화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Applied Chemistry for Engineering, Vol.31, No.1, 103-107, February, 2020
DOI10.14478/ace.2020.1001  Export Citation
산/염기성 물질 주입에 따른 칼슘이온 분리 특성 연구
A Study on the Characteristics of Calcium Ion Separation by Adding Acidic/Basic Reagents
이예환, 김정은1, 김성수1, †
  • 경기대학교 일반대학원 환경에너지공학과
  • 1경기대학교 환경에너지공학과
Ye Hwan Lee, Jeongeun Kim1, and Sung Su Kim1, †
  • Department of Environmental Energy Engineering, Graduate School of Kyonggi University, 154-42 gwanggyosanro, Youngtong-ku, Suwon-si, Gyeonggi-do 16227, Korea
  • 1Department of Environmental Energy Engineering, Kyonggi University, 154-42 gwanggyosanro, Youngtong-ku, Suwon-si, Gyeonggi-do 16227, Korea
E-mail:
초록
본 연구는 대부분의 산업부산물에 다량 포함되어 있는 칼슘이온을 자원화하기 위한 것으로 칼슘이온의 추출 및 분리조건 별 특성을 확인하였다. 칼슘 추출원으로 산화칼슘, 추출용제로 염산을 사용했으며, 추출용제의 농도에 따른 추출량 및 추출액의 pH 변화 특성을 분석하였다. 추출용제의 농도가 높아짐에 따라 추출량은 증가하는 반면 추출액의 pH는 일정하게 유지되는 경향을 나타내었다. 추출된 칼슘이온을 분리하기 위하여 산.염기성 용액 주입하였으며, 침전물 발생 여부와 침전물의 형태에 대하여 분석하였다. 산.염기성 물질 중 황산, 수산화나트륨 용액을 칼슘추출액에 주입하였을 때 침전물이 발생하였으며 각각 CaSO4, Ca(OH)2 형태로 분리되는 것을 확인할 수 있었다.
The purpose of this study is to resource calcium ions contained in most industrial by-products, and confirm the characteristics of calcium ions by extraction and separation conditions. Calcium oxide was used as a calcium extraction source, and hydrochloric acid as an extraction solvent, and the extraction amount according to the concentration of the extraction solvent and the pH dependent characteristics of the extract were analyzed. As the extractant concentration increased, the extracted amount increased while the pH for the extraction was kept constant. In order to separate extracted calcium ions, an acid-basic solution was injected and the formation of precipitates and also the form of precipitates were analyzed. When the sulfuric acid and sodium hydroxide solution of acid and basic substances were injected into the calcium extract, precipitates were formed and separated into CaSO4 and Ca(OH)2 forms.
Keywords:Calcium;Extraction;Separation;pH
  1. Han M, J. Archit. Inst. Korea Struct. Construct., 23(7), 87 (2007)
  2. Hong W, Park Y, Choi M, J. Archit. Inst. Korea Plan. Des., 20(2), 201 (2004)
  3. Moon E, Kim SJ, Park HG, Choi YC, J. Korea Inst. Struct. Maint. Insp., 22(6), 123 (2018)
  4. Yoo K, KIC News, 18(3), 20 (2015)
  5. Sim JS, Lee KG, Kim YT, Kang SK, J. Korean Ceram. Soc., 49(2), 185 (2012)
  6. Han C, Kim S, Hwang Y, Cha C, J. Archit. Inst. Korea Struct. Construct., 20(11), 83 (2004)
  7. Yoo Y, Choi H, Bang JH, Chae S, Kim JW, Kim JM, Lee SW, Appl. Chem. Eng., 28(1), 101 (2017)
  8. Lee M, Jeoung Y, Ryu B, Jung D, J. Korean Soc. Environ. Technol., 18(3), 267 (2017)
  9. Kim CG, Shin HG, Kim SW, J. Korea Org. Resour. Recycl. Assoc., 21(1), 69 (2013)
  10. Lee B, Jang Y, Kim Y, J. Korea Concr. Inst., 25(1), 115 (2013)
  11. Son M, Kim G, Han K, Lee MW, Lim JT, Korean Chem. Eng. Res., 55(2), 141 (2017)
  12. Kim D, Kim M, J. Korea Soc. Waste Manag., 32(4), 317 (2015)
  13. De Cram K, Chiang YW, Van Gerven T, Santos RM, Chem. Eng. Res. Des., 104, 180 (2015)
  14. Lee YH, Lee SH, Hwang IH, Choi SY, Lee SM, Kim SS, Appl. Chem. Eng., 29(1), 43 (2018)
  15. Eloneva S, Teir S, Revitzer H, Salminen J, Said A, Fogelholm CJ, Zevenhoven R, Steel Res. Int., 80(6), 415 (2009)