| 1 |
중공사막을 이용하는 다성분 혼합물 분리공정의 모델링
김신아, 김진국, 이영무, 여영구
Korean Chemical Engineering Research, 53(1), 22, 2015 |
| 2 |
방사선을 이용한 강화 복합 연료전지막 다공성 지지체용 PTFE-g-PAA 제조 및 특성 연구
손준용, 박병희, 송주명, 이영무, 신준화
Polymer(Korea), 37(5), 649, 2013 |
| 3 |
Simulated economics assessment of hollow fiber CO2 separation modules
Jang YA, Lee YM, Yeo YK
Korean Journal of Chemical Engineering, 29(4), 435, 2012 |
| 4 |
방사선을 이용한 실란 가교구조의 유/무기 복합 수소이온 교환막 제조 및 연료전지 성능 평가
이지홍, 손준용, 신동원, 송주명, 이영무, 노영창, 신준화
Polymer(Korea), 36(4), 525, 2012 |
| 5 |
전자빔을 이용한 Poly(dimethyl siloxane)의 개질
강동우, 국인설, 정찬희, 황인태, 최재학, 노영창, 문성용, 이영무
Polymer(Korea), 35(2), 157, 2011 |
| 6 |
Modeling and control of CO2 separation process with hollow fiber membrane modules
Jin HG, Han SH, Lee YM, Yeo YK
Korean Journal of Chemical Engineering, 28(1), 41, 2011 |
| 7 |
Modeling and simulation of hollow fiber CO2 separation modules
Jung HJ, Han SH, Lee YM, Yeo YK
Korean Journal of Chemical Engineering, 28(7), 1497, 2011 |
| 8 |
소수성 플라보노이드인 루테올린을 함유한 Ethosome의 제조 및 특성조사
이상민, 최문재, 이영무, 진병석
Applied Chemistry for Engineering, 21(1), 40, 2010 |
| 9 |
Preparation and Biocompatibility Study of Gelatin/Kappa-carrageenan Scaffolds
Lim YM, Gwon HJ, Choi JH, Shin J, Nho YC, Jeong SI, Chong MS, Lee YM, Kwon IK, Kim SE
Macromolecular Research, 18(1), 29, 2010 |
| 10 |
Modified Sulfonated Poly(arylene ether sulfone) Membranes Prepared via a Radiation Grafting Method for Fuel Cell Application
Park CH, Shin DW, Lee YM, Kang PH, Nho YC
Macromolecular Research, 17(11), 825, 2009 |
| 11 |
In vitro and in vivo Characterization of a Coronary Stent Coated with an Elastic Biodegradable Polymer for the Sustained Release of Paclitaxel
Shin YM, Lim KS, Jin JY, Jeong SI, Lee YM, Shin H, Kim KS
Macromolecular Research, 17(12), 1039, 2009 |
| 12 |
초임계 이산화탄소를 이용한 pH 감응성 하이드로젤 입자의 합성
양주승, 류원선, 이상민, 김규식, 최문재, 이영무, 김범상
Korean Chemical Engineering Research, 47(4), 453, 2009 |
| 13 |
Preparation and Characterization of Temperature-Sensitive Poly(N-isopropylacrylamide)-g-Poly(L-lactide-co-ε-caprolactone) Nanofibers
Jeong SI, Lee YM, Lee J, Shin YM, Shin H, Lim YM, Nho YC
Macromolecular Research, 16(2), 139, 2008 |
| 14 |
Tissue Engineering Using a Cyclic Strain Bioreactor and Gelatin/PLCL Scaffolds
Jeong SI, Lee YM, Shin H
Macromolecular Research, 16(6), 567, 2008 |
| 15 |
Gas Permeation Properties of Hydroxyl-Group Containing Polyimide Membranes
Jung CH, Lee YM
Macromolecular Research, 16(6), 555, 2008 |
| 16 |
Gas Separation of Pyrolyzed Polymeric Membranes: Effect of Polymer Precursor and Pyrolysis Conditions
Jung CH, Kim GW, Han SH, Lee YM
Macromolecular Research, 15(6), 565, 2007 |
| 17 |
Biotin-Conjugated Block Copolymeric Nanoparticles as Tumor-Targeted Drug Delivery Systems
