The collapse mechanism of microparticulate Langmuir films was studied experimentally in the present work. Using a Wilhelmy film balance, surface pressure vs area isotherms were determined, and the particle removal during the compression was examined by video-microscope and by naked eye. Upon compressing partially wettable 75 Am diameter surface modified glass beads at liquid ( water or aqueous surfactant solution)-air ( or n-octane) interfaces, different collapse mechanisms were visualized depending on the wettability of the particles. At low contact angles ( below 40) irreversible particle removal was observed as a consequence of a particulate line-by-line collapse mechanism. At higher contact angles a buckling-type collapse mechanism was revealed without particle removal from the liquid interface. In the case of irreversible particle removal we assessed the contact angles from the nondissipative part of the isotherm. These values were found to be in reasonable agreement with those determined directly on the beads.