화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Clean Technology, Vol.17, No.4, 314-324, December, 2011
Export Citation
숙신산 알킬 하프-아마이드 유도체의 합성 및 해수에 대한 방청성능
Synthesis and Anti-corrosion Properties of Succinic Acid Alkyl Half-amide Derivatives
백승엽, 김영운†, 정근우, 유승현, 김남균
  • 한국화학연구원 그린화학연구단 산업바이오화학연구센터, 305-600 대전광역시 유성구 가정로 141
Seung-Yeob Baek, Young-Wun Kim†, Keun-Wo Chung, Seung-Hyun Yoo, and Nam-Kyun Kim
  • Green Chemistry Research Division, Surfactant & Lubricant Research Team, KRICT, Yuseong Gu, Daejeon 305-600, Korea
E-mail:
초록
아마이드 유도체는 방청성능 및 윤활성능이 우수하여 금속가공유 및 유압작동유등의 첨가제로 많이 사용되고 있다. 본 연구에서는 광유계 윤활기유의 방청제로 사용하기 위하여 알킬 무수 숙신산과 여러 가지 아민과의 링개환 반응을 행하여 카르복실 그룹과 아마이드 그룹을 동시에 포함하는 숙신산 알킬 하프-아마이드 유도체들을 97% 이상의 수율로 합성하였으며 합성구조에 따라 1 중량% 농도범위에서 광유계 오일에 용해되었다. 합성 유도체의 구조는 1H-NMR 및 FT-IR 스펙트럼으로 행하였으며 GC 크로마토그램을 통하여 화합물의 순도를 확인하였다. 또한, 합성 유도체의 해수에 대한 방청성능을 ASTM D665 표준방법과 무게 중량법으로 평가한 결과, 합성 유도체의 농도가 증가하고 알킬기의 사슬이 짧고 2차 아민으로 합성한 숙신산 알킬 하프-아마이드의 방청성능이 1차 아민으로 합성한 유도체보다 상대적으로 방청성능이 우수하였다. 무게 중량법으로 평가한 방청효율% (IE%)는 알킬기의 사슬이 짧을수록 우수한 방청효율을 나타내었으며 구조에 따라 방청효율에 차이를 나타내었다. 40 ppm 농도를 첨가한 오일의 IE%는 최고 93% 이상이었다. 또한, 발청속도(Corrosion rate, CR)는 알킬기의 사슬이 짧을수록 낮은 값을 나타내어 합성 유도체 40 ppm 농도를 첨가한 오일의 CR 값은 최고 0.5 mm/year 이하로 나 타났다.
Several amide derivatives have been used as additives for base oil of metal working fluids and pressure working oils. In this paper, a series of succinic acid alkyl half-amide derivatives were synthesized as over 97% yields by ring-opening reaction of succinic anhydride and several amines and were soluble in 100 N base oil within 1 wt% concentration. The structures of the synthesized amides were confirmed by 1H-NMR, FT-IR spectrum and GC analysis. Anti-corrosion properties of the amides in sea water were evaluated through ASTM D665 method and weight loss method. As the results of anti-corrosion properties, the properties of the amides with shorter alkyl chain and high concentration showed better performance than those with longer alkyl chain and low concentration. Also, the dialkyl amides showed better anti-corrosion properties than those of the monoalkyl amides. Inhibition efficiency% (IE%) was over 93% in the concentration of 40 ppm and corrosion rate (CR) was below 0.5mm/year in the same concentration.