Kim SY, Cho SH, Lee YM, Chu LY
Macromolecular Research, 15(7), 646, 2007 |
| 18 |
Cell Sheet Detachment from Poly(N-vinylcaprolactam-co-N-isopropylacrylamide) Grafted onto Tissue Culture Polystyrene Dishes
Lim YM, Jeun JP, Lee JH, Lee YM, Nho YC
Journal of Industrial and Engineering Chemistry, 13(1), 21, 2007 |
| 19 |
Preparation of Thermo-Responsive and Injectable Hydrogels Based on Hyaluronic Acid and Poly(N-isopropylacrylamide) and Their Drug Release Behaviors
Ha DI, Lee SB, Chong MS, Lee YM, Kim SY, Park YH
Macromolecular Research, 14(1), 87, 2006 |
| 20 |
Novel Sulfonated Poly(arylene ether ketone) Containing Benzoxazole Membranes for Proton Exchange Membrane Fuel Cell
Li J, Lee CH, Park HB, Lee YM
Macromolecular Research, 14(4), 438, 2006 |
| 21 |
Hydroxypropyl-β-cyclodextrin Inclusion Complexes for Transdermal Delivery: Preparation, Inclusion Properties, Stability, and Release Behavior
Cho SH, Kim SY, Lee SI, Lee YM
Journal of Industrial and Engineering Chemistry, 12(1), 50, 2006 |
| 22 |
황련유래 단백질이 함유된 나노리포좀의 제조 및 특성
오승룡, 이상봉, 조계민, 최문재, 진병석, 한용문, 이영무, 심진기
Journal of the Korean Industrial and Engineering Chemistry, 17(1), 52, 2006 |
| 23 |
Effect of Electron BeamIrradiation on Poly(vinylidene fluoride) Films at the Melting Temperature
Lim YM, Kang PH, Lee SM, Kim SS, Jeun JP, Jung CH, Choi JH, Lee YM, Nho YC
Journal of Industrial and Engineering Chemistry, 12(4), 589, 2006 |
| 24 |
Aging Effect of Poly(vinyl alcohol) Membranes Crosslinked with Poly(acrylic acid-co-maleic acid)
Rhim JW, Hwang HS, Kim DS, Park HB, Lee CH, Lee YM, Moon GY, Nam SY
Macromolecular Research, 13(2), 135, 2005 |
| 25 |
Preparation and Charcterization of pH-Sensitive Poly(ethylene oxide) Grafted Methacrylic Acid and Acrylic Acid Hydrogels by γ-ray Irradiation
Lim YM, Lee YM, Nho YC
Macromolecular Research, 13(4), 327, 2005 |
| 26 |
Preparation of Ion Exchange Membranes for Fuel Cell Based on Crosslinked Poly(vinyl alcohol) with Poly(acrylic acid-co-maleic acid)
Kim DS, Park HB, Lee CH, Lee YM, Moon GY, Nam SY, Hwang HS, Yun TI, Rhim JW
Macromolecular Research, 13(4), 314, 2005 |
| 27 |
Anti-complement Effects of Anion-Substituted Poly(vinyl alcohol) Membranes
Ryu KE, Rhim H, Park CW, Chun HJ, Hong SW, Kim YC, Lee YM
Macromolecular Research, 12(1), 46, 2004 |
| 28 |
Properties of Conductive Poly(ethylene oxide) (PEO)/Carbon Black (CB) Composite as a Vapor Sensor
Lim YM, Kang PH, Lee YM, Nho YC
Journal of Industrial and Engineering Chemistry, 10(2), 267, 2004 |
| 29 |
Preparation and Characterization of Sulfonated Poly(phthalazinone ether sulfone ketone) (SPPESK)/Silica Hybrid Membranes for Direct Methanol Fuel Cell Applications
Kim DS, Shin KH, Park HB, Lee YM
Macromolecular Research, 12(4), 413, 2004 |
