| 1 - 10 |
Alkaline deoxygenated graphene oxide for supercapacitor applications: An effective green alternative for chemically reduced graphene
Perera SD, Mariano RG, Nijem N, Chabal Y, Ferraris JP, Balkus KJ |
| 11 - 17 |
Separate in situ measurements of ECA under land and channel in PEM fuel cells
Higier A, Liu HT |
| 18 - 27 |
Analysis and modeling of PEMFC degradation: Effect on oxygen transport
Jomori S, Nonoyama N, Yoshida T |
| 28 - 35 |
Modeling of combined capacity fade with thermal effects for a cycled LixC6-LiyMn2O4 cell
Vazquez-Arenas J, Fowler M, Mao XF, Chen SK |
| 36 - 42 |
Hierarchical composites of sulfonated graphene-supported vertically aligned polyaniline nanorods for high-performance supercapacitors
Ma B, Zhou X, Bao H, Li XW, Wang GC |
| 43 - 47 |
Carbon nanotubes/cobalt sulfide composites as potential high-rate and high-efficiency supercapacitors
Chen CY, Shih ZY, Yang ZS, Chang HT |
| 48 - 52 |
SnO2 nanospheres supported Pd catalyst with enhanced performance for formic acid oxidation
Lu HT, Fan Y, Huang P, Xu DL |
| 53 - 62 |
An optimization study of PtSn/C catalysts applied to direct ethanol fuel cell: Effect of the preparation method on the electrocatalytic activity of the catalysts
Almeida TS, Palma LM, Leonello PH, Morais C, Kokoh KB, De Andrade AR |
| 63 - 68 |
Enhanced rate and high-temperature performance of La0.7Sr0.3MnO3-coated LiNi0.5Mn1.5O4 cathode materials for lithium ion battery
Zhao GY, Lin YB, Zhou T, Lin Y, Huang YD, Huang ZG |
| 69 - 76 |
Experimental study on performance of a planar membrane humidifier for a proton exchange membrane fuel cell stack
Hwang JJ, Chang WR, Kao JK, Wu W |
| 77 - 88 |
Kinetics of oxygen reduction reaction on nanostructured thin-film platinum alloy catalyst
Ahluwalia RK, Wang X, Lajunen A, Steinbach AJ, Hendricks SM, Kurkowski MJ, Debe MK |
| 89 - 98 |
An integrated system combining chemical looping hydrogen generation process and solid oxide fuel cell/gas turbine cycle for power production with CO2 capture
Chen SY, Xue ZP, Wang D, Xiang WG |
| 99 - 108 |
Nanocomposites of gold and poly(3-hexylthiophene) containing fullerene moieties: Synthesis, characterization and application in solar cells
de Freitas JN, Mamo MA, Maubane M, van Otterlo WAL, Coville NJ, Nogueira AF |
| 109 - 115 |
Lithium diffusion in sputter-deposited Li4Ti5O12 thin films
Wunde F, Berkemeier F, Schmitz G |
| 116 - 121 |
Two-phase interface in LiMnPO4 nanoplates
Dong YZ, Wang L, Zhang SL, Zhao YM, Zhou JP, Xie H, Goodenough JB |
| 122 - 129 |
A novel 2,7-diaminofluorene-based organic dye for a dye-sensitized solar cell
Lin LY, Lee CP, Yeh MH, Baheti A, Vittal R, Thomas KRJ, Ho KC |
| 130 - 134 |
Carbon nanofiber supported bimetallic PdAu nanoparticles for formic acid electrooxidation
Qin YH, Jiang Y, Niu DF, Zhang XS, Zhou XG, Niu L, Yuan WK |
| 135 - 144 |
A mathematical model for predicting the life of polymer electrolyte fuel cell membranes subjected to hydration cycling
Burlatsky SF, Gummalla M, O'Neill J, Atrazhev VV, Varyukhin AN, Dmitriev DV, Erikhman NS |
| 145 - 151 |
Quantifying capacity loss due to solid-electrolyte-interphase layer formation on silicon negative electrodes in lithium-ion batteries
Nadimpalli SPV, Sethuraman VA, Dalavi S, Lucht B, Chon MJ, Shenoy VB, Guduru PR |
| 152 - 159 |
Effects of annealing and stoichiometry to (Nd, Mg)(Ni, Al)(3.5) metal hydride alloys
Young K, Ouchi T, Huang B |
| 160 - 163 |
Compositional control of continuously graded anode functional layer
McCoppin J, Barney I, Mukhopadhyay S, Miller R, Reitz T, Young D |
| 164 - 169 |
Flexible, metal-free composite counter electrodes for efficient fiber-shaped dye-sensitized solar cells
Hou SC, Cai X, Wu HW, Lv ZB, Wang D, Fu YP, Zou DC |
| 170 - 178 |
