV, Tysoe WT, Tribol. Lett., 20, 171 (2005)
- Tang HJ, Sun JL, Yan XD, Wu P, RSC Adv., 9, 34617 (2019)
- Lara J, Surerus K, Kotvis P, Contreras M, Rico J, Tysoe W, Wear, 239, 77 (2000)
- Boldyrev VV, Tkacova K, Journal of Materials Synthesis and Processing 8, 12 (2000).
- Reddy MS, Sharma N, Agarwal AK, Renew. Energy, 99, 1008 (2016)
- Tang HJ, Sun JL, Zhao ZL, Han Z, ASME. J. Tribol., 021901 (2021).
- Xiong S, Sun JL, Jiang W, Xu Y, Zeng YF, Xia L, China. Pet. Process. Pe., 16, 96 (2014)
- Manimunda P, Al-Azizi A, Kim SH, Chromik RR, ACS Appl. Mater. Inter., 9, 16704 (2017)
- Gong ZB, Jia XL, Ma W, Zhang B, Zhang JY, Appl. Surf. Sci., 413, 381 (2017)
- Zhao Q, Shen Y, Ji M, Zhang L, Jiang T, Li C, J. Ind. Eng. Chem., 20(2), 544 (2014)
- Kogovsek J, Kalin M, Tribol. Lett., 53, 585 (2014)
- Zhang LL, Tu JP, Wu HM, Yang YZ, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 454, 487 (2007)
- Du SN, Sun JL, Wu P, Carbon, 140, 338 (2018)
- Sun JL, Du SN, RSC Adv., 9, 40642 (2019)
- Lei Y, Jiang J, Bi T, Du J, Pang X, RSC Adv., 8, 22113 (2018)
- Mishra KK, Panda K, Kumar N, Malpani D, Ravindran TR, Khatri OP, J. Ind. Eng. Chem., 61, 97 (2018)
- Hu C, Yi C, Bai M, Lv J, Tang D, RSC Adv., 10, 17418 (2020)
- Chen BB, Li XF, Li X, Yang J, Peng WX, Dong JZ, Li CS, Song HJ, RSC Adv., 6, 60446 (2016)
- Dai W, Kheireddin B, Gao H, Liang H, Tribol. Int., 102, 88 (2016)
- Gulzar M, Masjuki HH, Kalam MA, Varman M, Zulkifli NWM, Mufti RA, Zahid R, J. Nanopart. Res., 18, 223 (2016)
- Luo T, Wei X, Zhao H, Cai G, Zheng X, Ceram. Int., 40, 10103 (2014)
- Khadem M, Penkov OV, Pukha VE, Maleyev MV, Kim DE, RSC Adv., 6, 56918 (2016)
- Ma J, Mo Y, Bai M, Wear, 266, 627 (2009)
- Flores-Castaneda M, Camps E, Camacho-Lopez M, Muhl S, Garcia E, Figueroa M, J. Alloy. Compd., 643, S67 (2015)
- Moshkovith A, Perfiliev V, Lapsker I, Fleischer N, Tenne R, Rapoport L, Tribol. Lett., 24, 225 (2006)
- Shi MS, Solid lubricating materials, China Chemical Industry Press, Beijing, 2000.
- Deng JX, Wu Z, Lian YS, Qi T, Cheng J, Int. J. Refract. Met. H., 30, 164 (2012)
- Zhang YY, Zhang YJ, Zhang SM, Yang GB, Gao CP, Zhou CH, Zhang CL, Zhang PY, Tribol. Int., 141, 105890 (2019)
- Kong LH, Sun JL, Bao YY, Meng Y, Wear, 376, 786 (2017)
- Matar OK, Craster RV, Sefiane K, Phys. Rev. E, 76, 056315 (2007)
- Chengara A, Nikolov AD, Wasan DT, Trokhymchuk A, Henderson D, J. Colloid Interface Sci., 280(1), 192 (2004)
- Sharma AK, Tiwari AK, Singh RK, Dixit AR, Mater. Today: Proc., 3, 2155 (2016)
- Amrita M, Srikant RR, Sitaramaraju AV, Mater. Manuf. Process., 29, 600 (2014)
- Saidur R, Leong KY, Mohammad HA, Renew. Sust. Energ. Rev., 15, 1646 (2011)
- Sharma AK, Tiwari AK, Dixit AR, Mater. Manuf. Process., 30, 813 (2014)
- He JQ, Sun JL, Meng YN, Pei Y, J. Manuf. Process, 57, 312 (2020)
- Qi S, Geng Z, Lu Z, Zhang G, Wu Z, Adv. Mater. Interfaces., 7, 190189 (2020)