Keywords:Anti-corrosion properties;Succinic acid alkyl half-amides;IE%;CR
  1. C. A. Houston & Associates, Inc, Mckinsey report, “Agglomerations," The International Detergent Newsletter July/Aug (2008)
  2. Leggett J, “Half Gone: Oil, Gas, Hot Air and the Global Energy Crisis,” Portobello Books, London (2005)
  3. Meadows D, “The Limits to Growth: the 30-year Update,” Chelsea Green (2004)
  4. Kim BJ et al., J. Adhesion and Interface., 11(2), 76 (2010)
  5. Afton Chemical Corp., “Emulsifier/Demulsifier System,” KRA-1020060048672 (2006)
  6. Ciba Holding Inc., “Succinic Acid Semi-amides as Anti-corrosive Agents,” KR-A-1020050046781 (2005)
  7. Robson and Robert, “Ester-free Synthetic Lubricating Oils Comprising Polybutenyl Substituted Succinic Acid or Anhydride and Hydrocarbon Polymer,” U. S. Patent No. 5,972,852 (1999)
  8. Anderson et al., “Succinic Acid Derivatives and their Use as Surfactants,” U.S. Patent No. 5,798,331 (1998)
  9. Ethyl Corp., “Lubricant Compositions of Enhanced Performance Capabilities,” KR-A-1019960010840 (1996)
  10. Hotten B, “Rust Inhibiting Lubrication Oil Additives,” U.S. Patent No. 3,785,981 (1974)
  11. Maurits Krukziener, “Lubricating Oil Composition,” U.S. Patent No. 3,331,776 (1967)
  12. Saji VS, Recent Pat. Corros. Sci., 2, 6 (2010)
  13. Auinat M, Ein-Eli Y, J. Electrochem. Soc., 152(6), A1158 (2005)
  14. Dickie, Ray A, Floyd, Louis F, “Polymeric Materials for Corrosion Control: An Overview,” ACS Symposium Series; American Chemical Society: Washington, DC, 1 (1986)
  15. Garrecht et al., “Alkyl or Alkenyl Succinic Acids as Corrosion Inhibitors for Oxygenated Fuels,” U. S. Patent No. 5,080,686 (1992)
  16. Rao BVA, Iqbal MY, Sreedhar B, Electrochim. Acta, 55(3), 620 (2010)
  17. Alvarez-Bustamante R, Negron-Silva G, Abreu-Quijano M, Herrera-Hernandez H, Romero-Romo M, Cuan A, Palomar-Pardave M, Electrochim. Acta, 54(23), 5393 (2009)
  18. Rostamizadeh S, et al, Monatshchem., 139, 1241 (2008)
  19. Ashassi-Sorkhabi H, Shaabani B, Seifzadeh D, Electrochim. Acta, 50(16-17), 3446 (2005)
  20. Yildirim A, Cetin M, Corros. Sci., 50, 155 (2008)
  21. Quraishi MA, Ansari FA, J. Appl. Electrochem., 36(3), 309 (2006)
  22. Ali SA, et al., Corros. Sci., 47, 2659 (2005)
  23. Li P, Lin JY, Tan KL, Lee JY, Electrochim. Acta, 42(4), 605 (1997)
  24. Koek MM et al., Anal. Chem., 82, 156 (2010)
  25. Niknam K et al., Can. J. Chem., 88, 164 (2010)
  26. American Society for Testing and Materials, ASTM Designation, D665-98, Philadelphia (2000)
  27. Khaled KF, Electrochim. Acta, 54(18), 4345 (2009)
  28. Quraishi MA, Jamal D, J. Am. Oil Chem. Soc., 77, 1107 (2000)
  29. Zhang QB, Hua YX, Electrochim. Acta, 54(6), 1881 (2009)
  30. Shyamala M, Arulanantham A, J. Mater. Sci. Technol., 25, 633 (2009)
  31. Amitha Rani BE, Basu BBJ, International J. Corrosion., 1 (2012)
  32. Khaled KF, Electrochim. Acta, 53(9), 3484 (2008)
  33. Nmai CK, Cement & Concrete Composites., 26, 199 (2004)
  34. Allachi H et al., J. Alloys Compd., 491, 223 (2010)
  35. Tauseef A et al., J. Alloys Compd., 489, 596 (2010)
  36. Yin ZF, Yan ML, Bai ZQ, Zhao WZ, Zhou WJ, Electrochim. Acta, 53(22), 6285 (2008)
  37. Baek SY, Kim YW, Chung KW, Yoo SH, Park SJ, Appl. Chem. Eng., 22(2), 196 (2011)
  38. Baek SY, Kim YW, Chung KW, Yoo SH, Appl. Chem. Eng., 22(4), 367 (2011)