연구자 : 홍인권 (단국대학교)
| No. | Article |
|---|---|
| 1 |
녹차추출물이 함유된 천연 자외선차단 크림의 제조: CCD-RSM을 이용한 최적화 이승범, 줘청량, 쉬양, 홍인권 Applied Chemistry for Engineering, 31(5), 532, 2020 |
| 2 |
마이크로웨이브를 이용한 폐식용유로부터 FAME의 제조 : RSM에 의한 공정변수 최적화 홍인권 Applied Chemistry for Engineering, 31(2), 172, 2020 |
| 3 |
비이온성 혼합계면활성제를 이용한 O/W 유화액의 제조 : CCD-RSM을 이용한 최적화 이승범, 리광종, 줘청량, 홍인권 Applied Chemistry for Engineering, 30(5), 606, 2019 |
| 4 |
BBD-RSM을 이용한 민들레로부터 항산화성분의 추출공정 최적화 한경호, 장현식, 홍인권 Applied Chemistry for Engineering, 30(4), 408, 2019 |
| 5 |
금은화와 회화나무꽃으로부터 항산화성분의 추출 : 중심합성계획모델을 이용한 최적화 한경호, 줘청량, 홍인권 Applied Chemistry for Engineering, 30(3), 337, 2019 |
| 6 |
밀싹으로부터 플라보노이드성분의 초음파 추출 : 중심합성계획모델을 이용한 최적화 이승범, 왕효정, 홍인권 Applied Chemistry for Engineering, 29(6), 663, 2018 |
| 7 |
Effects of HLB value on oil-in-water emulsions: Droplet size, rheological behavior, zeta-potential, and creaming index Hong IK, Kim SI, Lee SB Journal of Industrial and Engineering Chemistry, 67, 123, 2018 |
| 8 |
초음파에너지를 이용한 칡으로부터 이소플라보노이드의 추출공정 최적화 이승범, 김수인, 홍인권 Applied Chemistry for Engineering, 29(5), 503, 2018 |
| 9 |
반응표면분석법을 이용한 안젤리카로부터 폴리페놀 성분의 추출공정 최적화 이승범, 박보라, 홍인권 Applied Chemistry for Engineering, 29(3), 325, 2018 |
| 10 |
천연색소 추출공정 최적화를 위한 반응표면분석법의 적용 이승범, 이원재, 홍인권 Applied Chemistry for Engineering, 29(3), 283, 2018 |
| 11 |
반응표면분석법을 이용한 감잎과 엉겅퀴로부터 항산화성분의 추출공정 최적화 이승범, 장현식, 홍인권 Applied Chemistry for Engineering, 28(4), 442, 2017 |
| 12 |
방화용 실란트의 내화성 향상을 위한 첨가제로서 팽창흑연의 개질 홍인권, 이원재, 임현석, 이승범 Applied Chemistry for Engineering, 28(4), 437, 2017 |
| 13 |
비이온성 혼합유화제를 이용한 화장용 크림 유화액의 유화안정성 평가 홍인권, 김수인, 박보라, 최준호, 이승범 Applied Chemistry for Engineering, 27(5), 527, 2016 |
| 14 |
마이크로웨이브 에너지를 이용한 안젤리카로부터 유효성분의 추출 이승범, 김훈기, 전길송, 홍인권 Applied Chemistry for Engineering, 27(3), 280, 2016 |
| 15 |
감잎, 엉겅퀴, 뉴그린으로부터 플라보노이드성분의 추출 홍인권, 박보라, 전길송, 이승범 Applied Chemistry for Engineering, 27(3), 276, 2016 |
| 16 |
Preparation of waste cooking oil based biodiesel using microwave irradiation energy Hong IK, Jeon H, Kim H, Lee SB Journal of Industrial and Engineering Chemistry, 42, 107, 2016 |
| 17 |
천연물로부터 여성갱년기 증상완화를 위한 식물성 에스트로겐의 초음파 추출특성 이승범, 박소연, 전길송, 홍인권 Applied Chemistry for Engineering, 27(2), 217, 2016 |
| 18 |
환원-산화법을 이용한 리드프레임 에칭폐액의 정제과정 설계 이승범, 전길송, 정래윤, 홍인권 Applied Chemistry for Engineering, 27(1), 21, 2016 |
| 19 |
증량제 혼합비율에 따른 네온변압기의 열내구성 평가 홍인권, 전길송, 이승범 Applied Chemistry for Engineering, 26(4), 452, 2015 |
| 20 |
Ethylene Glycol, 1,4-Cyclohexane Dimethanol, Isosorbide와 Terephthalic Acid로 제조되는 바이오기반 삼원공중합체의 미세구조 및 열적 특성 이상묵, 김성기, 홍인권 Polymer(Korea), 39(2), 287, 2015 |
| 21 |
열가소성 차선도장에서 반사유리알의 함침특성 홍인권, 이창근, 이승범 Applied Chemistry for Engineering, 26(2), 199, 2015 |
| 22 |
Curing behavior of polyurethane as a binder for polymer-bonded explosives Lee S, Choi JH, Hong IK, Lee JW Journal of Industrial and Engineering Chemistry, 21, 980, 2015 |
| 23 |