| 30 |
Preparation of Alginate/Poly(N-isopropylacrylamide) Hydrogels Using Gamma-ray Irradiation Grafting
Lee SB, Seo SM, Lim YM, Cho SK, Lee YM, Nho YC
Macromolecular Research, 12(3), 269, 2004 |
| 31 |
Radiation-Induced Copolymerization of 2-Hydroxyethyl methacrylate and Polyethylene glycol methacrylate, and Its Protein Adsorption and Bacterial Attachment
Kwon OH, Nho YC, Lee YM
Journal of Industrial and Engineering Chemistry, 9(2), 138, 2003 |
| 32 |
Plasma Protein Adsorption to Anion Substituted Poly(vinyl alcohol) Membranes
Ryu KE, Rhim H, Park CW, Chun HJ, Hong SH, Kim JJ, Lee YM
Macromolecular Research, 11(6), 451, 2003 |
| 33 |
Molecular Thermodynamics Approach on Phase Equilibria of Dendritic Polymer Systems
Jang JG, Park HB, Lee YM
Korean Journal of Chemical Engineering, 20(2), 375, 2003 |
| 34 |
Artificial Dermis Composed of Gelatin, Hyaluronic Acid and (1→3),(1→6)-β-Glucan
Lee SB, Jeon HW, Lee YW, Cho SK, Lee YM, Song KW, Park MH, Hong SH
Macromolecular Research, 11(5), 368, 2003 |
| 35 |
골수유래 간엽줄기세포와 점착성 단백질 및 폴리펩타이드가 흡착된 (락티이드/글리콜라이드) 공중합체 지지체와의 상호작용
최진산, 이상진, 장지욱, 강길선, 이영무, 이봉, 이해방
Polymer(Korea), 27(5), 397, 2003 |
| 36 |
Preparation and Characterization of Small Intestine Submucosa Powder Impregnated Poly(L-lactide) Scaffolds: The Application for Tissue Engineered Bone and Cartilage
Khang G, Rhee JM, Shin P, Kim IY, Lee B, Lee SJ, Lee YM, Lee HB, Lee I
Macromolecular Research, 10(3), 158, 2002 |
| 37 |
연료전지용 고분자전해질막
박호범, 이영무
Journal of the Korean Industrial and Engineering Chemistry, 13(1), 1, 2002 |
| 38 |
Effect of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Surface with Different Wettability on Fibroblast Behavior
Lee SJ, Lee YM, Khang G, Kim IY, Lee B, Lee HB
Macromolecular Research, 10(3), 150, 2002 |
| 39 |
Preparation and Characterization of Demineralized Bone Particle Impregnated Poly(L-lactide) Scaffolds
Khang G, Park CS, Rhee JM, Lee SJ, Lee YM, Choi MK, Lee HB, Lee I
Korea Polymer Journal, 9(5), 267, 2001 |
| 40 |
the Effect of Fluid Shear Stress on Endothelial Cell Adhesiveness to Modified Polyurethane Surfaces
Khang G, Lee SJ, Lee YM, Lee JH, Lee HB
Korea Polymer Journal, 8(4), 179, 2000 |
| 41 |
Albumin Release form Multiblock Copolymer Consisting of Poly(γ-benzyl L-glutamate) and Poly(ethylene oxide)
cho CS, Jeong YI, Kim SH, Nah JW, Lee YM, Kang IK, Sung YK
Korea Polymer Journal, 7(3), 203, 1999 |
| 42 |
Lipid Nanospheres Containing Vitamin A or Vitamin E: Evaluation of Their Stabilities and In Vitro Skin Permeability
Kim SY, Lee YM
Journal of Industrial and Engineering Chemistry, 5(4), 306, 1999 |
| 43 |
UV 조사법을 이용한 Polyethylene Gylcol Macromer가 그라프트된 막의 제조와 Bovine Serum Albumin의 막 투과특성
이승희, 심진기, 이영무
Polymer(Korea), 23(3), 434, 1999 |
