화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Clean Technology, Vol.15, No.2, 102-108, June, 2009
Export Citation
반응압출 공정으로 개질된 PLA 나노복합체의 유변학적 및 열적 물성
Rheological and Thermal Properties of PLA Nano-composite Modified by Reactive Extrusion
강경수, 김봉식, 신부영†
  • 영남대학교 디스플레이화공학부, 712-749 경북 경산시 대동 214-1
Gyeoung Soo Kang, Bong Shik Kim, and Boo Young Shin†
  • School of Display and Chemical Engineering, Yeungnam University, 214-1 Dae-dong, Gyeongsan City, Gyeongbuk 712-749, Korea
E-mail:
초록
본 연구에서는 폴리락틱산 (PIA)의 용융강도를 향상시키기 위하여 몬모릴로나이트 (MMT), 기능성 단량체 인 글리시딜 메타크릴레이트 (GMA)와 반응개시제를 함유한 PLA를 이축압출기로 개질한 후 열적 특성과 및 유변학적 특성을 조사하였으며, X선 회절장치 (XRD) 및 투과전자현미경 (TEM) 사진을 이용하여 MMT의 분산도를 측정하였다. 이 나노복합체의 Tg는 GMA 함량이 증가하면 감소하는 경향을 보였으나, MMT의 양에는 크게 영향을 받지 않았다. 또한 표면분석에 의해 MMT의 양이 증가할수록 박리형 (exfoliation) 보다는 삽입형 (intercalation) 에 가까운 나노복합체가 형성된 것을 확인하였다. 복합점도 및 저장탄성률은 MMT의 첨가에 의해 크게 증가되었다.
In this study, poly(lactic acid) (PLA) was modified by reactive extrusion with a functional monomer GMA(glycidyl methacrylate), MMT(montmorillonite), and initiator to enhance the melt strength. Each modified PLA was prepared with different amounts of GMA and MMT and was characterized by measuring thennal- and melt-viscoelastic properties. The degree of dispersion of MMT was measured by X-ray diffraction(XRD) and transmission electron microscopy(TEM). The glass transition temperature(Tg) of modified PLA-GMA-MMT nanocomposite decreased with increasing GMA content, but was a little affected by the amount of MMT. Surface analysis showed that the nanocomposite became more intercalated than exfoliated as the amount of MMT increases. The complex viscosity and storage modulus ofthe nano-composite were greatly increased by addition of MMT.
Keywords:Poly(lactic acid);Thennal property;Functional monomer;Montmorillonite;Complex viscosity
  1. Narayan R, "Biobased &Biodegradable Polymer Materials: Rationale, Drivers, and Technology Examples," in Degradable Polymers and Materials: Principles and Practice, ACS Symposirun Series 939, American Chemical Society, Washingon, DC, Chapter 5 (2006)
  2. Auras R, Harte B, Selke S, Macromol. Biosci., 4, 835 (2004)
  3. Lee JR, Chun SW, Kang HJ, Polym.(Korea), 27(4), 285 (2003)
  4. Carlson D, Dubois P, Nie L, Narayan R, Polym. Eng. Sci., 38(2), 311 (1998)
  5. Ray SS, Okamoto M, Macromol. Rapid Commun., 24(14), 815 (2003)
  6. Di YW, Iannace S, Di Maio E, Nicolais L, J. Polym. Sci. B: Polym. Phys., 43(6), 689 (2005)
  7. Di Y, lannace S, Maio ED, Nicolaice L, Macromol. Mater. Eng., 290, 1083 (2005)
  8. Kim ES, Kim BC, Kim SH, J. Polym. Sci. B: Polym. Phys., 42(6), 939 (2004)
  9. Gupta MC, Deshmukh VG, Polymer, 24, 827 (1983)
  10. Di YW, Iannace S, Di Maio E, Nicolais L, J. Polym. Sci. B: Polym. Phys., 43(6), 689 (2005)
  11. Chae HG, Kim BC, Im SS, Han YK, Polym. Eng. Sci., 41(7), 1133 (2001)
  12. Park JW, Im SS, Kim SH, Kim YH, Polym. Eng. Sci., 40(12), 2539 (2000)
  13. Zilg C, Mulhaupt R, Finter J, Macromolecular Chem & Phys., 200, 661 (1999)
  14. Messersmith PB, Giannelis EP, J. Polym. Sci. A: Polym. Chem., 33(7), 1047 (1995)
  15. Lyu SG, Park DY, Bae KS, Sur GS, Polym.(Korea), 25(3), 421 (2001)
  16. Meister JJ, Marcell Dekker, Inc., New York (2000)
  17. Zhang GS, Yan DY, J. Appl. Polym. Sci., 88(9), 2181 (2003)
  18. Jang WY, Hong KH, Cho BH, Jang SH, Lee SI, Kim BS, Shin BY, Polym.(Korea), 32(2), 116 (2008)
  19. Lim ST, Lee CH, Choi HJ, Jhon MS, J. Polym. Sci. B: Polym. Phys., 41(17), 2052 (2003)
  20. Yang HH, Han CD, Kim JK, Polymer, 35(7), 1503 (1994)
  21. Han CD, Jhon MS, J. Appl. Polym. Sci., 32, 3809 (1986)
  22. Sodergard A, Niemi M, Selin JF, Nasman JH, Ind. Eng. Chem. Res., 34(4), 1203 (1995)