Fuel properties of canola oil and lard biodiesel blends: Higher heating value, oxidative stability, and kinematic viscosity Hong IK, Lee JR, Lee SB Journal of Industrial and Engineering Chemistry, 22, 335, 2015 |
| 24 |
재귀반사도 개선을 위한 MMA계 열경화성 차선도료의 설계 이승범, 이창근, 홍인권 Applied Chemistry for Engineering, 26(4), 439, 2015 |
| 25 |
Polyurethane curing kinetics for polymer bonded explosives: HTPB/IPDI binder Lee S, Choi CH, Hong IK, Lee JW Korean Journal of Chemical Engineering, 32(8), 1701, 2015 |
| 26 |
Extraction of natural dye from Gardenia and chromaticity analysis according to chi parameter Hong IK, Jeon H, Lee SB Journal of Industrial and Engineering Chemistry, 24, 326, 2015 |
| 27 |
재활용 상온아스콘 혼합물의 최적 결합재 개발 홍인권, 전길송, 양창배, 이승범 Applied Chemistry for Engineering, 25(4), 409, 2014 |
| 28 |
Effect of mixed alcohol reactants on ultrasonic alcoholysis of canola oil Hong IK, Jeon H, Lee SB Journal of Industrial and Engineering Chemistry, 20(3), 911, 2014 |
| 29 |
Optimal two-stage single-screw design for polymethyl methacrylate extrusion by taguchi technique Lee H, Lee JW, Hong IK, Lee S Journal of Industrial and Engineering Chemistry, 20(3), 1119, 2014 |
| 30 |
Microcellular foaming of silicone rubber with supercritical carbon dioxide Hong IK, Lee S Korean Journal of Chemical Engineering, 31(1), 166, 2014 |
| 31 |
고농축 복합화약 시뮬란트의 유변학적 특성: 벽면 미끄러짐, 틱소트로피, 유동불안정성 이상묵, 홍인권, 안영준, 이재욱 Polymer(Korea), 38(2), 213, 2014 |
| 32 |
미세구조 해석을 통한 고농축 복합화약 시뮬란트의 유변물성 예측 이상묵, 홍인권, 이재욱, 심정섭 Polymer(Korea), 38(2), 225, 2014 |
| 33 |
고에너지 물질 시뮬란트의 분산도의 In-Line 모니터링 이상묵, 홍인권, 안영준, 이재욱 Polymer(Korea), 38(3), 272, 2014 |
| 34 |
고농축 복합화약 시뮬란트: Exact/Dechlorane 현탁계의 유변물성 이상묵, 홍인권, 이재욱, 이근득 Polymer(Korea), 38(3), 286, 2014 |
| 35 |
Hydroxyl Terminated Polybutadiene/(설탕 또는 탄산칼슘) 현탁계의 유변물성 및 경화특성 이상묵, 홍인권, 이재욱, 정원복 Polymer(Korea), 38(4), 417, 2014 |
| 36 |
Comparison of red, brown and green seaweeds on enzymatic saccharification process Hong IK, Jeon H, Lee SB Journal of Industrial and Engineering Chemistry, 20(5), 2687, 2014 |
| 37 |
Prediction of biodiesel fuel properties from fatty acid alkyl ester Hong IK, Jeon GS, Lee SB Journal of Industrial and Engineering Chemistry, 20(4), 2348, 2014 |
| 38 |
Balancing of plating solution in CuCN electroplating process Hong IK, Park JW, Lee SB Journal of Industrial and Engineering Chemistry, 20(5), 3068, 2014 |
| 39 |
Alcoholysis of canola oil using a short-chain (C1.C3) alcohols Hong IK, Park JW, Kim H, Lee SB Journal of Industrial and Engineering Chemistry, 20(5), 3689, 2014 |
| 40 |
Optimization of barrel plating process for electroless Ni-P plating Hong IK, Kim H, Lee SB Journal of Industrial and Engineering Chemistry, 20(5), 3767, 2014 |
| 41 |
Electrical conductivity enhancement of polycarbonate/poly(styrene-co-acrylonitril)/carbon nanotube composites by high intensity ultrasound Kim SK, Lee JW, Hong IK, Lee S Macromolecular Research, 22(2), 154, 2014 |
| 42 |
