화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Polymer(Korea), Vol.42, No.2, 320-329, March, 2018
DOI10.7317/pk.2018.42.2.320  Export Citation
수분산 폴리우레탄-아크릴 공중합체를 이용한 내부식성 수지
Waterborne Polyurethane Acrylic Copolymer for Anti-Corrosion Resin
이창록, 정은영, 조남주†
  • 부산대학교 고분자공학과
Chang-rok Lee, Eun-Young Jeong, and Nam-Ju Jo†
  • Department of Polymer Science and Engineering, Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan 46241, Korea
E-mail:
초록
Poly(tetramethylene glycol)(PTMG), 4,4′-methylene bis(cyclohexyl isocyanate)(H12MDI), 2,2-dimethylol propionic acid(DMPA)와 caprolactone acrylate(CLA)를 사용하여 수분산 폴리우레탄-아크릴 공중합체(waterborne polyurethane acrylic copolymer, WPUA)를 합성하였다. Fourier transform-infrared spectroscopy(FTIR)와 gel permeation chromatography(GPC)를 통해 WPUA의 합성 여부를 확인하였으며, dynamic light scattering(DLS)과 universal testing machine(UTM) 측정 및 water absorption test를 통해 CLA의 유무와 폴리우레탄 prepolymer의 분자량 변화에 따른 WPUA의 물성 변화를 확인하였다. CLA의 도입으로 WPU의 인장강도와 내수성이 향상되었고 파단 신율은 감소하였다.
Waterborne polyurethane acrylic copolymer (WPUA) was synthesized from the poly(tetramethylene glycol) (PTMG), 4,4′-methylene bis(cyclohexyl isocyanate) (H12MDI), 2,2-dimethylol propionic acid (DMPA), and caprolactone acrylate (CLA). The synthesis of WPUA was confirmed by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). Dynamic light scattering (DLS), universal testing machine (UTM) and water absorption tests were performed to confirm the change of the physical properties of WPUA according to the presence of CLA and the change of molecular weight of PU prepolymer. It was confirmed that the introduction of CLA improved the tensile strength and water resistance of WPU and decreased the elongation at break.
Keywords:waterborne polyurethane;waterborne polyurethane acrylic copolymer;anti-corrosion resin;mechanical strength;water absorption
  1. Lee JD, Kim ST, Choi HU, Lee JS, Shin SG, Lee MS, Lee JH, The development of Cr-free Nanocoating materials, Ministry of Environment, Korea, 2006.
  2. Lee EH, Lee HR, Hwang WS, Kim KG, Principles and prevention of corrosion, Donghwa Technology Publishing Co, Korea, 1999.
  3. Kim YT, Hanyang University Master’s Thesis, Korea, 2011.
  4. Kim BS, Hong MG, Yoo BW, Lee MG, Lee WI, Song KC, Korean Chem. Eng. Res., 50(3), 410 (2012)
  5. Korea Research Institute of Chemical Technology, KOTEF Issue Paper, 7, 1 (2007).
  6. Shin YT, Hong MG, Kim BS, Lee WK, Yoo BW, Lee MG, Song KC, Korean Chem. Eng. Res., 50(2), 191 (2012)
  7. Shin YT, Hong MG, Choi JJ, Lee WK, Lee GB, Yoo BW, Lee MG, Song KC, Korean Chem. Eng. Res., 48(4), 428 (2010)
  8. Shin YT, Hong MG, Choi JJ, Lee WK, Lee GB, Yoo BW, Lee MG, Song KC, Korean Chem. Eng. Res., 48(4), 434 (2010)
  9. Kong HC, Cheong IW, Kim JH, Appl. Chem., 7(1), 13 (2003)
  10. Kang SG, Park CJ, Jang JS, Ryu H, J. Korean Ind. Eng. Chem., 13(1), 46 (2002)
  11. Lee HJ, Kim K, J. Korean Ind. Eng. Chem., 9(4), 491 (1998)
  12. Ebrahimi MV, Barikani M, Mohammad S, Mohaghegh S, Iran. Polym. J., 15, 323 (2006)
  13. Rahman MM, Kim HD, Lee WK, J. Adhes. Sci. Technol., 23(1), 177 (2009)