Effect of glutaric anhydride additive on the LiNi0.4Mn1.6O4 electrode/electrolyte interface evolution: A MAS NMR and TEM/EELS study
Wang ZL, Dupre N, Lajaunie L, Moreau P, Martin JF, Boutafa L, Patoux S, Guyomard D |
| 179 - 187 |
The effects of cell assembly compression on the performance of carbon electrochemical double-layer capacitor electrodes
Gourdin G, Jiang T, Smith P, Qu DY |
| 188 - 198 |
Quaternary PtMnCuX/C (X = Fe, Co, Ni, and Sn) and PtMnMoX/C (X = Fe, Co, Ni, Cu and Sn) alloys catalysts: Synthesis, characterization and activity towards ethanol electrooxidation
Ammam M, Easton EB |
| 199 - 215 |
Impact of particle size ratio and volume fraction on effective material parameters and performance in solid oxide fuel cell electrodes
Volker B, McMeeking RM |
| 216 - 220 |
Nitrogen-doped carbon nanotubes as catalysts for oxygen reduction reaction
Xiong C, Wei ZD, Hu BS, Chen SG, Li L, Guo L, Ding W, Liu X, Ji WJ, Wang XP |
| 221 - 226 |
Two-step co-sintering method to fabricate anode-supported Ba3Ca1.18Nb1.82O9-delta proton-conducting solid oxide fuel cells
Wang SW, Zhang LB, Yang Z, Zhang LL, Fang SM, Brinkman K, Chen FL |
| 227 - 232 |
Fabrication of Te@Au core-shell hybrids for efficient ethanol oxidation
Jin HL, Wang DM, Zhao YW, Zhou H, Wang S, Wang JC |
| 233 - 239 |
Platinum oxidation responsible for degradation of platinum-cobalt alloy cathode catalysts for polymer electrolyte fuel cells
Hidai S, Kobayashi M, Niwa H, Harada Y, Oshima M, Nakamori Y, Aoki T |
| 240 - 247 |
The stability of organic solvents and carbon electrode in nonaqueous Li-O-2 batteries
Xu W, Hu JZ, Engelhard MH, Towne SA, Hardy JS, Xiao J, Feng J, Hu MY, Zhang J, Ding F, Gross ME, Zhang JG |
| 248 - 257 |
Development of a lifetime prediction model for lithium-ion batteries based on extended accelerated aging test data
Ecker M, Gerschler JB, Vogel J, Kabitz S, Hust F, Dechent P, Sauer DU |
| 258 - 265 |
Improving the high rate performance of Li4Ti5O12 through divalent zinc substitution
Yi TF, Liu HP, Zhu YR, Jiang LJ, Xie Y, Zhu RS |
| 266 - 273 |
Ex situ testing method to characterize cathode catalysts degradation under simulated start-up/shut-down conditions - A contribution to polymer electrolyte membrane fuel cell benchmarking
Marcu A, Toth G, Kundu S, Colmenares LC, Behm RJ |
| 274 - 278 |
Oxidation and electrical behavior of ferritic stainless steel interconnect with Fe-Co-Ni coating by electroplating
Geng SJ, Qi SJ, Xiang D, Zhu SL, Wang FH |
| 279 - 287 |
Improvement in high-rate dischargeability, activation, and low-temperature performance in multi-phase AB(2) alloys by partial substitution of Zr with Y
Young K, Young M, Ouchi T, Reichman B, Fetcenko MA |
| 288 - 295 |
The effects of temperature on the electrochemical performance of sodium-nickel chloride batteries
Lu XC, Li GS, Kim JY, Lemmon JP, Sprenkle VL, Yang ZG |
| 296 - 300 |
A newly-developed effective direct current assisted sintering technique for electrolyte film densification of anode-supported solid oxide fuel cells
Liu YJ, Hao XM, Wang ZH, Wang JW, Qiao JS, Yan YM, Sun KN |
| 301 - 306 |
Porous YSZ impregnated with La0.4Sr0.5Ba0.1TiO3 as a possible composite anode for SOFCs fueled with sour feeds
Vincent AL, Hanifi AR, Luo JL, Chuang KT, Sanger AR, Etsell TH, Sarkar P |
| 307 - 311 |
Metal supported tubular solid oxide fuel cells fabricated by suspension plasma spray and suspension high velocity oxy-fuel spray
Yoo Y, Wang YL, Deng XH, Singh D, Legoux JG |
| 312 - 316 |
Failure mechanisms of LiNi0.5Mn1.5O4 electrode at elevated temperature
Yoon T, Park S, Mun J, Ryu JH, Choi W, Kang YS, Park JH, Oh SM |
| 317 - 328 |
Enhanced activity of microwave synthesized hierarchical MnO2 for high performance supercapacitor applications
Meher SK, Rao GR |