Cure kinetics and modeling the reaction of silicone rubber Hong IK, Lee S Journal of Industrial and Engineering Chemistry, 19(1), 42, 2013 |
| 43 |
Properties of ultrasound-assisted blends of poly(ethylene terephthalate) with polycarbonate Hong IK, Lee S Journal of Industrial and Engineering Chemistry, 19(1), 87, 2013 |
| 44 |
Optimization of fish-oil-based biodiesel synthesis Hong IK, Park JW, Lee SB Journal of Industrial and Engineering Chemistry, 19(3), 764, 2013 |
| 45 |
Prediction of solubility parameter from intrinsic viscosity Han KH, Jeon GS, Hong IK, Lee SB Journal of Industrial and Engineering Chemistry, 19(4), 1130, 2013 |
| 46 |
기능성 엘라스토머를 이용한 선형 폴리페닐렌 설파이드의 개질 및 그 특성 김성기, 홍인권, 이상묵 Polymer(Korea), 37(3), 399, 2013 |
| 47 |
SEBS 공중합체를 이용한 선형 PPS/PET 블렌드의 상용화 김성기, 홍인권, 이상묵 Polymer(Korea), 37(3), 405, 2013 |
| 48 |
상용화제의 종류가 선형 PPS/PET 블렌드의 물성에 미치는 영향 김성기, 홍인권, 이상묵 Polymer(Korea), 37(4), 500, 2013 |
| 49 |
Effect of supercritical carbon dioxide as an exfoliation aid on bio-based polyethylene terephthalate glycol-modified/clay nanocomposites Jang K, Lee JW, Hong IK, Lee S Korea-Australia Rheology Journal, 25(3), 145, 2013 |
| 50 |
Barrel plating process specification for undercoating with copper cyanate Han KH, Lee SB, Hong IK Journal of Industrial and Engineering Chemistry, 18(3), 888, 2012 |
| 51 |
Diluent filler particle size effect for thermal stability of epoxy type resin Lee SB, Lee HJ, Hong IK Journal of Industrial and Engineering Chemistry, 18(2), 635, 2012 |
| 52 |
Selection of thinner for epoxy type resins for neon transformer housing Hong IK, Yoon YS, Lee SB Journal of Industrial and Engineering Chemistry, 18(6), 1997, 2012 |
| 53 |
Cooling domain prediction of HFCs and HCFCs refrigerant with Joule-Thomson coefficient Han KH, Noh SP, Hong IK, Park KA Journal of Industrial and Engineering Chemistry, 18(2), 617, 2012 |
| 54 |
운전조건 및 유로형상에 따른 고체고분자형 연료전지의 수소극에서의 수분관리 홍인권, 김선회 Applied Chemistry for Engineering, 22(5), 518, 2011 |
| 55 |
Ultrasonic energy effect on vegetable oil based biodiesel synthetic process Lee SB, Lee JD, Hong IK Journal of Industrial and Engineering Chemistry, 17(1), 138, 2011 |
| 56 |
Comparison of solubility parameters for alkane family obtained using cubic equation of state Park KA, Kim KH, Hong IK Journal of Industrial and Engineering Chemistry, 17(2), 213, 2011 |
| 57 |
다공성 제올라이트 콘크리트의 수질정화 특성 최민지, 성낙국, 박성재, 이정아, 윤홍수, 홍인권 Applied Chemistry for Engineering, 22(3), 332, 2011 |
| 58 |
Thermal deformation of epoxy type resin for neon transformer housing Lee SB, Hong IK Journal of Industrial and Engineering Chemistry, 17(3), 404, 2011 |
| 59 |
Phase Behavior of Sick House Syndrome(SHS) Chemicals Lee SB, Shin MK, Hong IK Journal of Industrial and Engineering Chemistry, 17(3), 554, 2011 |
| 60 |
Optimum process and energy density analysis of canola oil biodiesel synthesis Lee SB, Han KH, Lee JD, Hong IK Journal of Industrial and Engineering Chemistry, 16(6), 1006, 2010 |
