화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Korean Journal of Chemical Engineering, Vol.33, No.3, 1080-1087, March, 2016
DOI10.1007/s11814-015-0213-9  Export Citation
Green plasticizers derived from soybean oil for poly(vinyl chloride) as a renewable resource material
Puyou Jia, Meng Zhang1, †, Lihong Hu1, and Yonghong Zhou†
  • Institute of Chemical Industry of Forest Products, Chinese Academy of Forest (CAF), Nanjing 210042, P. R. China
  • 1Institute of New Technology of Forestry, Chinese Academy of Forest (CAF), Beijing 100091, P. R. China
E-mail:,
Vegetable oil based plasticizers have potential use as nontoxic and sustainable plasticizer and as replacements for commonly used phthalate plasticizers. In this study, novel soybean oil based polyol esters (derived from glycerin or pentaerythritol, of which two were acetylated and two were additionally epoxidized) were synthesized and characterized with GPC, FT-IR and 1H NMR. Properties of poly (vinyl chloride) (PVC) plasticized with different soybean oil based polyol ester as main plasticizer were evaluated and compared to that of traditional plasticizers dioctyl phthalate (DOP) and epoxidized soybean oil (ESO). It has been proved that thermal stability of PVC blends could be improved by soybean oil based polyol ester plasticizers. Plasticizing effect of pentaerythritol derived soybean oil polyesters on PVC is better than that of DOP, ESO, and glycerin derived soybean oil polyesters. Tests of migration stability showed that with the increasing of the molecular weight, branching degree of molecular and ester bands of soybean oil based polyol ester, the migration stability was enhanced. This study may lead to the development of new type of PVC materials using soybean oil based polyol ester as main plasticizer.
Keywords:Poly (vinyl chloride);Soybean Oil;Plasticizer;Thermal Property;Migration Resistance
  1. Silva MAD, Vieira MGA, Macumoto ACG, Beppu MM, Polym. Test, 30, 478 (2011)
  2. Lindstrom A, Hakkarainen M, J. Appl. Polym. Sci., 104(4), 2458 (2007)
  3. Mackintosh CE, Maldonado JA, Ikonomou MG, Gobas FAPC, Environ. Sci. Technol., 40, 3481 (2006)
  4. Clausen PA, Hansen V, Gunnarsen L, Afshari A, Wolkoff P, Environ. Sci Technol., 38, 2531 (2004)
  5. Janjua NR, Mortensen GK, Andersson AM, Kongshoj B, Tickner JA, Schettler T, Guidotti T, McCally M, Rossi M, J. Ind. Med., 39, 100 (2001)
  6. Sun T, Thom R, J. Elastomer Plast., 42(2), 429 (2010)
  7. Gamage PK, Farid AS, J. Appl. Polym. Sci., 121(2), 823 (2011)
  8. Fenollar O, Garcia-Sanoguera D, Sanchez-Nacher L, Lopez J, Balart R, J. Appl. Polym. Sci., 124(3), 2550 (2012)
  9. Bueno-Ferrer C, Garrigos MC, Jimenez A, Polym. Degrad. Stabil., 95, 2207 (2012)
  10. Karmalm P, Hjertberg T, Jansson A, Dahl R, Polym. Degrad. Stabil., 94, 2275 (2009)
  11. Subbarao K, Lucas S, Michael G, Benjamin W, Dharma K, J. Vinyl. Addit. Techin., DOI:10.1002/vnl.21486
  12. Bhakti M, Mukesh K, Anagha S, J. Appl. Polym. Sci., 32, 17 (2015)
  13. Pedro AO, Jerome MLG, Gaelle WG, Cesar HW, Sergio GE, Otavio B, J. Appl. Polym. Sci., DOI:10.1002/APP.42102. (2015)
  14. Jean-Luc A, Loıc L, Yves-Marie C, J. Appl. Polym. Sci., DOI:10.1002/APP.39983. (2014)
  15. Karmalm P, Hjertberg T, Jansson A, Dahl R, Ankner K, Polym. Degrad. Stabil., 94, 1986 (2009)
  16. Sun B, Chaudhary BI, Shen CY, Mao D, Yuan DM, Dai GC, Li B, Cogen JM, Polym. Eng. Sci., 53(8), 1645 (2013)
  17. Chaudhary BI, Wills S, Mundra M, US Patent, 8,859,654 B2 (2014).
  18. Jia P, Bo C, Hu L, Zhou Y, Korean J. Chem. Eng., 32(3), 547 (2015)
  19. Feng G, Jia P, Zhang L, Hu L, Zhang M, Zhou YH, Korean J. Chem. Eng., 32(6), 1201 (2015)
  20. Puyou J, Meng Z, Lihong H, Caiying B, Yong-Hong Z, J. Therm. Anal. Calorim., 120, 1731 (2015)
  21. Puyou J, Meng Z, Chengguo L, Lihong H, Guodong F, Caiying B, Yonghong Z, RSC Adv., 5, 41169 (2015)
  22. Puyou J, Meng Z, Chengguo L, Lihong H, Yonghong Z, J. Appl. Polym. Sci., DOI:10.1002/APP.42111. (2015)
  23. Liqiang Z, Meng Z, Yonghong Z, Lihong H, Polym. Degrad. Stabil., 98, 2784 (2013)
  24. Meng Z, Hui P, Liqiang Z, Lihong H, Yonghong Z, Ind. Crop. Prod., 59, 135 (2014)
  25. Liqiang Z, Meng Z, Lihong H, Yonghong Z, Ind. Crop. Prod., 52, 380 (2014)
  26. Lindstrom A, Hakkarainen M, J. Appl. Polym. Sci., 100(3), 2180 (2006)
  27. Faria-Machado AF, Silva MAD, Vieira MGA, Beppu MM, J. Appl. Polym. Sci., 27, 3543 (2013)
  28. Lai HJ, Wang ZW, Wu PY, Chaudhary BI, Sengupta SS, Cogen JM, Li B, Ind. Eng. Chem. Res., 51(27), 9365 (2012)
  29. Pratiksha GN, Shashank TM, Vikrant VS, Iran Polym. J., 23, 599 (2014)
  30. Fenollar O, Garcia-Sanoguera D, Sanchez-Nacher L, Lopez J, Balart R, J. Mater. Sci., 45(16), 4406 (2010)
  31. Audic JL, Reyx D, Brosse JC, J. Appl. Polym. Sci., 89(5), 1291 (2003)
  32. Yang BH, Bai YP, Cao YJ, J. Appl. Polym. Sci., 115(4), 2178 (2010)
  33. Yuanhui O, Xuejia D, Long Z, J. Appl. Polym. Sci., DOI:10.1002/APP.39763. (2014)
  34. Chengguo L, Jun L, Wen L, Yonghong Z, Ind. Crop. Prod., 52, 329 (2014)
  35. Sun T, Thom R, J. Elastomer Plast., 42, 129 (2010)
  36. Yao Q, Wilkie CA, J. Vinyl. Addit. Technol., 7, 26 (2001)
  37. Soudais Y, Moga L, Blazek J, Lemort F, J. Anal. Appl. Pyrolysis, 78, 45 (2007)
  38. Li Y, Wang C, Wang G, Qu Z, J. Wuhan Univ. Technol., 2, 101 (2008)
  39. Vickraman P, Ramamurthy S, Mater. Lett., 60, 3431 (2006)
  40. Ramesh S, Teh GB, Louh RF, Hou YK, Sin PY, Yi LG, Sadhana, 35, 87 (2010)