- Hou KM, Yang SR, Liu XH, Wang JQ, Adv. Mater. Interfaces., 5, 170168 (2018)
- Srinivas V, Thakur RN, Jain AK, Tribol. T., 60, 12 (2016)
- Rahmati B, Sarhan AAD, Sayuti M, J. Clean Prod., 66, 685 (2014)
- Yu HL, Xu Y, Shi PJ, Xu BS, Wang XL, Liu Q, Nonferr T, Metal. Soc., 18, 636 (2008)
- Choi Y, Lee C, Hwang Y, Park M, Lee J, Choi C, Jung M, Curr. Appl. Phys., 9(2), e124 (2009)
- Ye WY, Cheng TF, Ye Q, Guo XY, Zhang ZJ, Dang HX, Mat. Sci. Eng. A-Struct., 359, 82 (2003)
- Sia SY, Sarhan AAD, Int. J. Adv. Manuf. Tech., 70, 1063 (2013)
- Sayuti M, Sarhan AAD, Salem F, J. Clean Prod., 67, 265 (2014)
- Lee CG, Hwang YJ, Choi YM, Lee JK, Choi C, Oh JM, Int. J. Precis. Eng. Man., 10, 85 (2009)
- Lahouij I, Vacher B, Martin JM, Dassenoy F, Wear, 296, 558 (2012)
- Ettefaghi E, Ahmadi H, Rashidi A, Mohtasebi SS, Int. J. Precis. Eng. Man., 14, 805 (2013)
- Liu G, Li X, Lu N, Fan R, Tribol. Lett., 18, 85 (2005)
- Padgurskas J, Rukuiza R, Prosycevas I, Kreivaitis R, Tribol. Int., 60, 224 (2013)
- Demas NG, Timofeeva EV, Routbort JL, Fenske GR, Tribol. Lett., 47, 91 (2012)
- Alves SM, Barros BS, Trajano MF, Ribeiro KSB, Moura E, Tribol. Int., 65, 28 (2013)
- Wu YY, Tsui WC, Liu TC, Wear, 262, 819 (2007)
- Prabu L, Saravanakumar N, Rajaram G, Tribol. Ind., 40, 440 (2018)
- Amiri M, Khonsari MM, Entropy-Switz, 12, 1021 (2010)
- Tromborg J, Scheibert J, Amundsen DS, Thogersen K, Malthe-Sorenssen A, Phys. Rev. Lett., 107, 074301 (2011)
- Rosen BM, Percec V, 446, 381 (2007).
- Craig SL, Nature, 487, 176 (2012)
- Xie GX, Guo D, Luo JB, Tribol. Int., 84, 22 (2015)
- Jiang Z, Fang J, Chen F, Chen B, Gu K, Ind. Lubr. Tribol., 70, 878 (2018)
- Bowden FP, Tabor D, The friction and lubrication of solids, Oxford university press, 2001.
- Rice JR, Geophys J, Res. B. Sol. Ea., 111, B5 (2006)
- Goldsby DL, Tullis TE, Science, 334(6053), 216 (2011)
- Bowden FP, Ridler KEW, Proc. R. Soc. London, Ser. A, 154, 640 (1936)
- Furlong O, Miller B, Kotvis P, Adams H, Tysoe WT, RSC Adv., 4, 24059 (2014)
- Gosvami NN, Bares JA, Mangolini F, Konicek AR, Yablon DG, Carpick RW, Science, 348(6230), 102 (2015)
- Crobu M, Rossi A, Spencer ND, Tribol. Lett., 48, 393 (2012)
- Berkani S, Dassenoy F, Minfray C, Belin M, Vacher B, Martin JM, Cardon H, Montagnac G, Reynard B, Tribol. Int., 79, 197 (2014)
- Cabrera N, Mott NF, Rep. Prog. Phys., 12, 163 (1949)
- Spikes H, Tysoe W, Tribol. Lett., 59, 21 (2015)
- Prandtl L, ZAMM - Journal of Applied Mathematics and Mechanics, 8, 85 (1928).
- Eyring H, J. Chem. Phys., 4, 283 (1936)
- Rigney D, Karthikeyan S, Tribol. Lett., 39, 3 (2010)
- Furlong OJ, Miller BP, Tysoe WT, Tribol. Lett., 41, 257 (2010)
- Furlong OJ, Miller BP, Li ZJ, Walker J, Burkholder L, Tysoe WT, Langmuir, 26(21), 16375 (2010)
- Cooper PK, Staddon J, Zhang S, Aman ZM, Atkin R, Li H, Front. Chem., 7, 287 (2019)