| 613 - 617 |
Development and module design of a novel membrane process for the removal of chlorine and its associated forms from wastewater
Shin CH, Johnson R |
| 618 - 623 |
The development of a fully integrated micro-channel fuel processor using low temperature co-fired ceramic (LTCC)
Park JJ, Shin Y, Oh JH, Chung CH, Huh YJ, Haama S |
| 624 - 627 |
Analysis of thermally aged adhesion specimen between precured and uncured rubber sheets
Choi SS, Kim JC, Lee HM |
| 628 - 634 |
Mechanical/physical characteristics of polymer mortar recycled from rapid-chilled steel slag
Hwang EH, Ko YS, Kim JM, Hwang TS |
| 635 - 640 |
Characteristics of absorption/regeneration of CO2.SO2 binary systems into aqueous AMP + ammonia solutions
Choi WJ, Min BM, Shon BH, Seo JB, Oh KJ |
| 641 - 644 |
Circular deformation as a means of simultaneously evaluating the compressive and tensile strain in vulcanized rubber
Choi SS, Jang JH, Lee SB, Jang WJ, Oh JS, Lee SH |
| 645 - 648 |
Synthesis of nanometer-sized hexagonal disk-shaped ZnO in formic acid using a hydrothermal method and its optical properties
Lee J, Chae J, Nahm K, Kang M |
| 649 - 652 |
Dehydration of methanol over Nordstrandite based catalysts for dimethyl ether synthesis
Seo CW, Jung KD, Lee KY, Yoo KS |
| 653 - 656 |
Mannich reaction catalyzed by a novel catalyst under solvent-free conditions
Yue CB, Yi TF, Zhu CB, Liu G |
| 657 - 660 |
Poly(vinylidenefluoride)-hexafluoropropylene.methyl N-methylpyrrolidinium-N-acetate trifluoromethanesulfonylimide.lithium trifluoromethanesulfonylimide gel electrolytes
Kim KS, Lee SB, Lee H, Kim HS, Lee Y, Kwack K |
| 661 - 664 |
Accelerated durability test of DMFC electrodes by electrochemical potential cycling
Uhm S, Lee J |
| 665 - 669 |
Influence of Ga addition on the methanol synthesis activity of Cu/ZnO catalyst in the presence and absence of alumina
Kang SH, Bae JW, Sai Prasad PS, Oh JH, Jun KW, Song SL, Min KS |
| 670 - 673 |
Preparation and photocatalytic performance of nano-TiO2-coated beads for methylene blue decomposition
Ha JW, Do YW, Park JH, Han CH |
| 674 - 676 |
Adsorption of methane on porous metal carboxylates
Lee JS, Jhung SH, Yoon JW, Hwang YK, Chang JS |
| 677 - 682 |
Effect of surface morphology of calcium phosphate on osteoblast-like HOS cell responses
Lee WK, Lee SM, Kim HM |
| 683 - 686 |
Pd/Ce(0.9)Cu(0.1)O(1.9)-Y2O3 catalysts for catalytic combustion of toluene and ethyl acetate
Su XW, Jin LY, Lu JQ, Luo MF |
| 687 - 693 |
Influence of soap/polymer concentration ratio on the rheological properties of lithium lubricating greases modified with virgin LDPE
Martın-Alfonso JE, Moreno G, Valencia C, Sanchez MC, Franco JM, Gallegos C |
| 694 - 698 |
Lead zirconium titanate thin films prepared by thermal annealing of multilayer structures composed of PbO, ZrO2 and TiO2
Kang BS, Lee WG |
| 699 - 702 |
The improved electrical conductivity of carbon nanofibers by fluorinated MWCNTs
Im JS, Kim SJ, Kang PH, Lee YS |
| 703 - 706 |
Selective cell adhesion on an ion implanted poly(bisphenol A carbonate) film
Kwon HJ, Jung CH, Hwang IT, Nho YC, Choi JH |
| 707 - 715 |
Effects of hydrothermal aging on SiC-DPF with metal oxide ash and alkali metals
Choi B, Liu B, Jeong JW |
| 716 - 718 |
Influence of nickel oxide nanolayer and doping in organic light-emitting devices
Woo S, Kim J, Cho G, Kim K, Lyu H, Kim Y |
| 719 - 723 |
Preparation of titanium oxide, iron oxide, and aluminium oxide from sludge generated from Ti-salt, Fe-salt and Al-salt flocculation of wastewater
Shon HK, Vigneswaran S, Kandasamy J, Kim JB, Park HJ, Choi SW, Kim JH |
| 724 - 729 |
Preparations of TiO2 pastes and its application to light-scattering layer for dye-sensitized solar cells
Lee JK, Jeong BH, Jang SI, Kim YG, Jang YW, Lee SB, Kim MR |
| 730 - 735 |
Temperature and alkaline hydroxide treatment effects on hydrogen sorption characteristics of multi-walled carbon nanotube-graphite mixture
Kopac T, Erdogan FO |
| 736 - 742 |
Effects of step change of heating source on synthesis of zeolite 4A from coal fly ash
Kim JK, Lee HD |
| 743 - 747 |
Liquefaction of cellulose in the presence of phenol using ρ-toluene sulfonic acid as a catalyst
Muna SP, Jang JP |
| 748 - 751 |
Battery performance of PMMA-grafted PE separators prepared by pre-irradiation grafting technique
Gwona SJ, Choi JH, Sohn JY, Lim YM, Nho YC, Ihm YE |
| 752 - 757 |
Enhanced performance of organic electroluminescence diodes with a 2-TNATA:C60 hole injection layer
Kang HS, Park KN, Cho YR, Park DW, Choe Y |
| 758 - 762 |
Preparations and temperature-dependent release properties of Pluronic F127-containing microcapsules prepared by a double emulsion technique
Hong YJ, Lee HY, Kim JC |
| 763 - 766 |
Multiple internal reflection Fourier transform-infrared spectroscopy study on Si surface for measurement of PSL particles
Yang J, Im K, Lee J, Lim S |