| 61 |
Membrane performance comparison in a proton exchange membrane fuel cell (PEMFC) stack Kim S, Hong I Journal of Industrial and Engineering Chemistry, 16(6), 901, 2010 |
| 62 |
천연색소 추출공정에서 추출특성에 따른 목표색의 재현 탁은수, 배민우, 강승현, 배유진, 강수연, 정수경, 홍인권 Applied Chemistry for Engineering, 21(5), 559, 2010 |
| 63 |
Solubility prediction of bioantioxidants for functional solvent by group contribution method Park KA, Lee HJ, Hong IK Journal of Industrial and Engineering Chemistry, 16(3), 490, 2010 |
| 64 |
Effect of ultrasound irradiation on solvent extraction process Kim HJ, Chi MH, Hong IK Journal of Industrial and Engineering Chemistry, 15(6), 919, 2009 |
| 65 |
기능성 용매에 대한 영양성분들의 평형분배 특성 이형진, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 20(3), 346, 2009 |
| 66 |
니켈 표면처리공정에서 전류밀도 효과분석 김용운, 정구형, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 19(2), 228, 2008 |
| 67 |
Effects of humidity and temperature on a proton exchange membrane fuel cell (PEMFC) stack Kim S, Hong I Journal of Industrial and Engineering Chemistry, 14(3), 357, 2008 |
| 68 |
활성화 공정을 경유한 폐각의 흡착특성 이승범, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 19(4), 439, 2008 |
| 69 |
Effect of Flow Field Design on the Performance of a Proton Exchange Membrane Fuel Cell (PEMFC) Kim S, Hong I Journal of Industrial and Engineering Chemistry, 13(5), 864, 2007 |
| 70 |
Tin-Cobalt 합금 도금공정에서 도금물성 향상을 위한 최적 용액조성 디자인 Lee SB, Hong IK Journal of the Korean Industrial and Engineering Chemistry, 17(2), 150, 2006 |
| 71 |
VOCs Degradation Performance of TiO2 Aerogel Photocatalyst Prepared in SCF Drying Hong I Journal of Industrial and Engineering Chemistry, 12(6), 918, 2006 |
| 72 |
Dependence of Particle Size Distribution on the Activation Energy in an Ultrasound-Assisted Synthetic Process Kim WI, Lee SB, Hong IK Journal of Industrial and Engineering Chemistry, 10(5), 845, 2004 |
| 73 |
Synthesis of Monolithic Titania-Silica Composite Aerogels with Supercritical Drying Process Kim WI, Hong IK Journal of Industrial and Engineering Chemistry, 9(6), 728, 2003 |
| 74 |
초음파가 도입된 용매추출공정에서 에너지 밀도 분석 이승범, 이승문, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 14(7), 989, 2003 |
| 75 |
Catalytic Oxidation of VOC Mixtures in Supercritical Fluid Media Lee SB, Hong IK Journal of Industrial and Engineering Chemistry, 9(5), 590, 2003 |
| 76 |
Preparation of Pt/Carbon Catalyst by Colloidal Method and Performance Evaluation Hong IK, Lee SB Journal of Industrial and Engineering Chemistry, 9(4), 366, 2003 |
| 77 |
천연색소 추출 공정의 추출 용매 조성에 의한 색차 효과 박미선, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 13(8), 844, 2002 |
| 78 |
UV/TiO2 광촉매 공정을 이용한 BTX의 분해 특성 정기원, 이승범, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 13(6), 524, 2002 |
| 79 |
고주파 유도가열 원리를 이용한 기상반응기 가열효과 분석 이승범, 홍인권, 천지득 Journal of the Korean Industrial and Engineering Chemistry, 13(4), 385, 2002 |
| 80 |
Selective Catalytic Oxidation of Volatile Organic Solvent Mixtures Lee SB, Chung KW, Hong IK, Kim HJ Journal of Industrial and Engineering Chemistry, 7(4), 193, 2001 |
| 81 |
용매-초음파 하이브리드 공정을 이용한 Carthamin 색소의 추출 특성 김원일, 김진모, 홍인권, 박경애 Journal of the Korean Industrial and Engineering Chemistry, 12(2), 235, 2001 |
| 82 |
아마란스유 추출공정에서 초음파 에너지의 효과 분석 김원일, 정기원, 이승범, 홍인권, 박경애 Journal of the Korean Industrial and Engineering Chemistry, 12(3), 307, 2001 |
| 83 |
초임계 반응매개에서 BTX 촉매산화의 산소몰농도 효과 이승범, 김진모, 홍인권, 김형진 Journal of the Korean Industrial and Engineering Chemistry, 12(5), 511, 2001 |
| 84 |
마이크로웨이브 에너지를 도입한 Styrene/Acrylonitrile 공중합 특성 이경모, 이승범, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 12(5), 569, 2001 |
| 85 |
알콕시실란 함유 아크릴수지 도료의 도막물성 이창근, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 12(8), 846, 2001 |
| 86 |
마이크로웨이브 에너지가 도입된 유화중합특성 김원일, 이승범, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 11(7), 706, 2000 |
| 87 |
마이크로웨이브 에너지를 이용한 현미유 추출공정 평가 이승범, 이경모, 박경애, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 11(1), 99, 2000 |
| 88 |
저온분해공정에서 Styrene-Butadiene Rubber와 폐타이어의 분해 특성 김원일, 김형진, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 11(2), 220, 2000 |
| 89 |
Kinetic Characterization of Thermal Degradation Process for Commercial Rubbers Kim WI, Kim SD, Lee SB, Hong IK Journal of Industrial and Engineering Chemistry, 6(5), 348, 2000 |
| 90 |
초임계유체와 마이크로웨이브를 이용한 선택적 추출공정 평가 박경애, 이승범, 홍인권 Journal of the Korean Industrial and Engineering Chemistry, 11(6), 566, 2000 |
| 91 |
Catalytic Oxidation Kinetics of Vapor Phase BTX over Pt/γ-Al2O3 Lee SB, Kang SL, Lee JD, Hong IK Journal of Industrial and Engineering Chemistry, 5(3), 170, 1999 |
| 92 |
Pore Development of the Activated Carbon Prepared by Steam Activation Process Kim SC, Hong IK Journal of Industrial and Engineering Chemistry, 4(3), 177, 1998 |
| 93 |
Molecular Weight Distribution of Polystyrene Solution With Solvent Density in Ultrasound Induced High Pressure Reactor Kim HJ, Hong IK Journal of Industrial and Engineering Chemistry, 4(1), 39, 1998 |
| 94 |
Depolymerization Behavior for cis-Polyisoprene Rubber in Supercritical Tetrahydrofuran Lee SB, Hong IK Journal of Industrial and Engineering Chemistry, 4(1), 26, 1998 |
| 95 |
Preparation and Performance of the Briquette Type Activated Carbon Based on Bituminous Coal Kim SC, Hong IK, Park KA Journal of Industrial and Engineering Chemistry, 3(3), 218, 1997 |
| 96 |
Adsorption of Nonylphenyl Glycol and Sorbitan Fatty Acid Ester on Carbon Black from Aqueous Solution Lee CW, Kim JH, Hong YH, Jang YH, Hong IK, Hahm YM Journal of Industrial and Engineering Chemistry, 3(2), 79, 1997 |
| 97 |
Silicone Rubber Membrane Preparation by Supercritical Fluid Extraction Method Lee SB, Kim HJ, Jung IH, Hong IK Journal of Industrial and Engineering Chemistry, 1(1), 83, 1995 |